1. Introduction
This manual provides essential instructions for the safe and efficient operation of your Motorola Solutions R2 Two-Way Radio, model AAH11JDC9JA2N. Please read this manual thoroughly before using the radio to ensure proper functionality and to understand all features.
The Motorola Solutions R2 is a digital two-way radio designed for reliable communication, featuring 64 channels and operating in the VHF 136-174MHz frequency range. It is built for durability and clear audio performance in various environments.

Figure 1: Front view of the Motorola Solutions R2 Two-Way Radio.
2. Package Contents
Verify that your package contains the following items:
- Motorola Solutions R2 Two-Way Radio (Model AAH11JDC9JA2N)
- Microphone
- (Note: Battery, antenna, and charger may be sold separately or included depending on specific package configuration.)
3. Setup
3.1. Attaching the Antenna
- Align the threaded end of the antenna with the antenna connector on top of the radio.
- Turn the antenna clockwise until it is finger-tight. Do not overtighten.
3.2. Installing the Battery (if applicable)
- Ensure the radio is powered off.
- Align the battery with the battery compartment on the back of the radio.
- Slide the battery into place until it clicks securely.
3.3. Charging the Battery
Before initial use, fully charge the radio's battery. Use only Motorola Solutions approved chargers.
- Place the radio (with battery installed) into the charging tray.
- Ensure the charging indicator light illuminates, indicating proper charging.
- A full charge typically takes several hours. Refer to your charger's manual for specific charging times.
4. Operation
4.1. Power On/Off and Volume Control
- To power on the radio, rotate the On/Off/Volume knob clockwise until you hear a click.
- Continue rotating the knob clockwise to increase the volume, and counter-clockwise to decrease it.
- To power off, rotate the knob counter-clockwise until it clicks.
4.2. Channel Selection
The R2 radio supports 64 channels. To select a channel:
- Rotate the Channel Selector knob (typically located next to the On/Off/Volume knob) to choose the desired channel.
- The radio may announce the channel number or display it if equipped with a screen.
4.3. Transmitting and Receiving
- To transmit, press and hold the Push-to-Talk (PTT) button located on the side of the radio. Speak clearly into the microphone.
- Release the PTT button to stop transmitting and return to receive mode.
- When receiving a transmission, the radio's speaker will output the audio.

Figure 2: The Push-to-Talk (PTT) button is designed for easy activation.
4.4. Key Features and Functions
The Motorola Solutions R2 incorporates several features to enhance communication:
- SINC+ Noise Suppression: Utilizes advanced algorithms to reduce background noise for clearer audio.
- Voice Announcement: Provides audible feedback for channel changes or feature activation.
- Programmable Buttons: The radio features two programmable buttons that can be customized for quick access to frequently used functions (e.g., priority scan, home channel reminder). Refer to your dealer for programming options.
- Extended Range Direct Mode: Allows for communication without a repeater, extending direct radio-to-radio range.
- Dual Capacity Direct Mode: Doubles the capacity of your 12.5 kHz channel without a repeater.
- Transmit Interrupt: Enables a high-priority user to interrupt another conversation for critical messages.
- Dual Priority Scan: Monitors two priority channels more frequently while scanning other channels.
- Keypad Lock: Prevents accidental button presses.

Figure 3: The R2 radio features SINC+ noise suppression for clear communication in noisy environments.

Figure 4: The R2 radio offers programmable buttons for a simplified user experience.
5. Maintenance
5.1. Cleaning the Radio
- Wipe the radio's exterior with a soft, damp cloth.
- Do not use harsh chemicals, solvents, or abrasive cleaners.
- Ensure the radio is powered off and the battery is removed before cleaning.
5.2. Battery Care
- Always use genuine Motorola Solutions batteries and chargers.
- Avoid exposing batteries to extreme temperatures.
- Do not short-circuit battery terminals.
- Dispose of old batteries according to local regulations.
5.3. General Care
- Protect the radio from dust, moisture, and extreme temperatures.
- The radio is rated IP55 for dust and water ingress protection, but it is not water resistant. Avoid submerging the radio in water.
- Avoid dropping the radio or subjecting it to severe impacts.

Figure 5: The R2 radio is designed to be sleek and tough, meeting Mil-Std-810 requirements and featuring an IP55 rating for dust and water ingress protection.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Radio does not power on. | Battery is depleted or not properly installed. | Charge the battery or ensure it is securely installed. |
| Cannot transmit or receive. | Incorrect channel selected, out of range, or antenna not attached. | Verify channel, move closer to other radios/repeater, check antenna connection. |
| Audio is unclear or distorted. | Volume too low/high, SINC+ noise suppression settings, or interference. | Adjust volume, check audio profile settings, move away from sources of interference. |
| Battery life is short. | Battery is old or not fully charged. | Replace battery if old, ensure full charge before use. |
If the problem persists after attempting these solutions, contact Motorola Solutions customer support or your authorized dealer.
7. Specifications
- Model: AAH11JDC9JA2N
- Brand: Motorola Solutions
- Frequency Range: 136 - 174 MHz (VHF)
- Number of Channels: 64
- Talking Range Maximum: 5 Miles (approximate, varies with terrain and conditions)
- Voltage: 7.2 Volts (DC)
- Item Weight: Approximately 3 pounds (with standard battery)
- Package Dimensions: 12 x 9 x 3 inches
- Water Resistance Level: Not Water Resistant (IP55 rated for dust and water ingress protection)
- Special Features: Keypad Lock, Portable, SINC+ Noise Suppression, Voice Announcement, Programmable Buttons, Extended Range Direct Mode, Dual Capacity Direct Mode, Transmit Interrupt, Dual Priority Scan, Home Channel Reminder.
- Environmental Standards: Meets Mil-Std-810 requirements.

Figure 6: Overview of key features including frequency bands, channel capacity, and ruggedness standards.
8. Warranty and Support
For warranty information, please refer to the warranty card included with your product or visit the official Motorola Solutions website. Technical support and service are available through authorized Motorola Solutions dealers.
Online Resources: For additional information, FAQs, and software updates, visit the Motorola Solutions official website.





