Coleman WeatherMaster
Coleman WeatherMaster 10-Person Camping Tent and Cot Combo Instruction Manual
Introduction
This manual provides detailed instructions for the proper setup, operation, maintenance, and troubleshooting of your Coleman WeatherMaster 10-Person Camping Tent and Coleman Camping Cot, Air Mattress, & Pump Combo. Please read all instructions carefully before using the product to ensure safe and enjoyable use.
Image: The Coleman WeatherMaster 10-Person Camping Tent and the Coleman Camping Cot with Air Mattress.
Safety Information
- Fire Safety: Keep all flame and heat sources away from the tent fabric. The tent fabric is not fireproof.
- Ventilation: Ensure adequate ventilation inside the tent, especially when using heating or cooking appliances. Carbon monoxide can be deadly.
- Weather Conditions: Do not set up the tent under trees with dead branches. Avoid using the tent in severe weather conditions such as high winds, heavy snow, or lightning storms.
- Site Selection: Choose a level campsite free of sharp objects. Avoid setting up in depressions where water might collect.
- Cot Weight Limit: Do not exceed the specified weight limit for the camping cot. Refer to the product specifications for details.
- Air Mattress Care: Avoid placing sharp objects on the air mattress. Do not overinflate the air mattress.
Package Contents
Verify that all components are present before beginning setup:
- Coleman WeatherMaster 10-Person Tent Fabric
- Tent Poles (3)
- Rainfly
- Room Divider
- Tent Stakes and Guylines
- Tent Carry Bag
- Coleman Camping Cot
- Air Mattress
- Battery-Operated Air Pump
- Cot Carry Bag
Setup Instructions
1. Coleman WeatherMaster 10-Person Tent Setup
The tent is designed for easy setup, typically taking around 20 minutes.
- Unpack and Layout: Remove the tent from its carry bag and spread it out on a clean, level surface. Ensure the floor is flat.
- Assemble Poles: Connect the shock-corded tent poles.
- Insert Poles: Slide the assembled poles through the continuous pole sleeves on the tent fabric. The patented pin-and-ring system helps secure the poles at the base.
- Raise Tent: Lift the tent structure and attach the Insta-Clip suspension clips to the poles.
- Attach Rainfly: Drape the rainfly over the tent, aligning the doors and windows. Secure the rainfly with the attached buckles or straps.
- Stake Down: Secure the tent corners and guylines with stakes to withstand winds up to 35 MPH.
Image: Exterior view of the Coleman WeatherMaster 10-Person Tent with rainfly installed.
Image: Close-up of the tent's rainfly and pole attachment points.
2. Coleman Camping Cot & Air Mattress Setup
- Unfold Cot: Remove the cot from its carry bag and unfold it completely until it locks into place.
- Position Air Mattress: Place the air mattress on top of the unfolded cot.
- Inflate Air Mattress: Use the included battery-operated pump to inflate the air mattress. Locate the air valve on the mattress, attach the pump nozzle, and turn on the pump. Inflate until the mattress is firm but not overinflated.
- Secure Mattress (if applicable): Some models may have straps or a zippered cover to secure the air mattress to the cot. Ensure it is properly aligned and secured.
- Extend Side Tables: Pull out the integrated side tables with cup holders if desired.
Image: The Coleman Camping Cot with the air mattress fully inflated and placed on top.
Image: Close-up view of the air mattress zipper, showing how it integrates with the cot cover.
Operating Instructions
1. Tent Usage
- Entry/Exit: Use the hinged front door for convenient entry and exit.
- Ventilation: Utilize the angled windows and mesh ceiling for airflow. Keep windows partially open to reduce condensation.
- Privacy: Deploy the room divider for increased privacy within the tent.
- Storage: Use the integrated storage pockets to keep small items organized and off the floor.
2. Cot & Air Mattress Usage
- Comfort: The advanced coil construction of the air mattress provides firm support for a comfortable sleep.
- Convenience: Use the pull-out side tables and cup holders for easy access to personal items like flashlights or beverages.
- Leak-Proof System: The air mattress is designed to stay inflated throughout the night. If minor deflation occurs due to temperature changes, a small amount of air can be added.
Image: The Coleman Camping Cot with the air mattress and one side table extended, showing the cup holder.
Maintenance
1. Tent Maintenance
- Cleaning: Clean the tent fabric by hand washing with mild soap and water. Do not use harsh detergents or put in a washing machine.
- Drying: Always ensure the tent is completely dry before packing it away to prevent mildew and odors. Air dry in a shaded area.
- Storage: Store the tent in its carry bag in a cool, dry place, away from direct sunlight and extreme temperatures.
- Seam Sealing: Periodically check and re-seal tent seams if necessary to maintain water resistance.
2. Cot & Air Mattress Maintenance
- Cleaning: Wipe the cot frame and air mattress with a damp cloth and mild soap. Ensure the air mattress is dry before deflating and storing.
- Deflation: To deflate the air mattress, open the air valve and allow air to escape. You can gently roll the mattress to expel remaining air.
- Storage: Fold the cot and air mattress neatly and store them in their respective carry bags in a cool, dry place.
- Pump Care: Remove batteries from the pump during long periods of storage to prevent corrosion.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Tent leaking | Improper rainfly setup; worn seam seals; fabric damage. | Ensure rainfly is correctly positioned and secured. Re-seal seams with a seam sealer. Inspect for tears and repair with a tent repair kit. |
| Air mattress deflating | Valve not fully closed; small puncture; temperature drop. | Ensure valve is tightly closed. Check for punctures and repair with a patch kit. Add a small amount of air if deflation is due to cold temperatures. |
| Tent poles difficult to assemble/disassemble | Dirt in ferrules; bent sections. | Clean ferrules. Gently straighten minor bends or replace damaged pole sections. |
| Battery pump not working | Dead batteries; clogged intake/output. | Replace batteries. Check and clear any obstructions from the pump's intake or output ports. |
Specifications
| Feature | Detail |
|---|---|
| Tent Occupancy | 10 Person |
| Tent Dimensions (L x W x H) | 204"L x 108"W x 72"H (17 ft x 9 ft x 6 ft 8 in) |
| Tent Floor Area | 153 square feet |
| Tent Material | Polyguard Fabric (Tent), Polyethylene (Floor), Polyurethane/Nylon (Rainfly) |
| Water Resistance | WeatherTec System (1500 mm water resistance) |
| Wind Resistance | Tested to withstand 35+ MPH winds |
| Tent Setup Time | Approx. 20 minutes |
| Cot Type | Folding Camp Cot with Side Tables |
| Air Mattress Type | Queen Size, Advanced Coil Construction, Leak-Proof System |
| Pump Type | Battery-Operated Air Pump |
Warranty Information
Coleman products are manufactured to high-quality standards and are backed by a limited warranty. For specific warranty details, including duration and coverage, please refer to the warranty card included with your product or visit the official Coleman website. Keep your proof of purchase for warranty claims.
Customer Support
If you have any questions, require assistance with setup, or need to troubleshoot an issue not covered in this manual, please contact Coleman Customer Service:
- Website: www.coleman.com
- Phone: Refer to the Coleman website for regional contact numbers.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.