Introduction
The InnoVibe Toilet Disco Speaker Light is a motion-activated LED light and Bluetooth speaker designed to enhance your bathroom experience. This device features multiple light modes, a wireless speaker for audio streaming, and a flexible design for easy installation. This manual provides detailed instructions for proper setup, operation, and maintenance of your device.
Safety Information
- Do not immerse the device in water. It is water-resistant, not waterproof.
- Keep out of reach of children.
- Use only the provided or a certified USB charging cable.
- Avoid extreme temperatures.
- Do not attempt to disassemble or repair the device yourself. Contact customer support if needed.
Package Contents
Please check the package for the following items:
- InnoVibe Toilet Disco Speaker Light (Model INTL1509SP)
- USB Charging Cable
- Instruction Manual
Product Overview
Familiarize yourself with the components of your InnoVibe Toilet Disco Speaker Light:
Image: Diagram of the InnoVibe Toilet Disco Speaker Light components.
- Motion Sensor: Detects movement to activate the light.
- Flexible Clip: Allows for secure attachment to the toilet bowl rim.
- Wireless Speaker: For Bluetooth audio playback.
- Disco Light: Projects various colors and patterns.
- USB Charging Port: For recharging the internal battery.
Setup
1. Charging the Device
Before first use, fully charge the device using the provided USB cable. Connect the USB cable to the device's charging port and a standard USB power adapter (not included). The charging indicator light will show the charging status.
2. Installation
The device features an adjustable, flexible arm designed to fit around any toilet bowl rim. Bend the arm to securely attach the disco light unit to the rim of your toilet bowl. Ensure the motion sensor is facing outwards for optimal detection.
Image: Close-up of the InnoVibe Toilet Disco Speaker Light.
3. Bluetooth Pairing
To use the wireless speaker function:
- Turn on the InnoVibe Toilet Disco Speaker Light.
- Enable Bluetooth on your smartphone or other audio device.
- Search for available Bluetooth devices and select "InnoVibe Speaker" (or similar name) to pair.
- Once paired, you can stream audio from your device to the speaker.
Operating Instructions
Motion-Activated Light
The LED Toilet Light is equipped with a high-quality light sensor and motion sensor. It will automatically turn on when it detects movement in a dark environment and will remain on for approximately 2 minutes after motion ceases.
Light Modes
The device offers various light modes to suit your preference:
- Individual Colors: Enjoy vibrant single colors including blue, red, purple, and green.
- Disco Mode: Switches between all four colors for a dynamic light show.
Refer to the device's controls (buttons or switches) to cycle through the available light modes.
Image: Various light modes displayed by the InnoVibe Toilet Disco Speaker Light.
Wireless Speaker
After successful Bluetooth pairing, you can play music or other audio through the integrated speaker. Control playback and volume directly from your connected device.
Maintenance
Cleaning
The simple design of the InnoVibe Toilet Disco Speaker Light makes it easy to clean. Use a damp cloth to wipe down the exterior. Do not use abrasive cleaners or submerge the device in water.
Battery Care
Recharge the device when the battery is low to ensure continuous operation. Avoid completely draining the battery frequently to prolong its lifespan.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light not turning on | Low battery; insufficient darkness; motion sensor obstructed or faulty. | Charge the device. Ensure the environment is dark enough for activation. Clear any obstructions from the motion sensor. |
| Light stays on constantly | Motion sensor malfunction or continuous motion detected. | Ensure no continuous motion is present. If the issue persists, the sensor may be faulty. Try resetting the device by turning it off and on. |
| Bluetooth not connecting | Device not in pairing mode; out of range; already connected to another device. | Ensure the device is powered on and in pairing mode. Move your audio device closer. Disconnect from other Bluetooth devices. |
| Poor sound quality | Low battery; device too far from audio source; interference. | Charge the device. Move the audio source closer. Reduce potential interference from other electronic devices. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | INTL1509SP |
| Power Source | USB Rechargeable |
| Light Source Type | LED |
| Brightness | 200 lumens |
| Bulb Features | Motion sensing |
| Product Dimensions | 3.4"L x 3"W x 3.5"H |
| Item Weight | 2.4 ounces |
| Material | Plastic |
| Color | Multicolored |
| UPC | 810106634913 |
Warranty and Support
InnoVibe products are designed for quality and reliability. For warranty information, technical support, or any questions regarding your Toilet Disco Speaker Light, please refer to the contact information provided on the product packaging or visit the official InnoVibe website. Please retain your proof of purchase for warranty claims.
