Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your NAOEVO 7-inch and 6-inch LED Light Bar Combo. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Safety Information
- Always disconnect power before installing or servicing the light bars.
- Ensure all wiring connections are secure and properly insulated to prevent short circuits.
- Do not look directly into the light when it is operating, as it can cause eye strain or damage.
- Install the light bars in a location that does not obstruct the driver's view or interfere with vehicle safety systems.
- Ensure the mounting surface is strong enough to support the weight of the light bars.
- This product is waterproof; however, avoid submerging it for extended periods.
Package Contents
The package includes the following items:
- 1 Pair 7-inch LED Light Bar
- 1 Pair 6-inch LED Light Bar
- Installation Accessories (brackets, bolts, nuts)
Note: Wiring harness is not included and must be purchased separately. Recommended NAOEVO wire harness: B0B44RW3CY or B0B44XN2HJ.
Image: Dimensions and package list for the 7-inch LED Light Bar. Shows the light bar, its dimensions (6.5 inches wide, 3.15 inches high), and a box indicating 1 pair of 7-inch LED light bars and installation accessories.
Image: Dimensions and package list for the 6-inch LED Light Bar. Shows the light bar, its dimensions (6.1 inches wide, 1.7 inches high), and a box indicating 1 pair of 6-inch LED light bars and installation accessories.
Specifications
| Feature | Description |
|---|---|
| Brand | NAOEVO |
| Light Source Type | LED |
| Color Temperature | 6000K (White Light) |
| Wattage (7-inch bar) | 240W |
| Lumen (7-inch bar) | 24000lm |
| Wattage (6-inch bar) | 50W |
| Beam Pattern (7-inch bar) | 30° Spotlight & 120° Floodlight Combo |
| Beam Pattern (6-inch bar) | Floodlight (120° for broad view) |
| Lens Material | Polycarbonate |
| Special Feature | Waterproof |
| Vehicle Service Type | Car (and other off-road vehicles) |
Setup and Installation
Follow these steps for proper installation of your NAOEVO LED Light Bars. A wiring harness is required and sold separately.
1. Mounting the Light Bar
- Identify a suitable mounting location on your vehicle that provides clear visibility and does not obstruct other vehicle components.
- Attach the adjustable bracket to the light bar using the provided bolts and nuts. The bracket allows for 45° adjustment of the light beam.
- Secure the light bar with the attached bracket to your desired mounting surface. Ensure all bolts are tightened securely.
Image: Illustration of the adjustable bracket, showing 45° adjustment capability for up/down/left/right positioning.
Image: Three-step visual guide for mounting the light bar: 1. Attach bracket to vehicle. 2. Attach light bar to bracket. 3. Adjust and secure.
2. Wiring Connection
The light bars are designed for easy connection. A wiring harness (not included) is recommended for safe and efficient operation.
- Connect the positive (+) wire from the light bar to the positive terminal of your wiring harness.
- Connect the negative (-) wire from the light bar to the negative terminal of your wiring harness or a suitable ground point on the vehicle chassis.
- Ensure all connections are tight and protected from moisture and abrasion.
- Connect the wiring harness to your vehicle's power source (e.g., battery) via a relay and fuse, and connect the switch for control.
Image: Simplified wiring diagram showing two light bars connected to a wiring harness with a relay, fuse, and switch, powered by a vehicle battery.
Operating Instructions
The NAOEVO LED Light Bars provide powerful illumination for various driving conditions. The 7-inch light bar features a spot and flood combo beam, while the 6-inch light bar provides a wide flood beam.
Beam Patterns
- 7-inch Light Bar: Combines a 30° spotlight for high-focus, long-range illumination and a 120° floodlight for wider area coverage. This combination enhances visibility for off-road driving at night.
- 6-inch Light Bar: Features a 120° flood beam, providing broad view and excellent light transmittance for clearer and wider vision.
Image: Diagram illustrating the spot and flood combo beam pattern of the 7-inch light bar. Shows a 15° spotlight for high focus and long distance, and a 120° floodlight for a wide field of vision.
Image: Close-up view of the light bar's LEDs, detailing the 30° spotlight reflector for high focus and long distance, and the 120° flood beam for broad view with 97% light transmittance.
Powering On/Off
Once properly wired, use the connected switch to turn the light bars on or off. Ensure the vehicle's electrical system can support the combined wattage of the light bars.
Maintenance
Regular maintenance ensures optimal performance and longevity of your LED light bars.
- Cleaning: Periodically clean the lens with a soft cloth and mild soap solution to remove dirt, dust, and debris. Avoid abrasive cleaners that could scratch the polycarbonate lens.
- Connection Check: Regularly inspect all wiring connections for corrosion, looseness, or damage. Ensure they remain secure and properly insulated.
- Mounting Check: Verify that the mounting brackets and hardware are still tight and secure, especially after off-road use or exposure to vibrations.
- Waterproof Seal: While waterproof, avoid high-pressure washing directly at the seals.
Troubleshooting
If you encounter issues with your LED light bars, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light bar does not turn on. | No power, loose connection, blown fuse, faulty switch. | Check power supply, inspect all wiring connections, replace fuse if blown, test switch functionality. |
| Light bar is dim or flickers. | Insufficient power, poor ground connection, damaged wiring. | Ensure adequate voltage, check ground connection for corrosion, inspect wiring for damage. |
| Moisture inside the lens. | Compromised seal, extreme temperature changes. | Small amounts of condensation may dissipate. If persistent or significant, contact support. Ensure proper installation to avoid seal damage. |
Wide Application
These NAOEVO LED Light Bars are versatile and suitable for a variety of applications, enhancing visibility and safety.
- Off-Road Lights: Ideal for ATVs, UTVs, SUVs, Jeeps, and other off-road vehicles.
- Work Lights: Suitable for construction vehicles, agricultural machinery, and other work environments.
- Fog Lights & Driving Lights: Improves visibility in adverse weather conditions or for extended night driving.
- Other Uses: Can be used for travel, long-distance transportation, or as courtyard lighting.
Image: Collage showing the LED light bars installed on various vehicles including a Jeep, a semi-truck, an ATV, and another off-road vehicle, demonstrating their wide range of applications.
Warranty and Support
NAOEVO products are designed for durability and performance. For specific warranty details, please refer to the warranty information provided with your purchase or visit the official NAOEVO website.
If you encounter any issues or have questions regarding your LED light bars, please contact NAOEVO customer support through their official channels or the retailer from whom you purchased the product.
For more information, visit the NAOEVO Store on Amazon.