ANJ CS040

ANJ Mid Century Modern Accent Chair

Model: CS040 - Instruction Manual

1. Introduction

Thank you for choosing the ANJ Mid Century Modern Accent Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read all instructions carefully before assembly and retain this manual for future reference.

ANJ Mid Century Modern Accent Chair in green with a throw pillow

Figure 1: ANJ Mid Century Modern Accent Chair (Green)

2. Safety Information

To ensure safe use of your ANJ Accent Chair, please observe the following:

  • Do not exceed the maximum weight capacity of 300 lbs.
  • Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
  • Keep small parts and packaging materials away from children to prevent choking hazards.
  • Avoid standing on the chair or using it as a step stool.
  • Place the chair on a level surface to prevent tipping.

3. Package Contents

Before beginning assembly, verify that all parts and hardware are present. If any items are missing or damaged, please contact customer support.

  • Chair Backrest
  • Seat Cushion
  • Armrests (Left and Right)
  • Legs/Frame Components
  • Throw Pillow (1)
  • Assembly Hardware (screws, bolts, Allen wrench)
  • User Manual (this document)

4. Setup and Assembly

Assembly is required. Follow these steps carefully. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.

  1. Unpack Components: Carefully remove all parts from the packaging and lay them out. Check against the package contents list.
  2. Attach Armrests to Seat Frame: Align the pre-drilled holes on the armrests with the corresponding holes on the seat frame. Insert the provided bolts and tighten them using the Allen wrench. Do not overtighten initially.
  3. Attach Backrest: Slide the backrest into the designated slots on the frame. Ensure it is fully seated. Secure with bolts as instructed in the included hardware guide.
  4. Insert Seat Cushion: Place the seat cushion firmly onto the seat frame.
  5. Final Tightening: Once all components are in place, go back and securely tighten all bolts and screws.
Diagram showing the dimensions of the ANJ Mid Century Modern Accent Chair

Figure 2: Chair Dimensions for Assembly Reference

Rear view of the ANJ Mid Century Modern Accent Chair, showing the wooden frame and backrest

Figure 3: Rear view of the assembled chair, highlighting frame connections.

5. Operating Instructions

The ANJ Mid Century Modern Accent Chair is designed for comfortable seating in various indoor environments. It is ideal for:

  • Reading: The high back and ergonomic design provide excellent support for extended reading sessions.
  • Relaxing: The plush, high-density sponge cushions offer a comfortable spot to unwind.
  • Accent Seating: Its mid-century modern aesthetic enhances the decor of living rooms, bedrooms, offices, or balconies.
Image showing the ANJ Accent Chair in various room settings: living room, bedroom, meeting room, study room

Figure 4: Versatile use of the accent chair in different settings.

6. Maintenance

Proper care will extend the life and appearance of your ANJ Accent Chair:

  • Cleaning: Wipe clean with a damp cloth. For spills, blot immediately with a clean, dry cloth. Avoid harsh chemicals.
  • Cushion Care: The cushions are made of high-density sponge with a linen cover. Regularly fluff cushions to maintain their shape.
  • Frame Care: The solid wood frame can be wiped with a soft, dry cloth. Avoid excessive moisture.
  • Foot Pads: The chair includes anti-slip foot pads to protect your floor. Ensure they are intact and clean.
Close-up image highlighting the breathable linen fabric and 7-inch thick cushion of the ANJ Accent Chair

Figure 5: Detail of breathable linen fabric and cushion thickness.

Close-up of the chair's leg with an additional foot pad to prevent slipping and scratching

Figure 6: Anti-slip foot pads for floor protection.

7. Troubleshooting

If you encounter any issues with your chair, refer to the following common problems and solutions:

  • Wobbling: Check that all bolts and screws are securely tightened. Ensure the chair is on a flat, even surface.
  • Squeaking: Re-tighten all connections. A small amount of silicone lubricant can be applied to joints if squeaking persists.
  • Cushion Compression: This is normal over time. Fluff cushions regularly.
  • Missing Parts: If any parts were missing upon delivery, please contact ANJ customer support immediately.

8. Specifications

FeatureDetail
BrandANJ
Model NameCS040
ColorHigh Back-green
Overall Dimensions26"W x 32"D x 29"H
Seat Size23"W x 22"D
Item Weight35.3 pounds
Maximum Weight Recommendation300 Pounds
MaterialSolid Wood Frame, Linen Fabric, High-Density Sponge Fill
Special FeatureErgonomic, High Back, Anti-skip Foot Pads
Included ComponentsInstallation Hardware, User Manual, 1 Throw Pillow

9. Warranty and Support

For any questions, concerns, or assistance with your ANJ Mid Century Modern Accent Chair, please contact ANJ customer support. While specific warranty details are not provided in this manual, please refer to your purchase documentation or the retailer's website for warranty information. Keep your proof of purchase for any warranty claims.

Contact Information: Please refer to the contact details provided by your retailer or on the official ANJ website.

© 2026 ANJ. All rights reserved.

Related Documents - CS040

Preview Cla-Val Triples Production Output with Future-Proof Labeling
Case study detailing how Cla-Val, a leading manufacturer of automatic control valves, modernized its mission-critical labeling workflows using BarTender enterprise labeling software. This resulted in tripled production output, reduced errors, and significant cost savings.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.