MARVO MIC-06

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

MARVO MIC-06 Wired Microphone User Manual

Model: MIC-06

1. Introduction

Thank you for choosing the MARVO MIC-06 Wired Microphone. This manual provides essential information for the proper setup, operation, and maintenance of your microphone. Please read it thoroughly before using the product to ensure optimal performance and longevity.

2. Safety Information

  • Keep the microphone away from water or other liquids to prevent electric shock.
  • Do not expose the device to extreme temperatures or direct sunlight.
  • Avoid dropping or subjecting the microphone to strong impacts.
  • Do not attempt to disassemble or repair the microphone yourself. Contact qualified service personnel for assistance.
  • Use only the specified power source (corded electric) and compatible connectors.

3. Package Contents

The MARVO MIC-06 package includes the following items:

  • MARVO MIC-06 Wired Microphone

Note: Please check all contents upon unboxing. If any items are missing or damaged, contact your retailer.

4. Product Overview

The MARVO MIC-06 is a wired microphone designed for various applications including gaming, karaoke, and singing. It features an omnidirectional polar pattern and a 3.5mm jack for broad compatibility.

Front view of MARVO MIC-06 microphone with stand and RGB lighting

Figure 1: Front view of the MARVO MIC-06 microphone. Shows the microphone capsule, MARVO logo, control buttons, headphone jack, and the base with RGB lighting.

Side view of MARVO MIC-06 microphone with stand, cable, and RGB lighting

Figure 2: Side view of the MARVO MIC-06 microphone. Displays the microphone's profile, the integrated cable extending from the back, and the illuminated base.

5. Setup

  1. Unpack the Microphone: Carefully remove the MARVO MIC-06 microphone from its packaging.
  2. Position the Microphone: Place the microphone on a stable, flat surface. Ensure it is positioned optimally for your intended use (e.g., on a desk for gaming or recording).
  3. Connect to Device: Locate the 3.5mm audio jack on your amplifier, speaker, or other compatible device. Insert the 3.5mm connector from the MARVO MIC-06 microphone into the audio input jack of your device.
  4. Power On (if applicable): The microphone is corded electric and draws power from the connected device. Ensure your connected device is powered on.
  5. Initial Sound Check: After connecting, perform a sound check through your connected device to ensure the microphone is recognized and audio is being transmitted correctly. Adjust input levels on your device as needed.

6. Operating Instructions

The MARVO MIC-06 is designed for straightforward operation. Once connected, it functions as an audio input device.

  • Microphone Usage: Speak or sing directly into the top mesh of the microphone. The omnidirectional polar pattern captures sound from all directions around the microphone.
  • Volume Control: Adjust the microphone input volume through the settings of your connected device (e.g., computer, amplifier, karaoke machine).
  • Headphone Monitoring: The microphone features a 3.5mm headphone jack on its front. Connect your headphones here to monitor your audio in real-time, if supported by your connected device's audio configuration.
  • Noise Reduction: The microphone incorporates an IC Model: Noise reduction bbh621. Ensure proper distance from sound sources and minimize background noise for best results.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to wipe the exterior of the microphone. Do not use abrasive cleaners or solvents.
  • Storage: When not in use, store the microphone in a clean, dry place, away from dust and extreme temperatures.
  • Cable Care: Avoid bending or twisting the cable excessively. Do not pull on the cable to disconnect the microphone.

8. Troubleshooting

Problem Possible Cause Solution
No sound output from microphone.
  • Microphone not properly connected.
  • Incorrect input selected on device.
  • Microphone volume too low.
  • Faulty cable or port.
  • Ensure the 3.5mm jack is fully inserted into the correct input port.
  • Check your device's audio settings and select the correct microphone input.
  • Increase the microphone input volume on your device.
  • Test with another cable or port if available.
Sound is distorted or unclear.
  • Input volume too high.
  • Microphone too close to sound source.
  • Environmental noise.
  • Reduce the microphone input volume on your device.
  • Increase the distance between the microphone and the sound source.
  • Minimize background noise in the recording environment.

9. Specifications

Feature Detail
Model MIC-06
IC Model Noise reduction bbh621
Cord Length 1800 ± 10% mm
Microphone Sensitivity -32 ± 3dB
Frequency Response (Microphone Head) 100-16KHz
Microphone Size 165 x 90 mm
Impedance 600 Ohms
Microphone Form Factor Lavalier (Note: Product image shows desktop form factor, but specification lists Lavalier. User should refer to actual product.)
Power Source Corded Electric
Hardware Platform Karaoke Machine
Number of Channels 1
Connectivity Technology Auxiliary
Connector Type 3.5 mm Jack
Compatible Devices Amplifier, Speaker
Polar Pattern Omnidirectional
Item Weight 8.82 ounces

10. Warranty and Support

For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official MARVO website. Keep your proof of purchase for any warranty claims.

Manufacturer: MARVO

Date First Available: February 28, 2024

© 2024 MARVO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.