Introduction
This manual provides essential instructions for the safe and effective use of your Benro Superslim Carbon-Fiber Tripod with N00P Ball Head (Model TSSL08CN00P). Please read this manual thoroughly before operating the product and retain it for future reference.
Image: Benro Superslim Carbon-Fiber Tripod with N00P Ball Head. This image displays the tripod in its extended form with a camera mounted, showcasing its compact design and ball head.
Package Contents
Verify that all items are present in the package:
- Benro Superslim Carbon-Fiber Tripod (TSSL08CN00P)
- N00P Ball Head
- Quick-Release Plate
- Drawstring Bag
Setup
- Unfolding the Tripod: Gently extend the tripod legs from their folded position.
- Extending the Legs: Unlock the all-metal twist locks on each leg section. Extend the legs to the desired height and then firmly twist the locks clockwise to secure them. The 4-section legs allow for flexible height adjustments.
- Attaching the Quick-Release Plate: Locate the quick-release plate. Attach it to the bottom of your camera by screwing the mounting screw into the camera's tripod socket. Ensure it is securely fastened.
- Mounting the Camera: Open the clamp on the N00P ball head. Slide the quick-release plate with your camera into the clamp until it clicks into place. Tighten the clamp lever to ensure the camera is firmly secured.
- Leveling the Tripod: Utilize the built-in bubble levels located on both the ball head and the tripod chassis to ensure your setup is perfectly level before shooting.
Operating Instructions
- Adjusting Tripod Height: Loosen the leg twist locks, extend or retract the leg sections to achieve the desired height (up to 57.6 inches / 146 cm), and then firmly re-tighten the twist locks.
- Adjusting the Ball Head: The N00P ball head features a main locking knob to control the ball's movement. Loosen this knob to adjust your camera's angle and position, then tighten it to secure.
- Panoramic Movement: The ball head also includes a separate panoramic lock for smooth 360-degree rotation without affecting the camera's tilt. Loosen this lock for panoramic adjustments and tighten to secure.
- Low-Angle Shooting: For ultra-low angle photography, the tripod features a split center-column design. This allows the center column to be shortened or removed, enabling the tripod to achieve very low shooting positions.
- Accessory Attachment: The tripod is equipped with multiple ¼-20 accessory mounts. These allow for the attachment of additional equipment such as external monitors, microphones, or lighting.
- Load Capacity: The tripod is designed to support equipment weighing up to 8.8 lb (4 kg). Ensure your camera and accessories do not exceed this limit for optimal stability.
Maintenance
- Cleaning: Wipe down the carbon fiber legs and metal components with a soft, dry cloth after each use. For stubborn dirt, use a slightly damp cloth and then dry thoroughly. Avoid harsh chemicals.
- Lubrication: Do not apply lubricants to the leg locks or ball head mechanisms unless specifically instructed by Benro support. Improper lubrication can attract dust and impair function.
- Storage: When not in use, collapse the tripod to its compact size (~20.1 inches / 51 cm folded length, ~3.2 inches / 8 cm folded width) and store it in the provided drawstring bag in a dry, dust-free environment.
- Inspection: Periodically check all screws, knobs, and leg locks for tightness. Ensure the quick-release plate mechanism operates smoothly.
Troubleshooting
- Tripod Instability: Ensure all leg twist locks are fully tightened. Verify that the quick-release plate is securely fastened to both the camera and the ball head. Check that the tripod is placed on a stable, level surface.
- Difficulty Adjusting Legs: If leg sections are stiff, ensure the twist locks are fully loosened before attempting to extend or retract. Clean any dirt or debris from the leg sections.
- Ball Head Not Holding Position: Ensure the main locking knob on the ball head is fully tightened after positioning your camera. Do not exceed the maximum load capacity of 8.8 lb (4 kg).
- Camera Not Level: Re-check the bubble levels on both the tripod and ball head. Adjust leg lengths or ball head tilt as necessary to achieve a level horizon.
Specifications
| Feature | Specification |
|---|---|
| Model Name | TSSL08CN00P |
| Material | Carbon Fiber |
| Tripod Head Type | Ball Head (N00P Arca-type) |
| Maximum Height | 61.42 inches (156 cm) |
| Folded Length | 20.1 inches (51 cm) |
| Folded Width | 3.2 inches (8 cm) |
| Item Weight | 2.24 pounds (1.02 kg) |
| Weight Limit | 8.82 pounds (4 kg) |
| Leg Sections | 4 |
| Accessory Mounts | Multiple ¼-20 threads |
| Special Features | Built-in bubble levels, Split center-column |
Warranty Information
The Benro Superslim Carbon-Fiber Tripod (TSSL08CN00P) comes with a standard limited warranty of 3 years from the date of purchase for the original owner. If you register the product online, the warranty is extended by an additional 2 years, totaling 5 years, in applicable regions. Please visit the official Benro website for warranty registration and full terms and conditions.
Support
For further assistance, technical support, or to inquire about replacement parts, please contact Benro customer service. You can also visit the official Benro store for more product information and resources:
