1. Introduction
The Biltwell GringoSV, also known as the Biltwell Classic Full Face with shield and vents, reenergizes the classic motorcycle aesthetic. This helmet offers world-class comfort, function, and style. Our new ECE 22.06 compliant helmets are available in three shell sizes, providing a more accurate and comfortable fit, especially for Medium and XXL sizes. Please refer to the revised sizing chart before ordering.
Image: Side view of the Biltwell Gringo SV helmet in flat black.
2. Key Features
- Injection-molded ABS outer shell: Lightweight and highly resistant to impacts.
- Evolutionary Gringo S shell styling: Features front, side, and rear vent ports for improved interior airflow, moisture dissipation, and cooling.
- New Dual Density expanded polystyrene (EPS) internal safety shell: Absorbs and dissipates impact energy without compromising comfort.
- Adjustable vents: Located above the eye port to regulate internal airflow.
- Molded urethane chin bar pad: Dissipates energy during front impact.
- Chin strap: Features brushed fleece Lycra touchpoints for comfort, and a D-ring retention system with red quick-release pull tab.
- CE-certified, injection-molded polycarbonate shield: Features anti-fog and anti-scratch treatments for durability and safety.
- Rugged hinge hardware: With robust detents allows riding with the shield open at slow speeds for increased airflow.
- Anodized aluminum washers and stainless-steel hinge screws: Can be swapped with different colors and finishes (available separately).
- Removable/replaceable comfort liner and cheek pads: Constructed with fleece Lycra and open-cell foam padding to absorb and evaporate perspiration.
- New BioFoam head form panel and ventilated polyester padding: Maximize airflow around your head.
- Molded EPS ear pockets: Fit select aftermarket audio accessories.
- Certifications: US DOT FMVSS No. 218 compliant / ECE R22.06 certified.
3. Setup and Fitment
3.1 Unpacking and Initial Inspection
Carefully remove the helmet from its packaging. Inspect the helmet for any visible damage or defects. Ensure all components, including the shield and chin strap, are securely attached and functional before first use.
3.2 Achieving the Correct Fit
A proper fit is crucial for safety and comfort. The Gringo SV helmet is designed with three shell sizes to provide a more accurate fit across various head sizes. The internal comfort liner and cheek pads are removable and replaceable, allowing for fine-tuning of the fit.
- Cheek Pad Customization: All cheek pads fit all helmet sizes and range from 5mm (looser fit) to 29mm (tighter fit). This allows for precise adjustment to your facial structure.
- Liner Replacement: Replaceable liners are helmet size-specific. They can be swapped out to maintain freshness and hygiene.
Image: Sizing chart for Biltwell Gringo and Gringo SV helmets, showing cheek pad and liner options.
4. Operating Instructions
4.1 Ventilation Control
The Gringo SV helmet features four vents: two at the front and two at the top. The top vents can be opened and closed to regulate airflow. Additionally, there is one exhaust vent at the rear to facilitate air circulation over the top of your head and out the back, improving comfort and reducing moisture buildup.
4.2 Shield Operation
The CE-certified polycarbonate shield is equipped with an improved locking mechanism, similar to the Biltwell Lane Splitter. This mechanism ensures the shield remains securely closed during rides. The rugged hinge hardware allows the shield to be kept open at slow speeds for increased airflow.
Video: Official Biltwell Gringo SV Motorcycle Helmet overview, demonstrating features like ventilation and shield operation.
5. Maintenance
5.1 Cleaning the Helmet
To clean the exterior of your helmet, use a soft cloth dampened with mild soap and water. Avoid harsh chemicals or abrasive cleaners, as these can damage the finish and protective coatings. For the shield, use a dedicated helmet shield cleaner or mild soap and water, and dry with a soft, lint-free cloth.
5.2 Liner and Cheek Pad Care
The comfort liner and cheek pads are removable for cleaning. Hand wash them with mild soap and cold water, then air dry completely before reinserting them into the helmet. Regular cleaning helps maintain hygiene and extends the life of your helmet's interior.
6. Troubleshooting
6.1 Fogging Shield
If your shield fogs up, ensure the adjustable top vents are open to increase airflow. The shield also features an anti-fog treatment, but in extreme conditions, additional anti-fog solutions may be applied.
6.2 Loose Fit
If the helmet feels too loose, consider replacing the cheek pads with a thicker size (up to 29mm) to achieve a more snug fit. Ensure the chin strap is properly adjusted and secured using the double D-ring fastener.
6.3 Excessive Noise
Excessive wind noise can sometimes be reduced by ensuring the shield is fully closed and locked. Check for any gaps around the shield's seal. If issues persist, consult the manufacturer's support.
7. Specifications
| Feature | Detail |
|---|---|
| Certificate Type | US DOT FMVSS No. 218 compliant / ECE R22.06 certified |
| Finish Type | Matte |
| Number Of Vents | 5 (4 intake, 1 exhaust) |
| Shell Type | Hard (Injection-molded ABS outer shell) |
| Shape | Round |
| Closure Type | Double Ring (D-ring) |
| Model Name | Gringo SV - Classic Full Face With Shield and Vents |
| UPC | 810084852132 |
| Item Package Dimensions L x W x H | 14.75 x 11.5 x 11.2 inches |
| Package Weight | 2.18 Kilograms |
| Size | Large |
| Color | Flat Black |
| Material | Plastic (ABS) |
8. Warranty and Support
8.1 Warranty Information
The Biltwell Gringo SV helmet comes with a Limited Two-Year Warranty. Please retain your proof of purchase for warranty claims.
8.2 Customer Support
For any questions regarding fit, maintenance, or other inquiries, please contact Biltwell customer service. You can find more information and contact details on the official Biltwell store page: