1. Important Safety Information
Please read and understand all instructions before beginning assembly and use. Failure to follow these instructions may result in serious injury.
- Adult Assembly Required: This product contains small parts. Keep children away during assembly.
- Weight Limit: Do not exceed the recommended weight capacity for a Queen size bed frame. Distribute weight evenly.
- Regular Inspection: Periodically check all bolts and screws to ensure they are tight and secure. Re-tighten as necessary.
- Placement: Place the bed on a flat, level surface. Avoid placing near windows where cords could pose a strangulation hazard to children.
- No Jumping: Do not allow children to jump on the bed.
- Ventilation: Ensure adequate ventilation around the bed.
2. Package Contents
Verify that all components are present before starting assembly. If any parts are missing or damaged, do not proceed with assembly. Contact customer support immediately.
- Headboard and Footboard Panels
- Side Rails (Left and Right)
- Roof Frame Components (A-frame pieces)
- Bed Slats
- Center Support Beam (if applicable)
- Hardware Pack (screws, bolts, nuts, Allen wrench)
- Assembly Instructions Manual
Image: An overview of the Flieks Queen Size Wooden House Bed Frame components before assembly, showing the main structural pieces.
3. Assembly Instructions
Follow these steps carefully for proper assembly. Two adults are recommended for assembly.
- Prepare the Area: Clear a spacious area for assembly. Lay out all components and hardware.
- Assemble the Headboard and Footboard: Attach any vertical slats or decorative elements to the headboard and footboard panels using the provided hardware.
- Connect Side Rails: Attach the side rails to the headboard and footboard using the appropriate bolts and nuts. Ensure all connections are secure but do not fully tighten yet.
- Install Center Support (if applicable): If your frame includes a center support beam, install it now according to the diagrams.
- Place Bed Slats: Lay the bed slats across the side rails. Secure them in place using the pre-drilled holes and screws. Ensure even spacing.
- Assemble the House Roof Frame: Connect the A-frame pieces to form the house structure. Attach these to the main bed frame posts.
- Final Tightening: Once all components are in place, go back and securely tighten all bolts and screws. Do not overtighten.
- Inspect: Ensure the bed frame is stable and all parts are correctly assembled before placing a mattress on it.
Image: A view of the Flieks Queen Size Wooden House Bed Frame during assembly, illustrating the frame's structure and slat placement.
4. Operating Instructions (Usage)
This Flieks Queen Size Wooden House Bed Frame is designed for comfortable and safe sleeping. It does not require a box spring.
- Mattress Placement: Place your Queen size mattress directly onto the bed slats.
- Decoration: The house-shaped design allows for creative decoration, such as hanging lightweight fabrics, lights, or banners to personalize the space. Ensure any decorations are securely attached and do not pose a hazard.
- Ventilation: Ensure proper air circulation around the mattress to prevent moisture buildup.
5. Maintenance and Care
Proper care will extend the life and appearance of your bed frame.
- Cleaning: Wipe the frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, as they may damage the finish.
- Hardware Check: Periodically (every 3-6 months) check all bolts, screws, and connections. Re-tighten any loose hardware to maintain stability.
- Avoid Moisture: Protect the wooden frame from excessive moisture and direct sunlight to prevent warping or fading.
- Moving the Bed: When moving the bed, lift it rather than dragging it to prevent damage to the frame and floor.
6. Troubleshooting
If you encounter any issues, refer to the following common solutions:
- Wobbling Frame: Ensure all bolts and screws are securely tightened. Check that the bed is on a level surface.
- Squeaking Noises: Squeaking can often be resolved by re-tightening all hardware. If the issue persists, check for any friction points between wood components.
- Missing Parts: If you find any parts missing upon unboxing, do not proceed with assembly. Contact Flieks customer support with your purchase details.
- Difficulty Assembling: Review the assembly instructions carefully. Ensure you are using the correct hardware for each step. If needed, disassemble and re-start.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Flieks |
| Model Number | WF296086AAK-MZJ |
| Size | Queen |
| Color | White |
| Material | Pine Wood + MDF |
| Product Dimensions (L x W x H) | 82.7" x 63" x 70.9" |
| Item Weight | 61.5 pounds |
| Assembly Required | Yes |
| Spring Box | Not Needed |
| UPC | 196986945241 |
Image: Dimensional drawing of the Flieks Queen Size Wooden House Bed Frame, indicating length, width, and height measurements.
8. Warranty and Support
For warranty information, please refer to the terms and conditions provided at the time of purchase or contact Flieks customer support directly. Keep your proof of purchase for any warranty claims.
If you require assistance with assembly, have questions about product use, or need to report missing/damaged parts, please contact Flieks customer service through the retailer where the product was purchased or via the official Flieks website.
