Disney 79616

Disney Wish Star Squishy Light (Model 79616)

Instruction Manual

Introduction

The Disney Wish Star Squishy Light is a soft, squeezable LED night light designed to provide adjustable illumination. This product can be powered via a USB-C cable or AAA batteries, offering versatility for various uses. This manual provides essential information for the safe and effective use of your new light.

Video: Overview of the Disney Wish Star Squishy Light, demonstrating its soft texture and light features.

Safety Information

  • This product is designed for indoor use only.
  • Keep the light away from water and excessive moisture.
  • Do not attempt to disassemble or modify the light.
  • Use only specified power sources (3 AAA batteries or 5V, 1A USB-A adapter).
  • Dispose of batteries properly according to local regulations.
  • Ensure the battery compartment is securely closed to prevent access by children.
  • The light is cool to the touch, but avoid prolonged direct contact with the LED source.

Package Contents

  • 1 x Disney Wish Star Squishy Light
  • 1 x USB-C Cable

Note: 3 AAA batteries and a 5V, 1A USB-A power adapter are not included.

Setup

Powering the Device

Your Disney Wish Star Squishy Light can be powered in two ways: via USB-C cable or with AAA batteries.

  1. Battery Installation (3 x AAA, not included):
    To install batteries, locate the battery compartment on the base of the light. Use a small screwdriver to remove the screw securing the battery cover. Insert three (3) AAA batteries, ensuring correct polarity (+/-). Replace the battery cover and secure it with the screw.
  2. USB-C Power Connection:
    Insert the USB-C end of the included cable into the port on the back of the light. Plug the USB-A end of the cable into a 5V, 1A USB-A power adapter (not included) or a compatible USB port.
Image showing the USB-C cable and three AAA batteries, illustrating the two power options for the light.

Image: The two power options for the light: USB-C cable and 3 AAA batteries.

Video: Step-by-step guide on setting up the Disney Wish Star Squishy Light, including battery installation and USB connection.

Operation

  1. Power On/Off:
    Locate the ON/OFF button on the base of the light. Press the button once to turn the light ON. Press and hold the button to turn the light OFF.
  2. Adjusting Brightness:
    Once the light is ON, gently tap or squeeze the soft silicone body of the Star Squishy Light to cycle through three levels of white light (high, medium, low).
Image showing a hand tapping the Disney Wish Star Squishy Light to change its brightness levels.

Image: Demonstrating how to tap the light to adjust brightness.

Automatic Shut-Off (Battery Mode Only): When powered by batteries, the light will automatically turn off after 60 minutes to conserve battery life.

Maintenance

  • To clean the light, gently wipe the silicone surface with a soft, damp cloth.
  • Do not use abrasive cleaners or immerse the light in water.
  • Ensure the light is completely dry before reconnecting to power.

Troubleshooting

ProblemPossible CauseSolution
Light does not turn on.No power, dead batteries, or loose connection.Check battery installation and replace if necessary. Ensure USB-C cable is securely connected to a working power source.
Brightness does not change.Insufficient tap/squeeze force or sensor issue.Ensure you are gently tapping or squeezing the light's body. If the issue persists, try turning the light off and on again.
Light turns off automatically.Operating on battery power.This is a normal feature when using batteries (60-minute auto-off). For continuous operation, use USB-C power.

Specifications

  • Model Number: 79616
  • Dimensions: 5.5"D x 5.6"W x 6.1"H
  • Material: Soft Silicone Rubber
  • Light Source: LED
  • Power Source: 3 x AAA Batteries (not included) or USB-C (5V, 1A USB-A adapter required, not included)
  • Control Method: Touch/Squeeze
  • Features: Dimmable (3 levels of white light), 60-minute auto-off (battery mode)
  • Manufacturer: Jasco Products Company, LLC
Image showing the dimensions of the Disney Wish Star Squishy Light: 6.5 inches wide, 6 inches high, and 5 inches deep.

Image: Product dimensions of the Star Squishy Light.

Warranty and Support

This Disney Wish Star Squishy Light is covered by a 90-day manufacturer's warranty. For warranty claims or technical support, please contact Jasco Products Company, LLC directly. Refer to the product packaging or manufacturer's website for contact information.

© 2026 Disney. All rights reserved. Manufactured by Jasco Products Company, LLC.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.