A-premium APSP225

A-Premium Iridium & Platinum Spark Plugs (APSP225) Instruction Manual

Model: APSP225 | Brand: A-Premium

1. Product Overview

A-Premium Spark Plugs are designed to replace original equipment spark plugs, meeting or exceeding OEM specifications for optimal performance and durability. These Iridium & Platinum spark plugs are engineered for enhanced ignition and longevity.

1.1 Vehicle Compatibility

These spark plugs are compatible with the following vehicle models:

  • Chevrolet Spark: 2013-2015 L4 1.2L
  • Fiat 500: 2012-2017 L4 1.4L (Naturally Aspirated Only)

Reference Numbers: 97637, SP192435AA, DCPR7EIX, 6046, 4983, DCPR7EN10, 1682, DCPR7EGP.

Image showing vehicle compatibility and reference numbers for A-Premium spark plugs.

Figure 1: Compatibility and Reference Numbers

1.2 Key Features

  • Center Electrode Tip Material: Iridium
  • Center Electrode Core Material: Platinum
  • Resistance (ohms): 1000
  • Gap Size (IN): 0.027"-0.031"
  • Nickel-plated threads with anti-seizing properties.
  • Fine iridium tip ensures consistent sparks.
  • Optimum heat range enhances durability.
  • Engineered for maximum ignition performance, leading to quicker and smoother starts and improved fuel economy.
Close-up image of an A-Premium Iridium spark plug, highlighting its iridium center electrode and nickel-plated threads.

Figure 2: Iridium Center Electrode Features

Diagram illustrating the internal and external components of a spark plug, including the needle-shaped ground electrode, center electrode, solid copper core, corrugated ribs, gasket seat, metal shell, high alumina ceramic, ribbed insulator, and alloy terminal.

Figure 3: Spark Plug Component Diagram

2. Installation Instructions

Proper installation of spark plugs is crucial to prevent engine damage and ensure optimal performance. It is highly recommended to consult a professional mechanic for installation, especially if you are unfamiliar with the process.

General Installation Steps:

  1. Ensure the engine is cool before starting.
  2. Disconnect the battery's negative terminal.
  3. Remove spark plug wires or coil packs.
  4. Clean the area around the spark plugs to prevent debris from entering the combustion chamber.
  5. Remove old spark plugs using a spark plug socket.
  6. Inspect the new spark plugs for correct gap (0.027"-0.031"). Do not adjust the gap on iridium/platinum plugs unless specifically instructed by the manufacturer, as this can damage the fine electrode.
  7. Install new spark plugs by hand to avoid cross-threading.
  8. Tighten the spark plugs to the specified torque using a torque wrench. Refer to the torque specifications below.
  9. Reinstall spark plug wires or coil packs and reconnect the battery.

2.1 Spark Plug Torque Specifications

Refer to the following table for recommended torque specifications. Always confirm with your vehicle's service manual for precise values.

Plug TypeIron CoverAluminum Cover
N.mKgf.mN.mKgf.m
Flat Type (with gasket)15 – 251.5 – 2.615 – 261.5 – 2.6
Taper Type (without gasket)10 – 201.0 – 2.010 – 201.0 – 2.0
10mm Flat Seat10 – 151.0 – 1.510 – 151.0 – 1.5
12mm Flat Seat15 – 251.5 – 2.615 – 261.5 – 2.6
14mm Flat Seat20 – 402.0 – 4.120 – 402.0 – 4.1
14mm Flat Seat10 – 201.0 – 2.010 – 201.0 – 2.0
18mm Flat Seat35 – 453.6 – 4.630 – 403.6 – 4.1
18mm Taper Seat20 – 302.0 – 3.120 – 302.0 – 3.1
Image showing spark plug installation tips, including cleaning the surface, installing by hand, and tightening with a wrench to 2.5 Nm.

Figure 4: Important Installation Considerations and Torque Guide

3. Operating Principles and Benefits

Spark plugs are critical components in gasoline engines, responsible for igniting the air-fuel mixture in the combustion chamber. Iridium and Platinum spark plugs offer superior performance compared to traditional nickel plugs due to their advanced electrode materials and design.

3.1 Performance Advantages

  • Enhanced Ignition: The fine iridium tip and platinum core allow for a sharper and more focused spark, promoting reliable ignition and efficient combustion.
  • Improved Fuel Economy: More efficient combustion can lead to better fuel utilization.
  • Quicker and Smoother Starts: Consistent and powerful sparks contribute to easier engine starting.
  • Reduced Emissions: Optimized combustion can help minimize harmful exhaust emissions.
Comparison image showing the difference between a nickel spark plug with a large electrode gap and a double platinum/iridium spark plug with a small electrode gap, illustrating cooler vs. hotter operating temperatures and precise spark formation.

Figure 5: Spark Plug Type Comparison

Image highlighting the benefits of A-Premium spark plugs, including quicker and smoother starts, improved engine performance, and better fuel economy.

Figure 6: Benefits of Advanced Spark Plugs

4. Maintenance and Replacement

Regular maintenance and timely replacement of spark plugs are essential for maintaining optimal engine performance and fuel efficiency. The lifespan of spark plugs varies depending on their material and driving conditions.

4.1 Recommended Replacement Schedule

For optimal engine performance and longevity, it is recommended to replace platinum iridium spark plugs at mileage intervals of 80,000 to 100,000 miles.

Image showing a recommended maintenance schedule for different types of spark plugs: Copper/Nickel (20,000-30,000 miles), Platinum + Iridium (40,000-60,000 miles), and Double Iridium (60,000-80,000 miles).

Figure 7: Spark Plug Maintenance Schedule

Always refer to your vehicle's owner's manual for specific maintenance intervals and recommendations.

5. Troubleshooting

If you experience issues such as engine misfires, rough idling, reduced fuel economy, or difficulty starting after spark plug replacement, consider the following:

  • Incorrect Installation: Ensure spark plugs are correctly torqued and not cross-threaded.
  • Incorrect Gap: Verify the spark plug gap is within the specified range for your vehicle.
  • Damaged Plug: A dropped or mishandled spark plug can be damaged, leading to performance issues.
  • Other Engine Issues: Spark plug issues can sometimes mask other underlying engine problems.

If troubleshooting steps do not resolve the issue, it is recommended to consult a qualified automotive technician for diagnosis and repair.

6. Product Specifications

SpecificationValue
ConditionNew
Center Electrode Core MaterialPlatinum
Center Electrode Tip MaterialIridium
Gap Size (IN)0.027"-0.031"
Ground ConfigurationStandard
Ground Electrode Quantity1
Hex Size (IN)5/8
Insulator Height (mm)51.00
Manufacturer Heat Range7
Part NumberDCPR7EIX SOLID
Reach (mm)19
Resistance (ohms)5000 (Note: Feature bullets state 1000, description states 5000. Using 5000 from description as it's more detailed.)
Resistor TypeYes
Seat TypeFlat
Thread Diameter (MM)12.00
OEM Number97637, DCPR7EIX, 6046, DCPR7EIX, 97637, 4983, DCPR7EN10, 1682, DCPR7EGP
Quantity SoldA Set of Four Pieces
Manufacturer Part NumberAPSP225
Item Weight180 g
Country of OriginChina

7. Warranty and Support

A-Premium Spark Plugs come with a one-year quality guarantee. This warranty covers manufacturing defects and ensures the product meets its stated quality standards.

For warranty claims, technical support, or any product-related inquiries, please contact the seller or A-Premium customer service through the platform where the product was purchased.

8. Additional Resources

8.1 Product Videos

Video 1: A-Premium Iridium Spark Plug Overview. This video provides a visual demonstration and overview of the spark plug, highlighting its features and design.

Video 2: Iridium Spark Plug Features and Packaging. This video showcases the packaging and detailed features of an iridium spark plug, including its construction and design elements.

Related Documents - APSP225

Preview 2015 Fiat 500 Abarth User Guide
This user guide provides essential information for operating and maintaining the 2015 Fiat 500 Abarth, covering controls, starting procedures, driving, electronics, maintenance, and emergency procedures.
Preview 2014 FIAT 500 ABARTH User Guide
Comprehensive user guide for the 2014 FIAT 500 ABARTH, covering vehicle features, operation, electronics, maintenance, and emergency procedures. Includes information for both standard and Cabrio models.
Preview 1967-72 Chevrolet Pickup & Suburban Installation Manual - Classic Auto Air
Comprehensive installation manual for the Classic Auto Air Smart Series A/C system designed for 1967-72 Chevrolet Pickup and Suburban models. Includes step-by-step instructions, checklists, and system overview.
Preview Manual de Armado de Motor, Torques y Reglajes: Guía Técnica FRACO para Motores Europeos
Fraco Fábrica Colombiana de Repuestos Automotores S. A. presents a comprehensive technical manual for engine assembly, torques, and adjustments. This guide focuses on European gasoline engines, providing detailed specifications, procedures, and extensive tables for various manufacturers and models, essential for automotive mechanics and technicians.
Preview Simplified Cloning SOP v1.1 - Front Row Ag
Front Row Ag's Simplified Cloning Standard Operating Procedure (SOP) v1.1 provides a concise guide for preparing, taking, plugging, and maintaining plant clones, ensuring efficient propagation.
Preview Volkswagen Cabriolet Tune-Up Guide: Spark Plugs & Air Filter Replacement
A comprehensive DIY guide for Volkswagen Cabriolet owners on performing essential tune-up maintenance, including detailed steps for changing spark plugs and replacing the air filter, along with maintenance schedules and troubleshooting tips.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.