BumbleBee Wearable Milk Collector Instruction Manual

1. Product Overview

The BumbleBee Wearable Milk Collector is an innovative solution for breastfeeding mothers, designed to effortlessly collect breast milk that would otherwise be lost to let-down. This hands-free device fits discreetly inside your bra, allowing for continuous milk collection while you go about your day or nurse on the other side.

• Hands-Free Collection: Continuously suctions up to 90ml (3oz) of milk.
• Milk Saver: Catches let-down, preventing waste and serving as a reusable alternative to nursing pads.
• Ultra-Comfortable Fit: Made from soft, flexible, food-grade silicone, designed to fit discreetly and securely.
• Thoughtful Design: Features a curved opening for easy transfer, a sturdy base to prevent spills, and clear measuring marks.
• Reusable & Reliable: One-piece design, easy to clean, and dishwasher-safe.

2. Setup and Initial Cleaning

Before first use, and after each subsequent use, it is essential to clean and sterilize your BumbleBee Wearable Milk Collector to ensure hygiene and product longevity.

2.1 Cleaning Instructions

1. Disassemble the collector (if applicable, though this is a one-piece design).
2. Wash thoroughly with warm soapy water. Use a soft brush if necessary to reach all areas.
3. Rinse well with clean water.
4. Sterilize by boiling in water for 3-5 minutes, using a steam sterilizer, or placing in the top rack of a dishwasher.
5. Allow to air dry completely before storage or next use.

3. Operating Instructions

The BumbleBee Wearable Milk Collector is designed for ease of use, allowing you to collect milk hands-free.

3.1 How to Use

1. Prepare the Collector: Ensure the collector is clean and dry.
2. Positioning: Gently press the back of the silicone collector to expel air, then place it on your breast. Ensure your nipple is centered within the opening.
3. Create Suction: Adjust the suction by pressing the collector against your breast with varying degrees of force until it feels secure and comfortable. The adjustable suction helps keep it in place.
4. Wear in Bra: Always wear the collector inside your bra to keep it secure and discreet.
5. Collection: Wear the collector on the breast opposite to the one you are nursing from to collect let-down, or wear two at a time inside your bra to collect leakage throughout the day.
6. Transfer Milk: Once milk is collected, use the curved opening at the top to easily transfer the milk into a storage bottle or bag. The sturdy bottom allows it to stand upright, preventing accidental spills.

4. Maintenance and Care

Proper maintenance ensures the longevity and hygiene of your BumbleBee Wearable Milk Collector.

• Daily Cleaning: Clean after each use following the instructions in Section 2.1.
• Sterilization: Regular sterilization is recommended, especially for newborns.
• Storage: Store in a clean, dry place away from direct sunlight and extreme temperatures.
• Inspection: Periodically inspect the silicone for any signs of wear, tears, or damage. Discontinue use if any damage is observed.

5. Troubleshooting

If you encounter any issues with your BumbleBee Wearable Milk Collector, refer to the following common solutions:

6. Product Specifications

7. Warranty and Support

For information regarding product warranty, returns, or customer support, please refer to the product packaging or visit the official BumbleBee website. Contact details for support are typically provided with your purchase.