1. Safety Information
Please read all instructions carefully before assembly and use. Retain this manual for future reference.
- Weight Capacity: Do not exceed the maximum weight capacity of 800 pounds.
- Assembly: Ensure all components are securely fastened before use.
- Pinch Points: Be cautious of sharp edges and pinch points during assembly and when moving the frame.
- Floor Protection: Consider placing a rug or protective pads under the bed legs, especially on hardwood floors, to prevent scratches and potential movement.
2. Product Overview
The GAOMON 14 Inch Full Size Metal Bed Frame provides a sturdy foundation for your mattress without the need for a box spring. It features a durable metal construction, steel slat support, and offers under-bed storage space.
Key Features:
- Sturdy Construction: Made with premium-grade metal and reinforced joints for stability.
- No Box Spring Required: Steel slats provide direct support for various mattress types (latex, memory foam, innerspring).
- Noise-Free Design: Includes foam seal tape and tightly clamped slats to minimize noise.
- Ample Storage: Approximately 14 inches of vertical clearance beneath the frame for storage.
- Easy Assembly: Designed for straightforward setup with included tools and instructions.
- Floor Protection: Equipped with protective footpads to prevent floor scratches.
- Headboard Compatibility: Features reserved holes for attaching a headboard (headboard not included).
Figure 2.1: Fully assembled GAOMON Full Size Metal Bed Frame, showcasing its design and under-bed clearance.
Figure 2.2: Detailed dimensions of the Full Size bed frame: 75.2 inches (L) x 53.9 inches (W) x 14 inches (H).
3. Setup and Assembly
The GAOMON Metal Bed Frame is designed for easy assembly. All necessary tools and instructions are included in the packaging. It is recommended to assemble the frame with two people.
Assembly Steps:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface (e.g., a carpet or blanket) to prevent scratches. Verify all parts are present against the included parts list.
- Assemble Frame Sections: Connect the main frame sections according to the visual instructions provided in the manual. Ensure all bolts are finger-tightened initially.
- Attach Support Legs: Securely attach all support legs to the frame.
- Install Slats: Place the steel slats into their designated positions on the frame. Ensure they are properly seated and secured. Apply foam seal tape if provided, to minimize noise.
- Tighten All Fasteners: Once all components are in place, systematically tighten all bolts and screws using the provided tool. Do not overtighten.
- Final Check: Gently shake the frame to ensure it is stable and all connections are secure.
Figure 3.1: Top view of the assembled bed frame structure, illustrating the slat placement and support system.
Figure 3.2: Visual details of the stable support system, the no-slip design for mattress retention, and the noise-free connection points.
4. Operating Instructions
Once assembled, the bed frame is ready for use.
- Mattress Placement: Carefully place your full-size mattress directly onto the steel slats. No box spring is needed.
- Under-bed Storage: Utilize the 14-inch clearance for storing items in bins or containers.
- Headboard Attachment: If desired, attach a compatible headboard to the pre-drilled holes at the head of the frame.
Figure 4.1: The bed frame with a mattress and examples of items stored underneath, demonstrating the available storage space.
5. Maintenance
Regular maintenance helps ensure the longevity and performance of your bed frame.
- Cleaning: Wipe the metal frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Fastener Check: Periodically check all bolts and screws to ensure they remain tight. Retighten if necessary.
- Slat Inspection: Inspect the steel slats for any signs of damage or bending. Replace any damaged slats immediately to maintain mattress support.
- Floor Protection: Verify that the protective footpads are intact and in place to continue protecting your flooring.
6. Troubleshooting
Refer to this section for solutions to common issues.
- Squeaking Noises:
- Ensure all bolts and screws are securely tightened.
- Check if the foam seal tape is properly applied between metal contact points.
- Verify that the mattress is centered and not causing friction against the frame edges.
- Frame Instability/Wobbling:
- Confirm that all frame sections are correctly interlocked and all fasteners are tight.
- Ensure the bed is on a level surface.
- Legs Damaging Floor/Moving:
- Ensure protective footpads are present on all legs.
- For hardwood floors, placing a rug or additional non-slip pads under the bed legs can prevent movement and damage.
7. Specifications
| Attribute | Detail |
|---|---|
| Brand | GAOMON |
| Model Number | PHO_0PU0 |
| Size | Full |
| Product Dimensions | 75.2"L x 53.9"W x 14"H |
| Material | Metal |
| Color | Black |
| Finish Type | Powder Coated |
| Special Features | No Box Spring Needed, Squeak Resistant, Under-bed storage |
| Assembly Required | Yes |
| Item Weight | 29.9 pounds |
| UPC | 196336789389 |
Figure 7.1: Details on the reinforced structure for stability, plastic mats for floor protection, and pre-drilled holes for headboard attachment.
8. Warranty and Support
GAOMON is committed to providing quality products and customer satisfaction.
- Warranty Information: Specific warranty details are typically provided with your purchase documentation. Please refer to the information included in your product packaging or contact GAOMON customer service for details.
- Customer Service: If you have any questions, require assistance with assembly, or encounter any issues with your bed frame, please contact GAOMON customer service. Our team is available to provide support.
