1. Introduction
The Wasserstein Doorbell Chime provides an audible alert for your Blink Video Doorbell, ensuring you are notified when someone is at your door without needing to monitor your smartphone constantly. This device enhances your home's notification system by offering customizable tones and LED indicators.
Image 1: Overview of the Wasserstein Doorbell Chime system, including the Blink Video Doorbell, the plug-in Chime Receiver, and the wired Chime Transmitter.
2. Package Contents
- 1x Wasserstein Doorbell Chime Receiver
- 1x Wasserstein Doorbell Chime Transmitter
- 1x Connection Cable (pre-installed or included)
- User Manual
3. Setup and Installation
3.1 Transmitter Wiring
The Chime Transmitter requires a wired connection to your Blink Video Doorbell. Use the provided cable for this connection.
- Ensure your Blink Video Doorbell is powered off or batteries are removed before proceeding.
- Locate the wiring terminals on your Blink Video Doorbell.
- Connect the pre-installed cable from the Wasserstein Chime Transmitter to the appropriate terminals on your Blink Video Doorbell. Refer to your Blink Video Doorbell's manual for specific wiring instructions if needed.
- Secure the Chime Transmitter near the Blink Video Doorbell.
Image 2: The Chime Transmitter linked to the Blink Video Doorbell using the included cable.
3.2 Pairing the Chime Receiver and Transmitter
The transmitter and receiver are typically pre-paired. If re-pairing is necessary, follow these steps:
- Plug the Chime Receiver into a standard electrical outlet.
- On the Chime Receiver, press and hold the brightness buttons (usually marked with '+' and '-' or sun icons) simultaneously for 3 seconds until an indicator light flashes.
- Within 30 seconds, press the doorbell button on your Blink Video Doorbell. The Chime Receiver should sound, indicating successful pairing.
Image 3: Visual representation of the wireless pairing process between the Chime Receiver and the Blink Video Doorbell via the wired Transmitter.
3.3 Multiple Receivers
For larger homes, you can connect up to 5 Chime Receivers to one Chime Transmitter. Repeat the pairing process (Section 3.2) for each additional receiver.
Image 4: Example of connecting multiple Chime Receivers to a single Blink Video Doorbell system for extended coverage.
4. Operating Instructions
4.1 Customizing Tones and LED Colors
The Chime Receiver offers 7 distinct tones and 4 LED color options for personalization.
- Changing Tones: Press the 'Music Note' button on the Chime Receiver to cycle through the available melodies.
- Changing LED Colors: Press the 'Color Palette' button to select your preferred LED color.
- Adjusting Volume: Use the '+' and '-' buttons to increase or decrease the chime volume.
Image 5: The Chime Receiver highlighting the availability of 7 melody choices.
4.2 Silent Mode with Flashing LED
For situations where an audible chime is not desired, the receiver can be set to silent mode, providing a visual alert via its flashing LED.
Image 6: The Chime Receiver operating in silent mode, using a flashing LED for notification.
5. Compatibility
This Wasserstein Doorbell Chime is designed for full compatibility with the Blink Video Doorbell.
It is not compatible with other doorbell systems such as Nest Doorbell (battery), Nest Doorbell (wired, 2nd gen), or Ring Video Doorbell 3 Plus.
Image 7: Visual guide to product compatibility.
6. Specifications
| Manufacturer | Wasserstein |
| Item Weight | 11.3 ounces |
| Package Dimensions | 6.61 x 5.35 x 1.65 inches |
| Batteries Included? | No |
| Batteries Required? | No (for receiver), Yes (for transmitter - AAA, not included) |
| ASIN | B0CJF3YS8J |
Image 8: Physical dimensions of the Chime Receiver and Chime Transmitter.
7. Troubleshooting
- Chime not sounding:
- Ensure the Chime Receiver is plugged into a working electrical outlet.
- Verify the Chime Transmitter is correctly wired to the Blink Video Doorbell.
- Check if the transmitter and receiver are properly paired (refer to Section 3.2).
- Confirm that the Blink Video Doorbell has sufficient battery power.
- Ensure the chime volume is not set to minimum or silent mode (unless visual alert is desired).
- Short range or intermittent connection:
- Move the Chime Receiver closer to the Blink Video Doorbell and Transmitter.
- Avoid placing the receiver near large metal objects or other electronic devices that may cause interference.
- LED not flashing in silent mode:
- Ensure silent mode is correctly activated.
- Check for any obstructions blocking the LED light.
8. Maintenance
To ensure optimal performance and longevity of your Wasserstein Doorbell Chime:
- Keep the devices clean by wiping them with a soft, dry cloth. Avoid using liquid cleaners or aerosols.
- Ensure the Chime Receiver is plugged into a stable power source.
- Protect the devices from extreme temperatures and direct moisture.
- Replace AAA batteries in the transmitter as needed to maintain consistent operation.
9. Warranty and Support
For warranty information or technical support, please visit the official Wasserstein website or contact their customer service. You can also find more information on the Wasserstein Store on Amazon.
