OPPSK 36LEDs RGB Par Lights (2 Pack) Instruction Manual

1. Introduction

This manual provides detailed instructions for the safe and effective use of your OPPSK 36LEDs RGB Par Lights. Please read this manual thoroughly before operation and retain it for future reference.

The OPPSK 36LEDs RGB Par Lights are designed to provide dynamic and vibrant lighting effects for various events. Featuring 36 RGB LEDs, these lights offer smooth color transitions and a wide range of hues. They are equipped with multiple control options for versatile operation.

Image 1: Two OPPSK 36LEDs RGB Par Lights with included remote control.

2. Package Contents

Verify that all components are present in your package:

• 2 x OPPSK 36LEDs RGB Par Lights
• 1 x Remote Control
• 1 x User Manual (this document)

Image 2: Package contents showing two par lights, mounting hardware, and remote.

3. Setup

3.1 Physical Installation

The OPPSK 36LEDs RGB Par Lights are designed for floor mounting or truss mounting using the included dual brackets. Ensure the mounting surface is stable and capable of supporting the weight of the fixture.

• Floor Mount: Position the light on a flat, stable surface using the integrated brackets as a stand.
• Truss Mount: Securely attach the brackets to a compatible truss system using appropriate clamps (not included). Ensure all connections are tightened to prevent movement.

3.2 Power Connection

Connect the integrated power cable to a standard 110V AC power outlet. Ensure the power source matches the voltage requirements of the fixture.

3.3 DMX Connection (Optional)

For DMX control, connect a DMX controller to the DMX IN port of the first light using a 3-pin DMX cable. To link multiple lights, connect the DMX OUT port of the first light to the DMX IN port of the next light in the chain. Ensure the last light in the DMX chain has a DMX terminator (not included) connected to its DMX OUT port for optimal signal integrity.

Image 3: Rear panel of the par light with DMX connections and power input.

4. Operating Instructions

The OPPSK 36LEDs RGB Par Lights offer multiple operating modes, controllable via the onboard digital display and buttons, or the included IR remote control.

4.1 Onboard Control Panel

The rear panel features a digital display and four buttons: MENU, UP, DOWN, and ENTER. Use these buttons to navigate through the menu and select desired modes and settings.

• MENU: Cycles through the main menu options.
• UP/DOWN: Adjusts values or navigates within a menu option.
• ENTER: Confirms selection.

4.2 Remote Control Operation

The included IR remote provides convenient access to various functions. Point the remote directly at the light's IR receiver for best performance.

Image 4: Remote control layout with function descriptions.

Key remote functions include:

• Black Out: Turns off all lights.
• DMX Mode: Activates DMX control.
• Auto Mode: Cycles through pre-programmed light shows.
• Hopping Mode: Changes colors with a jump effect.
• Gradual: Smooth color transitions.
• Flash Mode: Strobe effect.
• Sound-active Mode: Lights react to sound.
• Speed +/-: Adjusts the speed of dynamic modes.
• Color Buttons (Red, Green, Blue, Rose, Amber, Cyan, White): Selects static colors.

4.3 Available Modes

• Auto Mode: The light automatically cycles through various pre-programmed color changes and effects.
• Sound Activated Mode: The light's effects respond to ambient sound or music detected by the built-in microphone.
• Master-Slave Mode: Connect multiple lights via DMX cables. Set one light as the 'Master' and others as 'Slave' to synchronize their effects.
• DMX512 Control: For advanced control, connect to a DMX controller to customize colors, dimming, strobe, and other parameters. The DMX channels are typically 4-channel or 7-channel, allowing for precise control over Red, Green, Blue, Dimmer, Strobe, and various mode selections.
• Static Color Mode: Select a single static color (Red, Green, Blue, or mixed colors) using the remote or onboard menu.

Image 5: Demonstration of RGB color mixing capabilities.

4.4 Official Product Video: OPPSK Stage Lights

Video 1: An official product video from OPPSK demonstrating the functionality and various lighting effects of the 36LEDs RGB Par Lights.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your par lights.

• Cleaning: Periodically clean the lens and exterior housing with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Inspection: Regularly check power cables and DMX connections for any signs of wear or damage. Replace damaged cables immediately.
• Storage: When not in use, store the lights in a cool, dry place away from direct sunlight and extreme temperatures.

6. Troubleshooting

If you encounter issues with your OPPSK 36LEDs RGB Par Lights, refer to the following common troubleshooting steps:

• No Power: Ensure the power cable is securely connected to both the light and a working power outlet. Check the power source.
• No Light Output: Verify the light is not in 'Black Out' mode (check remote or DMX controller settings). Ensure the brightness is not set to zero.
• Remote Not Responding: Ensure there are no obstructions between the remote and the light's IR receiver. Check the remote's battery.
• DMX Control Issues: Verify DMX cables are correctly connected (IN to OUT). Ensure the DMX address is correctly set on each fixture and matches your controller. Confirm a DMX terminator is used on the last fixture in the chain.
• Sound Active Mode Not Working: Ensure the microphone is not obstructed and there is sufficient sound for the light to react. Adjust sound sensitivity if available.

If problems persist, contact customer support for further assistance.

7. Specifications

8. Warranty and Support

For warranty information or technical support, please contact OPPSK customer service. Refer to the product packaging or the official OPPSK website for contact details.