SHARP AQUOS Sound Partner Bluetooth Neck Speaker AN-SX8 User Manual

1. Introduction

This manual provides essential instructions for the safe and effective use of your SHARP AQUOS Sound Partner Bluetooth Neck Speaker AN-SX8. Please read this manual thoroughly before using the product and retain it for future reference. This device is designed to deliver a personal audio experience while allowing you to remain aware of your surroundings.

2. Product Overview

The SHARP AQUOS Sound Partner AN-SX8 is a wireless neck speaker designed for comfortable, immersive audio. It features Bluetooth connectivity for wireless audio streaming and an AUX input for wired connections. Its lightweight design allows for extended wear.

Figure 1: SHARP AQUOS Sound Partner AN-SX8 Neck Speaker. This image displays the black, U-shaped neck speaker with control buttons visible on the top surface of the speaker units.

3. Setup

3.1 Charging the Device

Before initial use, fully charge the AN-SX8. Connect the provided USB charging cable to the charging port on the device and to a USB power adapter (not included) or a computer's USB port. The charging indicator light will illuminate during charging and turn off or change color when charging is complete.

3.2 Powering On/Off

• To power on: Press and hold the Power button for approximately 3 seconds until the indicator light flashes.
• To power off: Press and hold the Power button for approximately 3 seconds until the indicator light turns off.

3.3 Initial Bluetooth Pairing

1. Ensure the AN-SX8 is powered off.
2. Press and hold the Power button for approximately 5-7 seconds until the indicator light flashes rapidly, indicating pairing mode.
3. On your Bluetooth-enabled device (smartphone, tablet, TV), go to the Bluetooth settings and search for available devices.
4. Select "AN-SX8" from the list of found devices.
5. Once connected, the indicator light on the AN-SX8 will stop flashing rapidly and may glow steadily or flash slowly.

4. Operating Instructions

4.1 Bluetooth Connection

After initial pairing, the AN-SX8 will automatically attempt to connect to the last paired device when powered on. If it does not connect automatically, manually select "AN-SX8" from your device's Bluetooth settings.

4.2 AUX Connection

To use a wired connection, connect one end of a 3.5mm audio cable (not included) to the AUX input port on the AN-SX8 and the other end to the audio output jack of your device. The device will automatically switch to AUX mode when a cable is detected.

4.3 Volume Control

• Press the Volume Up (+) button to increase the volume.
• Press the Volume Down (-) button to decrease the volume.

4.4 Playback Control (Bluetooth Mode)

• Press the Play/Pause button once to play or pause audio.
• Double-press the Play/Pause button to skip to the next track.
• Triple-press the Play/Pause button to go to the previous track.

4.5 Call Handling (Bluetooth Mode)

• Press the Play/Pause button once to answer an incoming call.
• Press the Play/Pause button once during a call to end it.
• Press and hold the Play/Pause button for 2 seconds to reject an incoming call.

5. Maintenance

5.1 Cleaning

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners, alcohol, or chemical solvents, as these may damage the surface. Avoid getting moisture into any openings.

5.2 Storage

When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures. Fully charge the battery before storing and recharge it every few months to maintain battery health.

5.3 Battery Care

The AN-SX8 contains a built-in rechargeable battery. Do not attempt to replace the battery yourself. Avoid exposing the device to extreme heat or cold, as this can shorten battery life. Dispose of the battery according to local regulations.

6. Troubleshooting

• No Power: Ensure the device is fully charged. Connect it to a power source and check the charging indicator.
• No Sound:
  • Check the volume level on both the AN-SX8 and your connected device.
  • Ensure the device is correctly paired via Bluetooth or the AUX cable is securely connected.
  • If using Bluetooth, try disconnecting and re-pairing the device.
• Bluetooth Connection Issues:
  • Ensure the AN-SX8 is in pairing mode or discoverable.
  • Move the AN-SX8 closer to your Bluetooth device.
  • Turn off and on Bluetooth on your source device.
  • Clear the AN-SX8 from your device's Bluetooth list and re-pair.
• Distorted Sound:
  • Reduce the volume on both the AN-SX8 and your connected device.
  • Ensure there are no obstructions or interference between the AN-SX8 and your Bluetooth device.
  • Check the audio source for quality issues.

7. Specifications

8. Safety Information

• Do not expose the device to water, moisture, or extreme temperatures.
• Avoid prolonged listening at high volumes to prevent hearing damage.
• Do not attempt to disassemble, repair, or modify the device.
• Keep out of reach of children and pets.
• Dispose of the device and its battery responsibly according to local environmental regulations.

9. Warranty and Support

For warranty information and technical support, please refer to the official SHARP website or contact SHARP customer service. Keep your proof of purchase for warranty claims. Specific warranty terms may vary by region.

For further assistance, please visit the SHARP Support Website (example link, actual link may vary).