Introduction
Thank you for choosing the HATOKU Second Generation Wireless Stylus for iPad. This stylus is designed to enhance your iPad experience with features like magnetic wireless charging, palm rejection, and tilt sensitivity. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance.
Package Contents
Upon unboxing, please verify that all items listed below are present and in good condition:
- 1 x HATOKU Second Generation Wireless Stylus
- 3 x Replaceable Pen Nibs
- 1 x USB-C Charging Cable
- 1 x User Manual
Compatibility
The HATOKU Stylus is compatible with a wide range of iPad models. Please check your iPad model number to confirm compatibility.
Supported iPad Models (2018-2023):
- iPad 6th, 7th, 8th, 9th, 10th Generation
- iPad Air 3rd, 4th, 5th Generation
- iPad Mini 5th, 6th Generation
- iPad Pro 11-inch (1st, 2nd, 3rd, 4th Generation)
- iPad Pro 12.9-inch (3rd, 4th, 5th, 6th Generation)
Magnetic Charging Compatibility:
Magnetic wireless charging is supported only on the following models:
- iPad Air 4th, 5th Generation
- iPad Mini 6th Generation
- iPad Pro 11-inch (all generations)
- iPad Pro 12.9-inch (all generations)
Setup
Initial Charging:
Before first use, it is recommended to fully charge the stylus. You have two charging options:
- USB-C Fast Charging: Connect the provided USB-C cable to the stylus's charging port and a compatible USB power adapter. A full charge takes approximately 30 minutes.
- Magnetic Wireless Charging: For compatible iPad models (listed in the Compatibility section), simply attach the stylus magnetically to the side of your iPad. The stylus will begin charging wirelessly. A full magnetic charge takes approximately 1.5 hours.
Pairing:
The HATOKU Stylus does not require Bluetooth pairing or any special applications. Simply press the power button located at the top of the stylus to turn it on. It will automatically connect to your iPad, ready for use.
Operating Instructions
Basic Use:
Once powered on, the stylus is ready for writing, drawing, marking, signing, and taking notes directly on your iPad screen.
Palm Rejection:
The stylus features palm rejection technology, allowing you to rest your hand naturally on the iPad screen while writing or drawing without causing unintended marks or interference.
Tilt Function:
The stylus is equipped with tilt sensing technology. This allows you to vary the thickness and depth of your lines by simply tilting the stylus, mimicking the effect of a traditional pencil or brush. Note that this stylus does not have pressure sensitivity.
Battery Level Indicator:
When connected to your iPad via Bluetooth (for battery level display only, not for operation), you can view the stylus's battery level directly in the iPad's status bar or through the battery widget.
Smart Power Off:
To conserve battery, the stylus will automatically power off after 5 minutes of inactivity.
Charging
The HATOKU Stylus offers flexible charging options:
- USB-C Charging: Provides a full charge in approximately 30 minutes, offering up to 10 hours of continuous use.
- Magnetic Wireless Charging: For compatible iPad models, charging takes about 1.5 hours for a full charge.
Ensure the stylus is properly aligned for magnetic charging. The iPad's battery widget will display the stylus's charge status.
Maintenance
Replacing Pen Nibs:
Over time, the pen nib may wear down. Replace it with one of the included spare nibs to maintain optimal performance.
- Gently twist the old nib counter-clockwise to remove it.
- Align a new nib with the stylus tip and twist clockwise until securely fastened. Do not overtighten.
Cleaning:
Wipe the stylus body with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stylus not responding | Battery is low or depleted. Stylus is off. | Charge the stylus. Press the power button to turn it on. Ensure iPad is compatible. |
| Magnetic charging not working | iPad model is not compatible with magnetic charging. Stylus not properly aligned. | Refer to the Compatibility section. Realign the stylus on the iPad's magnetic strip. Use USB-C charging as an alternative. |
| Palm rejection not working | Ensure your iPad's settings do not interfere with stylus input. | Check iPad settings for any conflicting stylus or accessibility options. |
| Inaccurate or skipping lines | Worn-out pen nib. Screen protector interference. | Replace the pen nib. Ensure screen protector is thin and properly applied. |
Specifications
- Brand: HATOKU
- Model Number: ID766
- Color: Yellow
- Material: Aluminum
- Compatible Devices: Tablet (iPad 2018-2023 models)
- Battery Type: Lithium Polymer
- Charging Time (USB-C): Approx. 30 minutes
- Charging Time (Magnetic): Approx. 1.5 hours
- Continuous Use Time: Up to 10 hours
- Auto Power-off: After 5 minutes of inactivity
- Dimensions (L x W x H): 166 x 7 x 7 mm
- Features: Magnetic Wireless Charging, USB-C Fast Charging, Palm Rejection, Tilt Sensitivity, Replaceable Nibs, Battery Level Indicator
- UPC: 199284573345
Warranty and Support
HATOKU provides a 1-year warranty from the date of purchase for this product. This warranty covers manufacturing defects and malfunctions under normal use.
For technical assistance, warranty claims, or any questions regarding your HATOKU Stylus, please contact our customer support team. We offer 24/7 online support.
In case of issues, we are committed to providing a refund or replacement as per our warranty policy.
For further assistance, please visit our official website or contact us via the details provided on your purchase receipt.
