Product Overview
The iSonic CSGJ01-8OZx1 Ultrasonic Jewelry/Eye Wear Cleaning Solution Concentrate is designed to enhance the cleaning performance of ultrasonic cleaners. This concentrated solution effectively removes smudges, lotions, and fingerprints, restoring sparkle and clarity to various items.
Image: A bottle of iSonic CSGJ01-8OZx1 Ultrasonic Jewelry/Eye Wear Cleaning Solution Concentrate. The bottle is blue and clear, showing the liquid inside, with a white cap and a label detailing the product name and usage instructions.
This product is formulated to be biodegradable and phosphorus-free, making it suitable for regular use. It is highly concentrated, requiring only a small amount to be mixed with water for effective cleaning.
Safety Information
Always read and understand all instructions before using this product. Keep out of reach of children. Avoid ingestion. In case of eye contact, flush with water immediately. If irritation persists, seek medical attention.
Image: A circular label with a green leaf icon and the text "NON-TOXIC", indicating the product's safety feature.
This product is biodegradable and does not contain phosphorus. Store in a cool, dry place away from direct sunlight.
Setup
Before using the iSonic cleaning solution, ensure you have an ultrasonic cleaner and a clean, stable surface for operation.
- Prepare the Ultrasonic Cleaner: Ensure your ultrasonic cleaner is clean and empty.
- Dilute the Solution: The iSonic CSGJ01-8OZx1 is a concentrate. Mix the solution with tap water at a ratio of 1:20 to 1:40. For most personal ultrasonic cleaners, a capful of the concentrate is sufficient for approximately 1 pint (20 ounces) of water.
- Fill the Tank: Carefully pour the diluted solution into the ultrasonic cleaner's tank, ensuring not to exceed the maximum fill line.
Image: A visual guide showing four steps: 1. Fill with water & solution, 2. Place the jewelry/retainer, 3. Run the cleaner, 4. Enjoy the sparkle. This illustrates the setup and operating process.
Operating Instructions
Follow these steps for optimal cleaning results:
- Place Items in Basket: Gently place the items to be cleaned (jewelry, eyeglasses, watches, etc.) into the cleaning basket of your ultrasonic cleaner. Ensure items are fully submerged in the solution but do not overcrowd the basket.
- Start Cleaning Cycle: Close the lid of the ultrasonic cleaner and start the cleaning cycle according to your cleaner's instructions. The duration of the cycle may vary depending on the item and the level of dirt.
- Rinse Items: Once the cleaning cycle is complete, carefully remove the basket and rinse the cleaned items thoroughly under clean tap water.
- Dry Items: Dry the items with a soft, lint-free cloth. Observe the restored sparkle and clarity.
Image: A hand pouring the blue iSonic cleaning solution concentrate into an ultrasonic cleaner, demonstrating the dilution step before cleaning.
The solution is effective for various items including diamonds, other jewelry, watches, and eyeglasses. It is also suitable for general cleaning purposes.
Maintenance
Proper maintenance of your cleaning solution and ultrasonic cleaner ensures longevity and consistent performance.
- Solution Replacement: Replace the cleaning solution in your ultrasonic cleaner regularly, especially when it appears cloudy or dirty, to maintain optimal cleaning effectiveness.
- Cleaner Maintenance: Refer to your ultrasonic cleaner's manual for specific cleaning and maintenance instructions. Always unplug the cleaner before cleaning its tank.
- Storage: Store the iSonic CSGJ01-8OZx1 concentrate bottle in a cool, dry place, away from direct sunlight and out of reach of children. Ensure the cap is tightly sealed after each use.
Troubleshooting
If you encounter issues, consider the following common solutions:
- Items Not Clean Enough:
- Ensure the solution is properly diluted (1:20 to 1:40 ratio).
- Increase the cleaning cycle duration.
- Replace old or dirty cleaning solution with fresh solution.
- Ensure items are fully submerged and not overcrowded.
- Residue on Items:
- Rinse items thoroughly with clean water after cleaning.
- Ensure the ultrasonic cleaner's tank is clean before adding solution.
- Solution Appears Cloudy Quickly:
- This indicates effective cleaning and removal of contaminants. Replace the solution as needed.
Specifications
| Feature | Detail |
|---|---|
| Product Name | iSonic Ultrasonic Jewelry/Eye Wear Cleaning Solution Concentrate |
| Model Number | CSGJ01-8OZx1 |
| Brand | iSonic |
| Item Form | Liquid |
| Scent | Unscented |
| Specific Uses | Jewelry, Eyewear, Watches, General Cleaning |
| Concentration Ratio | 1:20 to 1:40 with tap water |
| Volume | 8 fluid ounces (approx. 0.24 L) |
| Product Dimensions | 2 x 2 x 8 inches |
| Weight | 9.17 ounces |
| Material Feature | Biodegradable, Phosphorus-free |
| Manufacturer | iSonic |
| First Available Date | August 26, 2013 |
Warranty and Support
For information regarding product warranty, please refer to the official iSonic website or contact iSonic customer support directly. Unauthorized dealers' products are not approved by iSonic, and purchasing from them may void any implied warranty.
For technical support or inquiries, please visit the iSonic Store on Amazon or their official website.
