D-Link DWR-930M 4G LTE Mobile Router User Manual

1. Product Overview

The D-Link DWR-930M 4G LTE Mobile Router provides high-speed mobile internet access, allowing you to share a 4G LTE connection with multiple Wi-Fi devices. Its compact design makes it suitable for travel and on-the-go connectivity.

Figure 1: Front view of the D-Link DWR-930M 4G LTE Mobile Router, showing the D-Link logo and indicator lights for battery, Wi-Fi, SMS, and 4G LTE signal strength.

Key Features:

• Compatible with 802.11n/g/b wireless devices.
• Connect up to 8 Wi-Fi devices simultaneously.
• Up to 10 hours of battery life on a single charge.
• Compact and portable design for easy transport.
• WPA/WPA2 Wi-Fi security protocols for enhanced network protection.
• Built-in firewall to help prevent unauthorized access.
• Wi-Fi Protected Setup (WPS) for convenient one-touch setup.
• Micro-USB port for charging.

2. Package Contents

Ensure all items are present in your DWR-930M package:

• D-Link DWR-930M 4G LTE Mobile Router
• Micro-USB Charging Cable
• Quick Install Guide
• Safety Information

If any items are missing or damaged, please contact your retailer.

3. Device Layout

Figure 2: Angled view of the D-Link DWR-930M, highlighting the Micro-USB port, SIM card slot, and power/WPS buttons.

Front Panel Indicators:

• Battery Indicator: Displays current battery level.
• Wi-Fi Indicator: Shows Wi-Fi status (on/off, data activity).
• SMS Indicator: Notifies of new messages.
• 4G LTE Signal Strength: Indicates the strength of the mobile network signal.

Side/Rear Panel:

• Micro-USB Port: Used for charging the device.
• SIM Card Slot: Insert your 4G LTE SIM card here.
• Power Button: Press and hold to power on/off the device.
• WPS Button: For quick and secure Wi-Fi connection with WPS-compatible devices.

4. Setup

4.1 Inserting the SIM Card

1. Ensure the DWR-930M is powered off.
2. Locate the SIM card slot on the device.
3. Carefully insert your standard-sized 4G LTE SIM card into the slot until it clicks into place. Ensure the gold contacts are facing down.
4. Close the SIM card slot cover securely.

4.2 Charging the Device

1. Connect the Micro-USB charging cable to the Micro-USB port on the DWR-930M.
2. Connect the other end of the cable to a USB power adapter (not included) or a computer's USB port.
3. The battery indicator will show charging status. A full charge typically takes several hours.

4.3 Powering On/Off

• To Power On: Press and hold the Power button for approximately 3 seconds until the indicators light up.
• To Power Off: Press and hold the Power button for approximately 3 seconds until the indicators turn off.

4.4 Connecting to Wi-Fi

1. Power on the DWR-930M.
2. On your Wi-Fi enabled device (smartphone, tablet, laptop), search for available Wi-Fi networks.
3. Select the network name (SSID) of your DWR-930M. The default SSID and Wi-Fi password are usually found on a label inside the battery compartment or on the device itself.
4. Enter the Wi-Fi password when prompted.
5. Alternatively, you can use WPS for a quick connection if your device supports it. Press the WPS button on the DWR-930M, then activate WPS on your client device within two minutes.

5. Operating Instructions

5.1 Accessing the Web Interface

To manage advanced settings, access the web-based management interface:

1. Connect your device to the DWR-930M's Wi-Fi network.
2. Open a web browser and enter the default IP address (e.g., 192.168.0.1 or 192.168.1.1) into the address bar. Refer to the device label or Quick Install Guide for the exact IP address.
3. Enter the default username and password (usually admin for both).
4. You can now configure settings such as Wi-Fi name, password, security, and more.

5.2 Changing Wi-Fi Settings

Within the web interface, navigate to the Wi-Fi settings section to:

• Change the Wi-Fi Network Name (SSID).
• Update the Wi-Fi Password (WPA/WPA2-PSK key).
• Adjust security settings.
• Enable or disable Wi-Fi Protected Setup (WPS).

5.3 Managing Connected Devices

The web interface typically provides a list of currently connected devices. You can monitor their connection status and, in some cases, manage their access.

6. Maintenance

• Regular Charging: To maintain battery health, avoid completely draining the battery frequently. Charge the device regularly.
• Firmware Updates: Periodically check the D-Link support website for firmware updates. Updating the firmware can improve performance, add new features, and enhance security.
• Cleaning: Use a soft, dry cloth to clean the device. Avoid using liquid cleaners or abrasive materials.
• Storage: When not in use for extended periods, store the device in a cool, dry place.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information and technical support, please refer to the warranty card included in your product package or visit the official D-Link support website:

Visit D-Link Support

You can also find additional resources, FAQs, and driver downloads on their website.