TOTAL TIDLI20031 20V Lithium-Ion Impact Drill User Manual

Introduction

This manual provides essential instructions for the safe operation, maintenance, and troubleshooting of your TOTAL TIDLI20031 20V Lithium-Ion Impact Drill. Please read this manual thoroughly before using the tool to ensure proper and safe usage. Keep this manual for future reference.

General Safety Instructions

Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury.

• Work Area Safety: Keep the work area clean and well-lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Electrical Safety: Avoid body contact with earthed or grounded surfaces. Do not expose power tools to rain or wet conditions.
• Personal Safety: Always wear eye protection. Use hearing protection when operating the tool for extended periods. Dress properly; avoid loose clothing or jewelry.
• Tool Use and Care: Do not force the power tool. Use the correct power tool for your application. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
• Battery Tool Use and Care: Recharge only with the charger specified by the manufacturer. Use power tools only with specifically designated battery packs.

Product Overview

The TOTAL TIDLI20031 is a 20V Lithium-Ion impact drill designed for various drilling and fastening tasks in wood, metal, and masonry. It features variable speed, adjustable torque settings, and an impact function for demanding applications.

Image Description: This image displays the TOTAL TIDLI20031 20V Lithium-Ion Impact Drill, its two 20V 2.0Ah Lithium-Ion batteries, a protective carrying case, and a set of drill bits. The drill itself is teal and grey, highlighting its chuck, torque collar, and trigger. The "Impact Function" is also indicated near the chuck. The batteries are also teal and grey, labeled "20V MAX 2.0Ah SHARE". The carrying case is grey with the "TOTAL" logo. This visual representation shows the complete kit included with the product.

Key Components:

• Chuck: Holds drill bits and other accessories.
• Torque Adjustment Collar: Allows selection of desired torque setting or drill/impact mode.
• Variable Speed Trigger: Controls the drilling speed.
• Forward/Reverse Switch: Changes the rotation direction.
• Battery Pack: 20V Lithium-Ion battery.
• LED Work Light: Illuminates the work area.

Setup

1. Charging the Battery

1. Ensure the battery charger is connected to a suitable power outlet.
2. Slide the 20V Lithium-Ion battery pack into the charger.
3. Allow the battery to charge fully before first use. Refer to the charger's indicator lights for charging status.
4. Once charged, remove the battery from the charger.

2. Installing/Removing the Battery Pack

• Installation: Align the battery pack with the base of the drill handle and slide it in until it clicks securely into place.
• Removal: Press the battery release button (usually located on the sides of the battery pack) and slide the battery pack out of the drill handle.

3. Installing/Removing Drill Bits or Accessories

1. Ensure the drill is switched off and the battery pack is removed for safety.
2. Rotate the chuck counter-clockwise to open the jaws.
3. Insert the desired drill bit or accessory into the chuck, ensuring it is centered.
4. Rotate the chuck clockwise to tighten the jaws firmly around the bit. Hand-tighten securely.
5. To remove, rotate the chuck counter-clockwise and pull the bit out.

Operating Instructions

1. Selecting Operating Mode and Torque

The torque adjustment collar allows you to select between different torque settings for screwdriving, a drill mode for general drilling, and an impact drill mode for masonry.

• Screwdriving: Rotate the collar to one of the numbered settings (e.g., 1-23). Lower numbers are for smaller screws and softer materials; higher numbers are for larger screws and harder materials.
• Drilling: Rotate the collar to the drill symbol. This provides maximum torque without the clutch engaging.
• Impact Drilling: Rotate the collar to the hammer symbol. This mode activates the impact mechanism for drilling into masonry.

2. Forward/Reverse Rotation

The forward/reverse switch, located above the trigger, controls the direction of rotation.

• Push the switch to the left for forward rotation (for drilling and tightening screws).
• Push the switch to the right for reverse rotation (for removing screws or freeing jammed bits).
• Center the switch to lock the trigger and prevent accidental starting.

3. Variable Speed Control

The drill features a variable speed trigger. The further you press the trigger, the faster the drill rotates.

• Start with a slow speed for precise starting or when working with delicate materials.
• Increase speed as needed for efficient drilling or fastening.

4. LED Work Light

The integrated LED work light automatically illuminates the work area when the trigger is pressed, improving visibility in dimly lit conditions.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your drill.

• Cleaning: Keep the ventilation openings clear and free of dust. Use a soft, damp cloth to clean the tool casing. Do not use harsh chemicals or abrasive cleaners.
• Chuck Maintenance: Periodically clean the chuck jaws to ensure proper gripping of bits.
• Battery Care: Store batteries in a cool, dry place away from direct sunlight. Do not store fully discharged batteries for extended periods.
• Storage: When not in use, store the drill, batteries, and charger in a dry, secure location, preferably in its original carrying case.

Troubleshooting

If the problem persists after attempting these solutions, please contact Total customer support.

Specifications

Warranty and Support

For warranty information, service, or technical support, please refer to the warranty card included with your product or visit the official Total website. Keep your purchase receipt as proof of purchase for any warranty claims.

Manufacturer: Total

Part Number: 202305009908