Introduction
This user manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your Monarch Specialties I 9650 Table Lamp Set. This set includes two contemporary table lamps, each featuring a black metal base, a beige fabric cylinder drum shade, a pull chain switch, and an integrated USB charging port. Please read this manual thoroughly before use to ensure safe and proper operation.
Safety Information
Please observe the following safety precautions to prevent injury or damage to the product:
- Ensure the power supply is disconnected before assembly, cleaning, or bulb replacement.
- Use only bulbs that meet the specified wattage and base type (E26, max 40W).
- Do not expose the lamp to water or excessive moisture. This product is for indoor use only.
- Keep the lamp away from flammable materials.
- Do not attempt to modify or repair the lamp yourself. Contact qualified service personnel for assistance.
- Position the cord safely to avoid tripping hazards.
- Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Package Contents
Verify that all components are present and undamaged before proceeding with assembly.
- 2 x Table Lamp Bases with integrated USB ports
- 2 x Fabric Cylinder Drum Shades
- Assembly Instructions
Image: The complete set of two Monarch Specialties I 9650 table lamps, showcasing their black metal bases, slender stems, and beige fabric cylinder shades. Each lamp includes a pull chain switch.
Setup and Assembly
Minor assembly is required. Follow these steps to set up your table lamps:
- Unpack Components: Carefully remove all parts from the packaging and place them on a clean, flat surface.
- Attach Shade: Secure the fabric cylinder drum shade to the lamp base. Ensure it is centered and stable.
- Install Bulb: Insert one E26 base bulb (not included, maximum 40W) into the lamp socket. Do not overtighten.
- Position Lamp: Place the assembled lamp on a stable, level surface.
- Connect Power: Plug the 6-foot power cord into a standard 120V electrical outlet.
Image: A technical drawing illustrating the dimensions of the Monarch Specialties I 9650 table lamp, including its height of 16.75 inches, shade dimensions of 7x7x8 inches, and base dimensions of 4.5x4.5x1 inches.
Operating Instructions
Your Monarch Specialties I 9650 Table Lamp is designed for simple operation.
- Turning On/Off: Use the pull chain switch located beneath the bulb socket to turn the lamp on or off. A single pull will toggle the light.
- Using the USB Charging Port: The lamp base includes a USB port for charging compatible electronic devices. Simply connect your device's USB cable to the port. The USB port functions independently of the lamp's light, meaning you can charge devices even when the lamp is off, as long as the lamp is plugged into a power outlet.
Image: A detailed view of the black metal base of the lamp, highlighting the integrated USB charging port for convenient device charging.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your lamp.
- Cleaning: Disconnect the lamp from the power source before cleaning. Use a soft, dry cloth to wipe the metal base and shade. Do not use abrasive cleaners or solvents, as these may damage the finish.
- Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled before attempting to replace it. Unscrew the old bulb and screw in a new E26 base bulb, not exceeding 40W.
Troubleshooting
If you encounter issues with your lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. |
|
|
| USB port is not charging devices. |
|
|
| Lamp flickers. |
|
|
Specifications
| Model Number | I 9650 |
| Brand | Monarch Specialties |
| Dimensions (each lamp) | 7"L x 7"W x 16.75"H |
| Base Dimensions | 4.5"L x 4.5"W x 1"H |
| Shade Dimensions | 7"L x 7"W x 8"H |
| Materials | Metal (Base), Linen (Shade) |
| Color | Black (Base), Beige (Shade) |
| Bulb Type | E26 Base (Bulb not included) |
| Max Wattage | 40W |
| Voltage | 120V |
| Power Source | Corded Electric |
| Cord Length | 6 ft |
| Switch Type | Pull Chain |
| Special Features | Integrated USB Charging Port |
| Item Weight (each) | 2 Pounds |
| Indoor/Outdoor Usage | Indoor |
| UPC | 680796090098 |
Warranty Information
Monarch Specialties provides a 2-year limited warranty against manufacturer's defects for this product. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accidents, unauthorized repairs, or normal wear and tear. Please retain your proof of purchase for warranty claims.
Support
For further assistance, technical support, or warranty inquiries, please contact Monarch Specialties customer service. Refer to the contact information provided with your purchase or visit the official Monarch Specialties website for current support details.
Please note: Product specifications and features are subject to change without prior notice.
