Bennett Read XTR2000 High Pressure Washer Instruction Manual

1. Introduction

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Bennett Read XTR2000 High Pressure Washer. Please read these instructions carefully before using the appliance and retain them for future reference.

The Bennett Read XTR2000 is a powerful 2000W high-pressure washer designed for effective cleaning tasks. It features a maximum 150 bar pressure and 400 l/h max flow rate, making it suitable for various applications such as cleaning patios, driveways, vehicles, and outdoor furniture. Key features include a Tri-Axial plunger pump, rugged rear wheels for mobility, a large hose reel for convenient storage, and an onboard detergent bottle with semi-automatic foam producing function.

2. Safety Information

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury.

• Read All Instructions: Familiarize yourself with the controls and proper use of the pressure washer.
• Electrical Safety: Ensure the power supply matches the voltage specified on the rating label. Use a residual current device (RCD) for added protection. Do not operate with damaged cords or plugs.
• Water Connection: Connect the pressure washer to a cold water supply only. Do not use with hot water. Ensure all connections are secure to prevent leaks.
• Personal Protection: Always wear appropriate personal protective equipment, including safety glasses, hearing protection, and protective clothing.
• Operating Environment: Do not operate the pressure washer in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Keep children and pets away from the operating area.
• High Pressure Hazard: The high-pressure jet can be dangerous if misused. Never direct the jet at people, animals, electrical equipment, or the unit itself.
• Stability: Ensure the pressure washer is on a stable, level surface during operation to prevent tipping.

3. Package Contents

Verify that all components are present upon unpacking:

• Bennett Read XTR2000 Pressure Washer Unit
• High-Pressure Hose with Reel
• Spray Lance with Adjustable Nozzle
• Detergent Bottle/Tank
• Water Inlet Connector
• Instruction Manual

4. Setup

Follow these steps to assemble and prepare your pressure washer for first use:

1. Attach Wheels and Handle: Secure the rugged rear wheels and the main handle to the unit as per the diagrams in the quick-start guide (if provided).
2. Connect High-Pressure Hose: Attach one end of the high-pressure hose to the outlet on the pressure washer unit and the other end to the spray lance. Ensure connections are tight.
3. Connect Water Supply: Connect a standard garden hose (not supplied) to the water inlet connector on the pressure washer. Ensure the garden hose is free of kinks and has an adequate water supply.
4. Fill Detergent Bottle (Optional): If using detergent, fill the onboard detergent bottle with a suitable pressure washer detergent.
5. Power Connection: Plug the power cord into a grounded electrical outlet. Ensure the power switch is in the 'OFF' position before plugging in.

Image: The Bennett Read XTR2000 High Pressure Washer, showcasing its compact design, hose reel, and rugged wheels, ready for assembly and use.

5. Operating Instructions

Before starting, ensure all connections are secure and the water supply is turned on.

1. Purge Air from System: Before turning on the power, squeeze the trigger on the spray lance to allow water to flow through the system, purging any air. Continue until a steady stream of water emerges.
2. Start the Pressure Washer: Turn the power switch to the 'ON' position. The motor will start.
3. Begin Cleaning: Direct the spray lance at the surface to be cleaned, maintaining a safe distance. Squeeze the trigger to activate the high-pressure spray. Adjust the nozzle for different spray patterns (e.g., narrow jet for stubborn dirt, wider fan for general cleaning).
4. Apply Detergent (if applicable): To apply detergent, ensure the detergent bottle is filled. The pressure washer will automatically draw detergent when the appropriate nozzle setting or detergent mode is selected on the lance.
5. Shutting Down: When finished, release the trigger. Turn the power switch to the 'OFF' position. Turn off the water supply. Squeeze the trigger again to release any remaining pressure in the system.

Image: The Bennett Read XTR2000 in operation, demonstrating its ability to apply foam for effective vehicle cleaning.

6. Maintenance

Regular maintenance ensures optimal performance and extends the life of your pressure washer.

• Clean Nozzles: Periodically check and clean the nozzle for any blockages using the provided nozzle cleaning tool (if included) or a thin wire.
• Inspect Hoses and Connections: Before each use, inspect the high-pressure hose, water inlet hose, and all connections for wear, damage, or leaks. Replace damaged parts immediately.
• Drain Water for Storage: Before storing, especially in freezing temperatures, ensure all water is drained from the pump and hoses to prevent damage. Run the unit for a few seconds with the water supply disconnected and the trigger open until no more water comes out.
• Clean Exterior: Wipe down the exterior of the unit with a damp cloth. Do not use harsh chemicals.
• Hose Reel Management: Utilize the large hose reel for neat and organized storage of the high-pressure hose, preventing kinks and damage.

Image: Demonstrating the ease of winding the high-pressure hose onto the integrated reel for convenient storage and transport.

7. Troubleshooting

Refer to this section for common issues and their solutions.

8. Specifications

9. Warranty and Support

For warranty information, spare parts, or technical support, please refer to the warranty card included with your product or contact Bennett Read customer service. Keep your proof of purchase for any warranty claims.