Kit Cat Klock LBC-55

Kit-Cat Klock Limited Edition Festival Orange

Instruction Manual

Model: LBC-55

Product Overview

The Kit-Cat Klock Limited Edition Festival Orange is a classic battery-operated wall clock featuring the iconic moving eyes and wagging tail. This timepiece is designed to add a touch of retro charm and whimsy to any indoor space.

Front view of the orange Kit-Cat Klock with moving eyes and tail.

Image: Front view of the Kit-Cat Klock in Festival Orange, showcasing its distinctive moving eyes and tail.

Setup

  1. Unpacking: Carefully remove the clock and its components from the packaging. Ensure all parts are present, including the clock body and the separate tail piece.
  2. Battery Installation:

    Locate the battery compartment on the back of the clock. Insert two (2) C batteries (not included) according to the polarity indicators (+/-). Ensure batteries are seated firmly for proper connection.

    Back view of the Kit-Cat Klock showing the battery compartment.

    Image: Rear view of the Kit-Cat Klock, highlighting the battery compartment for installation.

  3. Attach the Tail: Gently slide the tail piece into the slot at the bottom of the clock body until it is securely in place. The tail should swing freely.
  4. Set the Time: Use the small dial on the back of the clock's movement mechanism to set the correct time.
  5. Mounting: Hang the clock on a sturdy wall hook or screw. The clock is designed for wall mounting and should be placed on a flat, stable surface to allow the tail and eyes to move freely.

Operating Instructions

Once batteries are installed and the time is set, the Kit-Cat Klock will begin operating. The quartz movement ensures accurate timekeeping, while the signature eyes will roll from side to side and the tail will wag continuously, adding a lively touch to your space.

Maintenance

Troubleshooting

ProblemPossible CauseSolution
Clock not running or running slowly.Dead or low batteries; incorrect battery installation.Replace both C batteries with new ones, ensuring correct polarity.
Eyes or tail not moving.Loose battery connection; obstruction in mechanism; clock not level.
  • Check battery connection. Some users have found that placing a small piece of foil or a penny at the bottom of the battery compartment can improve contact if batteries are slightly loose.
  • Ensure the clock is hanging perfectly level on the wall.
  • Gently check for any obstructions around the eye or tail mechanism.
  • If the motor for the eyes/tail movement stops working while the clock still tells time, this may indicate a mechanical issue.
Clock makes unusual noises.Internal mechanism issue; clock not level.Ensure the clock is hanging level. If noises persist, contact customer support.

Specifications

Warranty and Support

For any questions, concerns, or support regarding your Kit-Cat Klock, please contact the manufacturer directly. While specific warranty details are not provided in this manual, the manufacturer, California Clock Company, is committed to quality products.

You can visit the official Kit-Cat Klock store on Amazon for more information and contact options: Kit-Cat Klock Amazon Store

Related Documents - LBC-55

Preview Arcegen NGS PreMix RNA Library Prep Kit (Strand-specific) - Instructions for Use
Comprehensive instructions for using the Arcegen NGS PreMix RNA Library Prep Kit (Strand-specific) (Cat.No. N210104) for Illumina and MGI platforms. Covers product description, specifications, components, storage, operation notes, adapter ligation, library amplification, purification, and quality control.
Preview Shasta™ Total RNA-Seq Kit - 2 Chip User Manual for ICELL8® cx Single-Cell System
User manual for the Shasta™ Total RNA-Seq Kit - 2 Chip, enabling high-throughput single-cell transcriptome analysis of up to 100,000 cells with the ICELL8® cx Single-Cell System. Details protocol steps, components, and best practices for RNA sequencing.
Preview Legrand Plexo³ IP65 Cabinets: Workshop Specifications and Technical Guide
Comprehensive technical specifications, product range details, installation instructions, and accessories for Legrand Plexo³ IP65 weatherproof cabinets. Ideal for residential, commercial, and industrial applications.
Preview Legrand Galaxy System Installation Manual and Guide
This installation manual provides detailed instructions for setting up and configuring Legrand Galaxy system components, including various server and station models, 4G routers, and accessories. It covers hardware installation, connections, LED indicators, and earthing procedures.
Preview Traceable® Bench Conductivity Meter with RS-232 Output: User Manual and Specifications
Comprehensive user manual and technical specifications for the Traceable® Bench Conductivity Meter, detailing its features, operation, calibration, troubleshooting, and accessories. Includes information on conductivity, TDS, resistivity, salinity, and concentration measurements.
Preview TRUPER 724658 IN-GEN-T-CAR-TX Wheelbarrow Assembly Instructions
Step-by-step assembly guide for the TRUPER 724658 IN-GEN-T-CAR-TX wheelbarrow, including parts list and required tools. Ensure proper assembly for safe and efficient use.