FEZEN Cold Press Juicer Instruction Manual

Important Safety Instructions

When using electrical appliances, basic safety precautions should always be followed, including the following:

• Read all instructions before using the juicer.
• To protect against risk of electrical shock, do not immerse the motor base in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use, before assembling or disassembling parts, and before cleaning.
• Avoid contact with moving parts.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
• The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter or touch hot surfaces.
• Always ensure the juicer cover is properly and securely locked in place before the motor is switched on.
• Do not put fingers or other objects into the juicer opening while it is in operation. If food becomes lodged in the opening, use the food pusher provided.
• Do not use the appliance for other than intended use.
• This appliance is for household use only.

Figure 1: The Fezen juicer is designed for safe and easy use, even for families.

Product Overview

The FEZEN Cold Press Juicer is designed to efficiently extract juice from fruits and vegetables while retaining maximum nutrients.

Key Features:

• High Juice Yield: Utilizes 7-upgrade spiral masticating technology (80 RPM) to fully squeeze fruits and vegetables, achieving up to 95% juice yield.
• Pure Taste & Nutrient Retention: Minimizes oxygen and heat exposure, effectively retaining nutrients, color, and aroma. Produces less foam compared to traditional juicers.
• Two-Speed Regulation & Reverse Function: Features adjustable working speeds (Soft/Hard) for various types of produce and a reverse function to prevent clogging.
• Low Noise Operation: Operates at a quiet 57 dB, allowing for a more pleasant juicing experience.
• Easy to Clean & Disassemble: Designed for quick one-button disassembly and features dishwasher-safe parts for convenient cleaning.
• Safe Design: 100% BPA-free construction with no sharp blades, making it safe for household use.
• Compact & Portable: Its design allows for easy placement on small counter spaces.

Components:

Familiarize yourself with the parts of your FEZEN Cold Press Juicer:

• Motor Base
• Feeding Chute / Hopper
• Auger (Spiral Masticating Screw)
• Filter Screen
• Juice Outlet
• Pulp Outlet
• Juice Cup
• Pulp Container
• Food Pusher
• Cleaning Brush

Figure 2: The FEZEN Cold Press Juicer with its components and fresh produce.

Figure 3: The juicer's compact design fits well in modern kitchens.

Figure 4: Detailed view of the 7-upgrade spiral masticating technology for high juice yield.

Figure 5: The Fezen juicer produces drier pulp and retains more nutrients.

Figure 6: The Fezen juicer operates quietly, enhancing the user experience.

Setup and Assembly

Before first use, wash all removable parts in warm soapy water, rinse thoroughly, and dry. Ensure the motor base is unplugged from the power outlet.

1. Place the motor base on a stable, flat, and dry surface.
2. Insert the filter screen into the juice bowl, ensuring it is seated correctly.
3. Insert the auger (spiral masticating screw) into the center of the filter screen, twisting slightly until it drops into place.
4. Attach the feeding chute assembly onto the juice bowl, aligning the marks and twisting to lock it securely. You should hear a click when it's locked.
5. Place the juice cup under the juice outlet and the pulp container under the pulp outlet.

Figure 7: Quick installation guide for the juicer components.

Operating Instructions

Follow these steps for optimal juicing results:

1. Prepare Ingredients: Wash all fruits and vegetables thoroughly. Cut ingredients into smaller pieces (approximately 1-2 inches) to fit the feeding chute and prevent clogging. Remove hard pits from fruits (e.g., peaches, cherries) and tough skins (e.g., pineapple, melon).
2. Select Speed Setting: Plug in the juicer. Turn the control knob to select the appropriate speed:
   • "Soft" (Low Speed): Ideal for softer fruits and vegetables like oranges, grapes, watermelon, tomatoes, and leafy greens.
   • "Hard" (High Speed): Suitable for harder ingredients such as carrots, apples, celery, ginger, and beets.
3. Start Juicing: Slowly feed the prepared ingredients into the feeding chute. Use the food pusher only when necessary to gently guide ingredients down. Do not force ingredients.
4. Reverse Function: If ingredients get jammed or the juicer stops, turn the knob to the "Rev" (Reverse) position for a few seconds to clear the blockage. Then, switch back to "0" (Off) before selecting a speed again.
5. Finish Juicing: Once all ingredients are juiced, turn the control knob to "0" (Off) and unplug the appliance.

Tips for Best Results:

• For leafy greens, roll them into a tight ball before feeding.
• Alternate between soft and hard ingredients to help push pulp through.
• Do not continuously operate the juicer for more than 20 minutes. Allow it to cool down for at least 10 minutes before resuming.

Figure 8: Control knob for speed selection and reverse function.

Figure 9: Features like the small feeder chute and reverse function enhance usability.

Cleaning and Maintenance

Regular cleaning ensures the longevity and optimal performance of your juicer. Always unplug the juicer before cleaning.

1. Disassembly: Press the release button on the side of the feeding chute assembly and twist to unlock and remove it. Then, remove the auger and filter screen from the juice bowl.
2. Rinse Immediately: Rinse all removable parts (feeding chute, auger, filter screen, juice bowl, juice cup, pulp container) under running water immediately after use to prevent pulp from drying and sticking.
3. Deep Cleaning: Use the provided cleaning brush to scrub the filter screen thoroughly, as small fibers can get lodged in the mesh. Wash all removable parts with warm, soapy water.
4. Dishwasher Safe: All removable parts are dishwasher safe (top rack recommended).
5. Motor Base: Wipe the motor base with a damp cloth. Never immerse the motor base in water or any other liquid.
6. Drying and Storage: Ensure all parts are completely dry before reassembling or storing. Store the juicer in a clean, dry place.

Figure 10: The juicer is designed for easy disassembly and cleaning, with dishwasher-safe parts.

Troubleshooting

If you encounter issues with your FEZEN Cold Press Juicer, refer to the following common problems and solutions:

Specifications

Warranty and Support

For warranty information and customer support, please refer to the product packaging or contact Fezen customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

For further assistance, visit the official Fezen website or contact their support team through the contact information provided with your product.