1. Introduction and Product Overview
This manual provides comprehensive guidance for the installation, operation, and maintenance of the EMKE 1600x240mm Anthracite Double Layer Oval Tube Vertical Radiator. Please read these instructions carefully before installation and use to ensure safe and efficient operation.
The EMKE vertical radiator features an oval tube design, central connection, and a double-layer construction for efficient heat dissipation. Its anthracite finish offers a modern aesthetic suitable for various interior designs.
Image 1.1: EMKE Vertical Radiator in a bathroom setting, showcasing its design and vertical orientation.
2. Safety Information
- Always ensure the main heating system is turned off and depressurized before attempting any installation or maintenance.
- Installation should be performed by a qualified professional if you are unsure about any steps.
- Wear appropriate personal protective equipment (PPE) such as gloves and eye protection during installation.
- Do not place flammable materials near the radiator.
- Keep children and pets away from the radiator when it is hot to prevent burns.
- Ensure all connections are properly sealed to prevent leaks.
3. Package Contents
Verify that all components listed below are present in your package:
- EMKE Vertical Radiator (1 unit)
- Mounting Kit (includes brackets, screws, wall plugs)
- Installation Instructions (this manual)
Image 3.1: Illustration of the included accessories: 4 blind plugs, 8 long screws, 2 rubber rings, and 4 rubber supports for mounting.
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | OR-K-DEVC |
| Dimensions (Height x Width) | 1600 x 240 mm |
| Heat Output | 623 W |
| Recommended Room Size | Approximately 8 square meters |
| Color | Anthracite |
| Layer Type | Double Layer |
| Connection Thread | G1/2" |
| Connection Spacing (Center) | 50 mm |
| Distance from Wall to Inlet Tube Center | 51 mm |
| Material | Low-carbon SPCC Steel |
| Energy Type | Hot Water Central Heating System |
| Valves | Not included |
| Product Weight | 19 kg |
| Compliance | Manufactured according to EN442 standard |
Image 4.1: Detailed view of the G1/2" connection thread and 50mm connection spacing at the bottom of the radiator.
Image 4.2: Technical drawing illustrating the radiator's dimensions (1600mm height, 240mm width) and G1/2" connection details.
5. Installation (Setup)
5.1 Pre-Installation Checks
- Ensure the wall is suitable to bear the weight of the radiator (19 kg dry weight, plus water).
- Confirm that the central heating system is drained and isolated.
- Unpack all components and check for any damage.
5.2 Mounting the Radiator
- Marking: Use the provided mounting brackets to mark the drilling points on the wall. Ensure the marks are level and correspond to the radiator's dimensions.
- Drilling: Drill holes at the marked points using an appropriate drill bit for your wall type. Insert the wall plugs.
- Attaching Brackets: Securely fasten the mounting brackets to the wall using the long screws.
- Hanging the Radiator: Carefully lift the radiator and hang it onto the installed brackets. Ensure it is stable and level.
5.3 Connecting to the Heating System
The EMKE radiator offers flexible connection options:
- Central Connection: This is the primary connection method, allowing for the use of either a split valve or a combined valve.
- End Connection (Left or Right): The radiator can also be connected from either the left or right end. For this method, a split valve must be used.
Connect the radiator to your hot water central heating system using G1/2" fittings. Ensure all connections are tightened and sealed to prevent leaks. Valves are not included and must be purchased separately.
Image 5.1: Illustration of the two available connection methods: central connection (Mittelanschluss) and end connection (Anschluss an beiden Enden).
6. Operation
Once installed and connected to your hot water central heating system, the EMKE radiator operates as part of your home's heating infrastructure. To activate the radiator, ensure your central heating system is turned on and the radiator valves are open.
- Heating: The radiator will begin to heat up as hot water circulates through its double-layer oval tubes.
- Temperature Control: Adjust the room temperature using your central heating thermostat and the individual radiator valves (if installed) to achieve your desired comfort level.
- Bleeding: Periodically bleed the radiator to release any trapped air, which can reduce heating efficiency. Use a radiator key to open the bleed valve until water starts to emerge, then close it.
7. Maintenance
Regular maintenance ensures the longevity and efficient performance of your EMKE radiator.
- Cleaning: Clean the radiator regularly with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the anthracite finish.
- Inspection: Periodically inspect the radiator for any signs of corrosion, leaks, or damage. Address any issues promptly.
- System Checks: Ensure your central heating system is maintained according to its manufacturer's recommendations.
Image 7.1: Illustration of the high-quality material construction, including the corrosion protection layer, low-carbon SPCC steel, and external coating, ensuring durability.
Image 7.2: Depiction of the advanced 360° welding technique, which ensures a smooth surface and prevents leaks by testing under pressure.
8. Troubleshooting
If you encounter issues with your EMKE radiator, consider the following common troubleshooting steps:
- Radiator Not Heating:
- Check if the central heating system is operational.
- Ensure radiator valves are fully open.
- Bleed the radiator to remove trapped air.
- Verify that the system pressure is adequate.
- Uneven Heating:
- Bleed the radiator; trapped air often causes cold spots.
- Ensure proper water flow through the system.
- Leaks:
- Immediately turn off the central heating system and isolate the radiator if possible.
- Tighten connections at the valves and pipework.
- If a leak persists or originates from the radiator body, contact a qualified plumber.
For persistent issues, it is recommended to consult a qualified heating engineer.
9. Warranty and Support
EMKE provides comprehensive services to ensure a smooth purchasing experience and product satisfaction.
- Return Policy: A 14-day return policy is offered.
- Repair Service: The product includes a 2-year repair service.
For further assistance, technical support, or warranty claims, please contact EMKE customer service through your point of purchase or the official EMKE website.
