FAILUN 01
Contents
FAILUN Bathtub Splash Guard
User Manual
Introduction
The FAILUN Bathtub Splash Guard is designed to effectively prevent water from splashing out of your bathtub or shower area, keeping your bathroom floor dry and clean. This product provides a simple yet effective solution to manage water containment, enhancing safety and reducing cleaning efforts.

Image: Two FAILUN Bathtub Splash Guards, showing their design and how they fit into a bathtub corner.
Product Features
- Durable Acrylic Material: Constructed from high-quality, thick acrylic for long-lasting use.
- Adjustable Angle: The splash guard can be adjusted from 90° to 105° to fit various bathtub and wall angles.
- Strong Adhesive Base: Features a powerful, trace-free nano rubber adhesive for secure installation and easy removal without residue.
- Effective Water Blocking: Enlarged acrylic baffle area designed to block most water flow, reducing splash and slip hazards.
- Versatile Application: Suitable for use in bathtubs, showers, kitchen sinks, and washroom sinks.

Image: Diagram illustrating key features including the silicone base, adjustable angle, and acrylic baffle.

Image: Illustration of the large acrylic baffle, highlighting its effectiveness in blocking water and ease of cleaning.

Image: Close-up view of the high-quality silicone base, showing how it fits snugly against the wall and basin corners to prevent splashes.
Package Contents
Your FAILUN Bathtub Splash Guard package includes:
- 2 x FAILUN Bathtub Splash Guards
- 1 x Caulking (sealant)
- 1 x Instruction Manual
Setup and Installation
Follow these steps for proper installation to ensure optimal performance and water containment:
- Prepare the Surface: Ensure the wall and bathtub edges where the splash guard will be installed are thoroughly clean and dry. This is crucial for the adhesive to bond effectively and maintain a long-lasting waterproof seal.
- Peel Adhesive (First Side): Carefully peel off the protective film from the adhesive strip on one side of the splash guard.
- Position and Press (First Side): Align the splash guard with the wall and firmly press the adhesive side against the wall.
- Peel Adhesive (Second Side): While holding the splash guard in place, peel off the remaining protective film from the adhesive strip on the bottom side.
- Press Firmly (Second Side): Press the bottom of the splash guard firmly onto the bathtub edge.
- Adjust Angle: Adjust the position of the acrylic baffle to achieve the desired angle (between 90° and 105°) to best fit your bathtub and wall configuration.
- Curing Time: Allow at least 15 minutes for the adhesive to set before using the bathtub or shower. For best results, it is recommended to wait 24 hours before exposing to water.

Image: Step-by-step visual guide for installing the FAILUN Bathtub Splash Guard, from cleaning the surface to final adjustment.
Important Note: The included caulking can be used to fill any small gaps or spaces around the splash guard for an even more secure and waterproof seal, if necessary.
Operating and Usage
Once installed, the FAILUN Bathtub Splash Guard works automatically to prevent water from escaping the shower or bathtub area. Its primary function is to bridge the gap between your shower curtain or shower door and the wall, directing water back into the tub.
The splash guard is versatile and can be applied in various scenarios:
- Bathroom Bathtub: Ideal for preventing splashes during showers or baths.
- Washroom Sink: Can be used to contain water splashes around bathroom sinks.
- Kitchen Sink: Effective in preventing water overflow and splashes around kitchen sinks.

Image: Examples of where the FAILUN splash guard can be used, including bathtubs, washroom sinks, and kitchen sinks.
Maintenance
To ensure the longevity and hygiene of your FAILUN Bathtub Splash Guard, regular cleaning is recommended. The acrylic material is designed for easy maintenance.
- Routine Cleaning: Wipe down the splash guard with a soft cloth and mild soap or a non-abrasive bathroom cleaner.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, scouring pads, or strong chemical solvents, as these can damage the acrylic surface or the adhesive.
- Check Seal: Periodically inspect the adhesive seal for any signs of wear or detachment. Reapply caulking if necessary to maintain a watertight barrier.
Troubleshooting
If you encounter issues with your FAILUN Bathtub Splash Guard, consider the following:
- Water Leakage:
- Ensure the installation surface was clean and dry before application.
- Verify that the adhesive is firmly pressed against both the wall and the bathtub edge.
- Check if the angle of the splash guard is correctly adjusted to minimize gaps.
- Apply the included caulking to any visible gaps or seams for an enhanced seal.
- Adhesive Not Holding:
- Re-clean and dry the surface thoroughly. Residue or moisture can prevent proper adhesion.
- Ensure sufficient pressure was applied during installation.
- Allow the recommended curing time (15 minutes minimum, 24 hours for best results) before exposing to water.
- Product Does Not Fit Bathtub:
Please note that not all bathtub designs are compatible with this splash guard. This product is designed for bathtubs with a flat, sufficiently wide edge for the adhesive to adhere to. It may not be suitable for:
- Bathtubs with a contacting edge that is too narrow.
- Bathtubs with irregular shapes or curves where a flat surface is not available.
- Bathtubs with an unflat or uneven edge.

Image: Examples of bathtub types that may not be suitable for this splash guard, including those with narrow edges, irregular shapes, or uneven surfaces.
Specifications
| Brand | FAILUN |
| Model Number | 01 |
| Product Dimensions (L x W x H) | 25.4 x 20.32 x 1.52 cm (10 x 8 x 0.6 inches) |
| Weight | 472 grams (1.04 lbs) |
| Color | White |
| Material | Acrylic |
| Finish Type | Lacquered |
| Installation Method | Wall Mount (Adhesive) |
| Shape | L-shaped, Rectangular |
| UPC | 745431809555 |
Warranty and Support
Information regarding product warranty and customer support is not available in this manual. Please refer to the product packaging or the retailer's website for details on warranty coverage and how to contact customer support for assistance.
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.