Juskys 70L Motion Sensor Kitchen Bin Instruction Manual

1. Product Overview

The Juskys 70L Motion Sensor Kitchen Bin is designed for hygienic and convenient waste disposal. Featuring an automatic lid with an integrated motion sensor, it offers touchless operation. Its durable stainless steel body and sturdy plastic lid ensure longevity, while the spacious 70-liter capacity and internal clamp ring provide practical use for daily household waste.

Figure 1: Key features of the Juskys 70L Motion Sensor Kitchen Bin.

2. Safety Instructions

• Do not immerse the lid or electronic components in water. Clean with a damp cloth only.
• Ensure the battery compartment is securely closed to prevent moisture ingress.
• Use only 4x 1.5V AA batteries. Do not mix old and new batteries, or different types of batteries.
• Keep the sensor area clear of obstructions to ensure proper operation.
• This product is intended for indoor use only.
• Keep out of reach of children and pets to prevent accidental activation or damage.

3. Package Contents

Please check that all items are present in the package:

• 1x Juskys 70L Motion Sensor Kitchen Bin (Stainless Steel Body)
• 1x Sensor Lid (with integrated motion sensor and control panel)
• 1x Inner Clamp Ring for trash bags
• 1x Instruction Manual

Note: 4x 1.5V AA batteries are not included and must be purchased separately.

4. Setup

1. Unpack the Bin: Carefully remove all components from the packaging.
2. Install Batteries:
   • Locate the battery compartment on the underside of the sensor lid.
   • Open the compartment cover.
   • Insert 4x 1.5V AA batteries, ensuring correct polarity (+/-).
   • Close the battery compartment cover securely.
   

   Figure 2: Battery compartment and sensor on the lid.

3. Attach the Lid: Place the sensor lid onto the stainless steel bin body, ensuring it sits flush and is properly aligned.
4. Insert Trash Bag:
   • Lift the inner clamp ring from the bin.
   • Place a 70-liter trash bag into the bin.
   • Fold the top edge of the trash bag over the clamp ring.
   • Carefully lower the clamp ring with the attached trash bag back into the bin, ensuring the bag is securely held in place and does not slip.
   

   Figure 3: Securing the trash bag with the clamp ring.

   

   Figure 4: Inserting a trash bag.

5. Operating Instructions

5.1 Motion Sensor Operation

The bin features an integrated motion sensor for automatic, contactless lid opening and closing.

1. Automatic Opening: Wave your hand or approach the sensor area (located on the front of the lid) within approximately 10-15 cm. The lid will open automatically.
2. Automatic Closing: The lid will close automatically after approximately 5 seconds of inactivity.

Figure 5: Activating the motion sensor.

5.2 Manual Operation (Touch Control Panel)

For extended opening or manual control, use the touch control panel on the lid.

• Open Button: Press the "OPEN" button on the control panel to open the lid manually. The lid will remain open until you press the "CLOSE" button.
• Close Button: Press the "CLOSE" button to close the lid manually.

6. Maintenance

• Cleaning the Body: Wipe the stainless steel body with a soft, damp cloth and a mild detergent. Avoid abrasive cleaners or scouring pads, which can scratch the surface. Dry thoroughly.
• Cleaning the Lid: Clean the sensor lid with a slightly damp cloth. Do not submerge the lid in water or allow water to enter the battery compartment or sensor area.
• Battery Replacement: When the lid's operation becomes slow or inconsistent, it's time to replace the batteries. Follow the steps in Section 4.2.
• Sensor Care: Keep the motion sensor clean and free from dust or debris to ensure optimal performance.

7. Troubleshooting

8. Specifications

Figure 6: Product Dimensions.

9. Warranty and Support

For warranty information or technical support, please refer to the contact details provided by your retailer or visit the official Juskys website. Keep your proof of purchase for any warranty claims.

Manufacturer: Juskys Gruppe GmbH