JBL Spinner BT Bluetooth Turntable Instruction Manual

1. Introduction

The JBL Spinner BT is a high-quality Bluetooth turntable designed to bring your vinyl collection to life with modern convenience. Featuring AptX-HD encoding, it offers a seamless wireless audio experience without compromising sound quality. This manual provides essential information for setting up, operating, and maintaining your turntable.

The turntable includes analog outputs for traditional Hi-Fi systems and a built-in phono pre-amp for active speakers. Its construction features an aluminum platter and tonearm, ensuring precise tracking and durability.

Image: The JBL Spinner BT turntable features a vibrant design with a prominent JBL logo on its side.

2. What's in the Box

Carefully unpack all components and ensure everything listed below is present:

• JBL Spinner BT Turntable Unit
• Drive Belt
• Aluminum Platter
• Felt Mat
• Headshell and Pre-installed Moving Magnet Cartridge
• Dust Cover and 2x Hinges
• Power Supply
• RCA Audio Cables

Image: All included components of the JBL Spinner BT turntable are shown, ready for assembly.

3. Setup

3.1. Unpacking and Placement

Remove the turntable from its packaging. Place the turntable on a stable, level surface away from direct sunlight, heat sources, and strong vibrations. Ensure adequate ventilation around the unit.

3.2. Platter and Belt Installation

1. Carefully place the aluminum platter onto the center spindle of the turntable.
2. Locate the drive belt. Gently stretch the belt around the inner rim of the platter and hook it onto the motor pulley.
3. Place the felt mat on top of the platter.

3.3. Headshell and Cartridge Installation

The moving magnet cartridge is pre-installed on the headshell. To attach the headshell to the tonearm:

1. Hold the headshell firmly.
2. Insert the headshell into the front end of the tonearm.
3. Rotate the locking nut on the tonearm clockwise until the headshell is securely fastened.

Image: The removable headshell allows for easy replacement or upgrade of the cartridge.

3.4. Counterweight and Tracking Force Adjustment

The counterweight balances the tonearm and sets the tracking force. Refer to your cartridge's specifications for the recommended tracking force (typically 1.5g to 2.5g for moving magnet cartridges).

1. Gently slide the counterweight onto the rear of the tonearm.
2. Unlock the tonearm from its rest.
3. Adjust the counterweight by rotating it until the tonearm floats horizontally and is balanced.
4. Once balanced, hold the counterweight steady and rotate the numbered ring to '0'.
5. Rotate the entire counterweight (including the numbered ring) counter-clockwise to the recommended tracking force for your cartridge.

3.5. Anti-Skating Adjustment

Anti-skating compensates for the inward force on the stylus as the record spins. Set the anti-skating dial to the same value as your tracking force.

3.6. Dust Cover Installation

Attach the two hinges to the dust cover. Then, align the hinges with the slots on the rear of the turntable and insert them to secure the dust cover.

Image: An overview of the JBL Spinner BT turntable with labeled components for easy identification.

3.7. Connecting to Audio Systems

The JBL Spinner BT offers both wired and wireless connectivity options.

• Wired Connection: Use the provided RCA cables to connect the turntable's AUDIO OUTPUT (R/L) to your amplifier or active speakers. Ensure the PHONO/LINE switch on the rear panel is set correctly (PHONO for phono input on amplifier, LINE for line input or active speakers).
• Bluetooth Connection: The turntable features Bluetooth with AptX-HD encoding for high-quality wireless audio.

Image: The rear panel connections of the JBL Spinner BT, including RCA outputs, pre-amp switch, and Bluetooth pairing button.

4. Operating Instructions

4.1. Playing a Record

1. Place a record on the felt mat on the platter.
2. Select the correct speed (33⅓ or 45 RPM) using the selector switch on the turntable.
3. Unlock the tonearm from its rest.
4. Gently lift the tonearm using the cueing lever.
5. Position the tonearm over the desired track on the record.
6. Slowly lower the cueing lever to gently place the stylus onto the record.
7. At the end of the record, the turntable features an auto-stop function that will stop the platter rotation. Manually lift the tonearm and return it to its rest.

Image: The JBL Spinner BT turntable in operation, playing a vinyl record.

4.2. Bluetooth Pairing

1. Ensure your Bluetooth speaker or headphones are in pairing mode.
2. Press the Bluetooth pairing button on the rear panel of the JBL Spinner BT. The indicator light will flash.
3. Once successfully paired, the indicator light will remain solid.

Image: Enjoy your vinyl wirelessly by pairing the JBL Spinner BT with Bluetooth headphones or speakers.

4.3. Speed Selection

Use the 33⅓ / 45 RPM selector switch located on the top left of the turntable to match the playback speed to your vinyl record.

5. Maintenance

5.1. Cleaning the Turntable

• Wipe the turntable chassis with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
• Keep the platter and felt mat free of dust and debris.

5.2. Stylus Care

• Regularly clean the stylus using a soft brush designed for stylus cleaning, brushing gently from back to front.
• Replace the stylus when it shows signs of wear (typically after 500-1000 hours of playback) to prevent damage to your records.

5.3. Dust Cover Care

• Clean the dust cover with a soft, damp cloth. Do not use alcohol-based cleaners as they may damage the acrylic.
• Avoid placing heavy objects on the dust cover.

6. Troubleshooting

• No Sound: Check all cable connections. Ensure the PHONO/LINE switch is set correctly. Verify your amplifier/speakers are powered on and selected to the correct input. For Bluetooth, ensure successful pairing.
• Distorted Sound: Check tracking force and anti-skating settings. Ensure the stylus is clean and not worn. Verify the record is clean and free of dust.
• Skipping: Re-check tracking force and anti-skating. Ensure the turntable is on a level and stable surface. Inspect the record for scratches or debris.
• Platter Not Spinning: Ensure the power supply is connected and the power switch is on. Check if the drive belt is correctly installed on the platter and motor pulley.

7. Specifications

• Product Dimensions: 17.13 x 14.49 x 6.1 inches
• Item Weight: 11.66 pounds (5.3 Kilograms)
• Model Number: JBLSPINNERBTBLKAM
• Brand: JBL
• Maximum Rotational Speed: 33.3 RPM (supports 33⅓ and 45 RPM)
• Material: Plastic (Plinth), Aluminum (Platter, Tonearm)
• Special Feature: Dust Cover, Bluetooth with AptX-HD, Built-in Phono Pre-amp, Auto-stop
• Compatible Devices: Speakers (wired or Bluetooth)
• Manufacturer: JBL
• Date First Available: November 14, 2023

8. Product Video

9. Warranty and Support

For warranty information and technical support, please refer to the official JBL website or contact their customer service. Keep your proof of purchase for any warranty claims.