Olafus 5-LBA100M

Olafus 100W 10000LM LED Flood Light (Model 5-LBA100M) Instruction Manual

For Models: 5-LBA100M

1. Introduction

Thank you for choosing the Olafus 100W 10000LM LED Flood Light. This product is designed to provide powerful and efficient outdoor illumination for various applications such as backyards, garages, patios, and more. Featuring 5 adjustable heads and an IP65 waterproof rating, this flood light offers customizable lighting and reliable performance in diverse weather conditions. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of your device.

Olafus 100W 10000LM LED Flood Light with 5 adjustable heads and power cord

Figure 1.1: Olafus 100W 10000LM LED Flood Light

2. Safety Instructions

  • Electrical Safety: Ensure the power supply is disconnected before installation or maintenance. Use only with a compatible power outlet. Do not modify the plug or power cord.
  • Installation: Install the flood light on a stable surface capable of supporting its weight. Ensure all connections are secure.
  • Outdoor Use: This product is IP65 rated for outdoor use. However, avoid submerging it in water.
  • Heat: The LED light heads may become warm during operation. Do not touch them directly when the light is on.
  • Eye Protection: Do not stare directly into the light source when it is operating, as it can cause eye strain or damage.
  • Maintenance: Refer to the maintenance section for cleaning and care instructions. Do not attempt to repair the unit yourself. Contact qualified personnel for service.

3. Package Contents

Verify that all components are present and in good condition upon opening the package:

  • Olafus 100W 10000LM LED Flood Light (with integrated plug)
  • Machine Screws (x3)
  • Expansion Rubber Plugs (x3)
Diagram showing product dimensions and included accessories: flood light, 3 machine screws, 3 expansion rubber plugs

Figure 3.1: Package Contents and Product Dimensions

4. Product Features

  • High Brightness: Delivers 10000 lumens of 6500K daylight white light with 100W power consumption.
  • Energy Efficient: Designed for up to 80% energy savings compared to traditional lighting.
  • Adjustable Lighting: Features 5 independently adjustable light heads, allowing for a 360° beam angle and coverage up to 1977 sq ft.
  • Durable Construction: Built with die-cast aluminum material and an innovative heat dissipation design for a long lifespan of 30,000 hours.
  • Weatherproof: IP65 waterproof rating ensures reliable operation in rain, snow, and other outdoor conditions.
  • Easy Installation: Plug-in design with a unique base for quick and hassle-free setup without the need for a junction box.
Comparison of Olafus 5-head floodlight (10000lm, 360° beam, 1977 sq ft) versus a typical 3-head floodlight (5000lm, 270° beam, 1022 sq ft)

Figure 4.1: Enhanced Coverage and Brightness

Diagram illustrating the 360 degree broad beam angle with adjustable light heads, showing 90 and 335 degree rotation capabilities

Figure 4.2: Adjustable Beam Angle

Olafus flood light operating in rain, with icons for snow, rain, and wind, indicating IP65 waterproof rating

Figure 4.3: IP65 Waterproof Rating

Close-up view of the flood light's multiple cooling fins, with arrows indicating airflow for efficient heat dissipation

Figure 4.4: Efficient Heat Dissipation Design

5. Setup and Installation

The Olafus flood light is designed for straightforward plug-in installation. Follow these steps:

  1. Choose Location: Select a suitable outdoor location for mounting the flood light. Ensure there is a readily accessible power outlet within 4.92 feet (1.5m) of the mounting point.
  2. Mounting the Base (Step 1): Position the flood light's base against the desired mounting surface. Mark the positions for drilling. Drill pilot holes and insert the expansion rubber plugs if mounting into masonry or drywall. Secure the base using the provided machine screws.
  3. Connect Power (Step 2): Once the light is securely mounted, plug the power cord into a compatible outdoor electrical outlet. Ensure the outlet is protected from direct weather exposure or use an appropriate weatherproof cover.
  4. Adjust Light Heads: Loosen the adjustment screws on each light head, position them to achieve the desired illumination area, and then tighten the screws to secure them.
Installation steps showing mounting the flood light base to a wall and plugging the power cord into an outlet

Figure 5.1: Installation Steps

Olafus flood light installed on an exterior wall, with the power cord plugged into a weatherproof outdoor outlet

Figure 5.2: Mounted Flood Light with Plugged-in Power

6. Operation

The Olafus 100W LED Flood Light operates via a standard electrical switch. It does not feature a built-in motion sensor or dusk-to-dawn functionality.

  • Power On/Off: Use the wall switch connected to the electrical outlet to turn the flood light on or off.
  • Adjusting Light Heads: The five light heads can be manually adjusted to direct light precisely where needed. Gently loosen the pivot screws, adjust the angle of each head (up to 335° horizontally and 90° vertically), and then securely tighten the screws.
Image showing a hand operating a wall switch to control the flood light installed above a garage door at night. Text indicates 'Switch Control' and 'No motion sensor, not dusk to dawn'.

Figure 6.1: Switch Control Operation

7. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your flood light.

  • Cleaning: Periodically clean the light heads and housing with a soft, damp cloth to remove dust, dirt, and debris. Ensure the power is off before cleaning. Do not use abrasive cleaners or solvents.
  • Inspection: Regularly inspect the power cord for any signs of damage, fraying, or wear. Check mounting screws for tightness.
  • No User-Serviceable Parts: The LED components are integrated and not user-replaceable. Do not attempt to open the light heads or main housing.

8. Troubleshooting

If you encounter issues with your Olafus flood light, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Light does not turn onNo power to the outlet; Faulty outlet; Loose connection; Damaged unit.Check if the outlet has power (test with another device). Ensure the plug is fully inserted. Check circuit breaker. If problem persists, contact customer support.
Light flickersUnstable power supply; Loose wiring; Unit malfunction.Ensure stable power. Check for loose connections. If flickering continues, discontinue use and contact customer support.
Light output is dimDirt or debris on light heads; Power supply issue.Clean the light heads. Verify stable power supply.

9. Specifications

FeatureSpecification
Model Number5-LBA100M
Power100W
Brightness10000 Lumens
Color Temperature6500K (Daylight White)
Light Heads5 Adjustable Heads
Beam Angle360° (Adjustable)
Coverage AreaUp to 1977 sq ft
Waterproof RatingIP65
MaterialAluminum
Power SourceCorded Electric (Plug-in)
Voltage240 Volts
Product Dimensions16.39"L x 6.36"W x 5.6"H
Item Weight2.94 pounds
Lifespan30,000 hours

10. Warranty and Support

Olafus products are manufactured to high-quality standards. For warranty information, technical support, or any questions regarding your product, please refer to the warranty card included with your purchase or visit the official Olafus website. Please retain your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.