Peiyuu Q20 Rechargeable Fabric Shaver Instruction Manual

1. Introduction

The Peiyuu Q20 Rechargeable Fabric Shaver is designed to efficiently remove fuzz, pills, and lint from various fabrics. Its compact and portable design makes it suitable for both home use and travel, helping to restore the pristine appearance of your garments and upholstery.

This manual provides essential information for the safe and effective operation, maintenance, and care of your fabric shaver.

2. Safety Instructions

• Keep the device out of reach of children.
• Do not use the device on wet fabrics. Ensure fabrics are dry before use.
• Avoid pressing the shaver too hard against the fabric to prevent damage to the material or blades.
• Do not touch the blades directly when the device is open or in operation. The device features a safety lock that prevents operation when the blade cover is removed.
• Unplug the device before cleaning or when not in use.
• Store the device in a cool, dry place.

3. Package Contents

Verify that all items are present in the package:

• Fabric Shaver x 1
• Cleaning Brush x 1
• Type-C Charging Cable x 1
• User Manual x 1
• Replacement Blades x 2 (typically included, refer to packaging)

Image: Contents of the Peiyuu Q20 Fabric Shaver package.

4. Product Overview

The Peiyuu Q20 Fabric Shaver features a sleek design with intuitive controls and efficient pilling removal capabilities.

• Digital LED Display: Shows battery level and speed settings.
• 3 Speed Settings: Adjustable for different fabric types and pilling levels.
• 6-Leaf Stainless Steel Blades: Designed for effective and quick removal of lint and pills.
• Bionic Honeycomb Mesh: Protects fabrics while allowing pills to be captured.
• Rechargeable Battery: Built-in 2600mAh Lithium Polymer battery, charged via Type-C port.
• Security Lock: Automatically deactivates the device if the blade cover is loose or removed, ensuring safety.
• Detachable Lint Container: Transparent and easy to remove for emptying.

Image: Front and back view of the Peiyuu Q20 Fabric Shaver, highlighting the digital display and included replacement blades.

Image: Detailed view of the shaver's internal components, including the 6-leaf blade, security lock mechanism, and honeycomb mesh.

5. Setup

5.1 Charging the Device

Before first use, fully charge the fabric shaver. Connect the provided Type-C charging cable to the charging port on the device and to a suitable USB power source. The digital LED display will indicate the charging status and battery percentage. A full charge typically takes approximately 2 hours.

Image: Visual guide for charging the device via its Type-C port, indicating battery capacity and charging duration.

5.2 Blade Installation/Replacement

The device comes with pre-installed blades. If replacement is needed:

1. Ensure the device is turned off and unplugged.
2. Gently twist and remove the outer blade cover.
3. Carefully remove the old blade unit.
4. Place a new blade unit onto the spindle, ensuring it sits securely.
5. Reattach the outer blade cover by twisting it clockwise until it clicks into place. The safety lock prevents operation if the cover is not properly secured.

6. Operating Instructions

6.1 Power On/Off and Speed Adjustment

Press the power button to turn the device on. The digital LED display will light up, showing the current battery percentage and speed setting. Press the power button repeatedly to cycle through the 3 available speed settings (Low, Middle, High) to suit different fabric types. Press and hold the power button to turn the device off.

Image: The digital LED display indicating the three-speed adjustment options.

6.2 Using the Fabric Shaver

Lay the garment or fabric flat on a hard, smooth surface. Gently glide the shaver over the pilled areas. For delicate fabrics, use a lower speed setting and apply minimal pressure. For tougher pills or thicker fabrics, a higher speed may be more effective.

• Suitable for various fabrics including socks, sweaters, coats, bedding sets, and cloth furniture.
• Avoid using on very thin or loosely woven fabrics that may snag easily.

Image: Demonstrates the shaver's use on different fabric types and the corresponding speed settings.

Image: A visual comparison of a fabric before and after using the shaver, illustrating its effectiveness.

6.3 Demonstration Videos

7. Maintenance

7.1 Cleaning the Lint Container

For optimal performance, empty the lint container regularly, especially after each significant use.

1. Ensure the device is turned off.
2. Gently pull the lint container downwards to detach it from the main body.
3. Discard the collected lint.
4. Reattach the lint container by sliding it back into place until it clicks securely.

Image: Instructions on how to detach and clean the lint collection container.

7.2 Cleaning the Blades

Use the provided cleaning brush to remove any lint or debris from around the blades and the mesh cover.

1. Ensure the device is turned off and unplugged.
2. Remove the outer blade cover (as described in Section 5.2).
3. Use the small brush to carefully sweep away any trapped lint from the blades and the inner mesh.
4. Reattach the blade cover securely.

8. Troubleshooting

• Device not turning on: Ensure the device is charged. Check if the blade cover is securely attached (safety lock feature).
• Not removing lint effectively: The lint container may be full and needs emptying. The blades might be dull and require replacement. Ensure the fabric is laid flat and taut.
• Battery not charging: Check the Type-C cable and power adapter. Ensure connections are secure.

9. Specifications

Image: Dimensions of the Peiyuu Q20 Fabric Shaver.

10. Warranty and Support

For warranty information or product support, please refer to the contact details provided on the product packaging or visit the official Peiyuu website. Keep your purchase receipt as proof of purchase.