1. Introduction
Thank you for purchasing the Timberland TDWGF2182103 Men's Multifunction Watch. This manual provides essential information for the proper setup, operation, and maintenance of your new timepiece. Please read these instructions carefully to ensure optimal performance and longevity of your watch.
For additional support or information, please visit the official Timberland website or contact customer service.
2. Product Overview
The Timberland TDWGF2182103 is a stylish and functional men's multifunction watch. It features a robust 44mm black-tone case, a sophisticated black dial, and two integrated multifunction sub-dials. The watch is complemented by a genuine black leather strap, embossed with the iconic Timberland tree logo, ensuring both comfort and durability.
3. Setup
3.1 Setting the Time
- Pull the crown (the knob on the side of the watch) out to position 2.
- Rotate the crown clockwise or counter-clockwise to set the hour and minute hands to the correct time.
- Once the time is set, push the crown back into position 1 (normal operating position).
3.2 Setting the Multifunction Sub-dials
The TDWGF2182103 features two multifunction sub-dials. Depending on the specific movement, these may display features such as day of the week, date, or 24-hour time. Refer to the specific instructions below for common adjustments:
- Date Adjustment: Gently pull the crown out to position 1.5 (halfway). Rotate the crown to adjust the date. Push the crown back in when finished. Avoid adjusting the date between 9 PM and 3 AM, as this can damage the movement.
- Day of the Week/24-Hour Sub-dial: These sub-dials often synchronize with the main time setting. If they require independent adjustment, there may be small pushers on the side of the case that can be pressed with a pointed tool (e.g., a toothpick) to advance the respective sub-dial. Consult a professional if unsure.
4. Operating Instructions
4.1 Basic Timekeeping
Once the time and sub-dials are set, the watch will operate continuously. Ensure the crown is fully pushed in to maintain water resistance and prevent accidental time changes.
4.2 Water Resistance
This watch is designed with a certain level of water resistance. Please refer to the markings on the case back for specific water resistance ratings (e.g., 3 ATM, 5 ATM). Generally:
- 3 ATM (30 meters/100 feet): Suitable for everyday use, splash/rain resistant. Not suitable for showering, bathing, swimming, snorkeling, or water-related work.
- 5 ATM (50 meters/165 feet): Suitable for showering and swimming in shallow water. Not suitable for diving or snorkeling.
Always ensure the crown is fully pushed in before any contact with water. Do not operate the crown or pushers when the watch is wet.
5. Maintenance
5.1 Cleaning
To maintain the appearance of your watch:
- Wipe the case and crystal with a soft, dry cloth.
- For the leather strap, avoid excessive moisture. If it gets wet, allow it to air dry naturally, away from direct heat.
- Do not use chemical cleaners, as they can damage the watch's finish or strap material.
5.2 Battery Replacement
The watch is powered by a quartz movement and requires a battery. When the battery runs low, the watch may stop or the second hand might skip. Battery replacement should be performed by a qualified watch technician to avoid damaging the movement or compromising water resistance.
5.3 Storage
When not wearing your watch, store it in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it away from strong magnetic fields, which can affect the accuracy of the movement.
6. Troubleshooting
- Watch not running: Check if the crown is fully pushed in. If the watch still does not run, the battery may need replacement.
- Incorrect time: Ensure the crown is not accidentally pulled out. Reset the time as per Section 3.1.
- Condensation under crystal: This indicates a loss of water resistance. Avoid further contact with water and seek professional service immediately.
For issues not covered here, please contact customer support or a certified watch repair center.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | TDWGF2182103 |
| ASIN | B0CKCZC9KL |
| Case Diameter | 44 mm |
| Case Material | Black-tone |
| Dial Color | Black |
| Strap Material | Genuine Leather |
| Strap Color | Black (with Timberland tree logo embossing) |
| Movement | Quartz (Multifunction) |
| Manufacturer | Geneva Watch Group |
| Package Dimensions | 9.52 x 9.52 x 6.98 cm |
| Item Weight | 65 g |
| First Available Date | May 13, 2024 |
8. Warranty and Support
8.1 Warranty Information
Your Timberland watch is covered by a limited warranty against manufacturing defects. The duration and terms of the warranty may vary by region. Please retain your proof of purchase for warranty claims. The warranty typically does not cover normal wear and tear, accidental damage, battery replacement, or damage resulting from improper use or unauthorized repairs.
8.2 Customer Support
For warranty service, technical assistance, or general inquiries, please contact the authorized Timberland watch distributor or customer service in your region. Contact information can usually be found on the official Timberland website or on the warranty card included with your purchase.
When contacting support, please have your watch model number (TDWGF2182103) and proof of purchase readily available.
