Introduction
Thank you for choosing the Mars Gaming MMW-ERGOPRO Wireless Ergonomic Vertical Mouse. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your new device. The MMW-ERGOPRO is designed for comfort and precision, featuring a vertical, folded pro-grip design, a 3200 DPI optical sensor, and durable Huano switches, all connected via reliable 2.4 GHz wireless technology.
Setup
- Insert Battery: Open the battery compartment on the underside of the mouse and insert one (1) AA battery. Ensure correct polarity.
- Connect USB Receiver: Locate the 2.4 GHz USB receiver, typically stored within the mouse's battery compartment or a dedicated slot. Plug the USB receiver into an available USB port on your computer or compatible device.
- Power On: Turn on the mouse using the power switch located on its underside. The device should automatically connect to the USB receiver.
- Driver Installation: Your operating system should automatically detect and install the necessary drivers. No additional software installation is typically required.
Operating Instructions
Ergonomic Design
The MMW-ERGOPRO features a vertical, folded pro-grip design engineered to provide optimal stability and ergonomics, reducing wrist strain during extended use. This design promotes a natural hand and wrist posture.
DPI Adjustment
The mouse is equipped with a 3200 DPI optical sensor, allowing you to adjust cursor speed and accuracy. You can cycle through preset DPI levels: 1200, 2400, and 3200 DPI. Use the dedicated DPI button (usually located near the scroll wheel) to switch between these settings to match your task requirements.
Huano Switches
The MMW-ERGOPRO incorporates Huano switches, known for their professional durability and responsive click feedback, ensuring a consistent and reliable performance over time.
2.4 GHz Wireless Technology
The mouse utilizes 2.4 GHz wireless technology for a secure and stable connection, minimizing latency and ensuring a reliable signal for uninterrupted use.
Maximum Autonomy
To conserve battery life, the MMW-ERGOPRO includes a built-in standby function. The mouse will automatically enter a low-power state when not in use, maximizing the lifespan of your AA battery.
Multi-Platform Compatibility
This mouse offers broad compatibility across various platforms, including PC, MAC, PS5, PS4, Xbox One, and Xbox X-S SERIES, making it a versatile input device for multiple setups.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the mouse. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the device. Avoid harsh chemicals or abrasive materials.
- Battery Replacement: When the mouse's performance degrades or it stops responding, replace the AA battery. Always dispose of used batteries responsibly according to local regulations.
- Storage: When not in use for extended periods, turn off the mouse to further conserve battery life. Store the USB receiver safely, preferably within the mouse's dedicated slot.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mouse not responding | Low or dead battery; USB receiver disconnected; mouse powered off. | Replace the AA battery. Ensure the USB receiver is securely plugged into a working USB port. Turn on the mouse. |
| Intermittent connection or lag | Interference from other wireless devices; receiver too far from mouse; low battery. | Move the receiver closer to the mouse. Avoid using the mouse near strong sources of wireless interference. Replace battery. |
| Cursor movement is erratic or imprecise | Dirty optical sensor; unsuitable surface; incorrect DPI setting. | Clean the optical sensor on the underside of the mouse. Use the mouse on a clean, non-reflective surface or a mouse pad. Adjust DPI settings using the DPI button. |
| Mouse not recognized by device | USB port issue; device compatibility issue. | Try a different USB port. Ensure your device (PC, MAC, console) is compatible with the mouse. Restart your computer/device. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | MMWERGOPROW |
| Brand | Mars Gaming |
| Colour | White |
| Connectivity Technology | 2.4 GHz Wireless (Funkfrequenz) |
| Movement Detection Technology | Optical |
| Maximum Sensitivity (DPI) | 3200 (Adjustable: 1200, 2400, 3200) |
| Number of Buttons | 6 |
| Hand Orientation | Right |
| Compatible Devices | Personal Computer, Gaming Console (PS5, PS4, Xbox One, Xbox X-S SERIES) |
| Operating System Compatibility | Windows, macOS, Linux |
| Wireless Range | Up to 33 feet (approx. 10 meters) |
| Power Source | Battery Powered (1x AA battery, not included) |
| Item Weight | 100 Grams |
| Item Dimensions (L x W) | 14L x 9W centimetres |
Warranty and Support
Mars Gaming products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service inquiries, please refer to the official Mars Gaming website or contact your local retailer. Keep your proof of purchase for warranty claims.
Online Support: www.marsgaming.eu