Introduction
Thank you for choosing the COSTWAY Over-Toilet Storage Cabinet. This manual provides essential information for the safe assembly, operation, and maintenance of your new bathroom organizer. Please read these instructions carefully before beginning assembly and retain them for future reference.
Safety Information
- Important: Before purchasing or assembling, please measure the height and width of your toilet to ensure proper fit. The cabinet dimensions are 18 x 88 x 100 cm (Depth x Width x Height).
- Always assemble the product on a soft, clean surface to prevent scratches.
- Ensure all parts are securely fastened before use.
- Do not overload shelves. Refer to the specifications for maximum weight capacity.
- Install the anti-tip device as instructed to prevent accidental tipping, especially in households with children or pets.
Package Contents
Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer service.
- Side Panels (Left and Right)
- Top Shelf Panel
- Middle Shelf Panels (Adjustable)
- Bottom Support Bar
- Back Panels
- Cabinet Door
- Hinges and Door Handle
- Assembly Hardware (Screws, dowels, cam locks, etc.)
- Anti-Tip Device Kit
- Screw Hole Covers
Image: Example of various panels and hardware included in the package.
Setup and Assembly
Follow these steps for assembling your COSTWAY Over-Toilet Storage Cabinet. It is recommended to have two people for assembly.
- Prepare the Area: Clear a spacious, clean, and soft area for assembly to prevent damage to the parts.
- Identify Parts: Lay out all components and hardware. Refer to the parts list to identify each piece.
- Assemble Side Frames: Attach the horizontal support bars and the bottom reinforced bar to the side panels using the provided hardware. The bottom bar has 3 adjustable heights (13.5cm, 17cm, 20cm) to accommodate different toilet sizes.
- Install Shelves: Insert the adjustable shelves into the desired slots within the open compartments. There are 10 height options for customization.
- Attach Top Panel: Secure the top shelf panel to the assembled frame. Ensure the raised anti-drop edge is facing upwards.
- Assemble Cabinet Door: Attach the soft-close hinges to the cabinet door and then to the side panel. Install the round handle.
- Secure Back Panels: Fasten the back panels to the rear of the cabinet for added stability.
- Install Anti-Tip Device: Securely attach the anti-tip device to the top rear of the cabinet and to a wall stud using the provided hardware. This is a critical safety step.
Image: Illustration of adjustable shelves and the reinforced lower bar with multiple height settings.
Image: Diagram showing the correct installation of the anti-tip device to prevent wobbling or overturning.
Operating Instructions
This over-toilet storage cabinet is designed to maximize vertical space in your bathroom or laundry room.
- Storage Capacity: Utilize the top shelf with its raised edge to prevent items from falling. The two open compartments are ideal for frequently used items like toilet paper or towels. The single-door cabinet provides concealed storage for personal items or cleaning supplies.
- Adjustable Shelves: Customize the height of the interior shelves within the cabinet to fit items of various sizes. Simply remove the shelf and reposition the support pins to a different height.
- Soft-Close Door: The cabinet door features soft-close hinges for quiet and gentle closing, preventing slamming.
Image: The cabinet positioned over a toilet, showcasing its large storage capacity for towels, shampoos, and decorative items.
Image: Detailed view of the cabinet's features, including the practical round handle, soft-close hinges, and screw hole covers for a neat finish.
Maintenance
- Cleaning: Wipe the cabinet surfaces with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as they may damage the finish.
- Spills: Promptly clean up any spills to prevent water damage or staining.
- Hardware Check: Periodically check all screws and fasteners to ensure they remain tight. Retighten if necessary.
- Anti-Tip Device: Regularly inspect the anti-tip device to ensure it is still securely attached to both the cabinet and the wall.
Troubleshooting
- Cabinet wobbles after assembly:
- Ensure all screws are tightened. Verify that the anti-tip device is correctly installed and secured to a wall stud. Uneven flooring can also cause wobbling; consider using furniture pads to level the unit.
- Difficulty fitting the cabinet over the toilet:
- Recheck your toilet's dimensions against the cabinet's internal clearance (18 x 68.5 x 79 cm). Ensure the bottom reinforced bar is set to the appropriate height (13.5cm, 17cm, or 20cm) to clear the toilet tank. If the toilet is unusually shaped or sized, the cabinet may not be compatible.
- Cabinet door does not close smoothly:
- Check the hinge alignment. Adjust the screws on the hinges if necessary to ensure proper door closure. Ensure no items inside the cabinet are obstructing the door.
Specifications
| Brand | COSTWAY |
| Model Number | BA7881FR |
| Color | White |
| Material | Wood (MDF, Engineered Wood) |
| Product Dimensions (L x W x H) | 18 x 88 x 100 cm |
| Internal Clearance (L x W x H) | 18 x 68.5 x 79 cm |
| Adjustable Lower Bar Height | 13.5 / 17 / 20 cm (3 levels) |
| Maximum Weight Capacity | 45 kg (Total) |
| Item Weight | 13.5 kg |
| Special Feature | Adjustable Shelves, Anti-Tip Device |
| Mounting Type | Floor Mount |
Image: Detailed product dimensions including overall size and internal clearances.
Warranty and Support
Information regarding product warranty and customer support was not available in the provided data. Please refer to your purchase documentation or contact the retailer for details on warranty coverage and support options.
Additional Product Views
