1. Introduction
This manual provides essential information for the proper setup, operation, and maintenance of your Ice-Watch ICE digit retro digital watch. Please read these instructions carefully to ensure optimal performance and longevity of your timepiece.
Image 1.1: Front view of the Ice-Watch ICE digit retro Black Silver Digital Watch, displaying the digital time, day, and date.
2. Product Features
- Design: The ICE digit retro watch combines a classic digital display with a modern design, suitable for various occasions.
- Case and Strap: Features a durable silicone case (32mm small size) and a comfortable plastic strap.
- Water Resistance: Water resistant up to 10 ATM (100 meters / 330 feet), suitable for swimming and water sports, but not for diving.
- Functions: Includes time display, date, day of the week, alarm, stopwatch, and backlight.
- Packaging: Delivered with a presentation box.
Image 2.1: Angled view of the Ice-Watch ICE digit retro Black Silver Digital Watch, highlighting the gold-tone case and black strap.
3. Setup
3.1 Button Identification
Familiarize yourself with the four buttons on your watch:
- RESET (Top Left): Used to reset values or return to a previous setting.
- ST/STP (Top Right): Used to start/stop functions like stopwatch or timer, and to adjust settings.
- MODE (Bottom Left): Used to cycle through different watch modes (Time, Alarm, Stopwatch, Timer).
- LIGHT (Bottom Right): Activates the backlight for illumination.
Image 3.1: Side view of the watch, showing the two control buttons on the left side of the case.
3.2 Setting Time and Date
- From the normal time display, press the MODE button repeatedly until the seconds begin to flash. This indicates you are in time setting mode.
- Press the ST/STP button to cycle through the settings: seconds, hours, minutes, month, date, day of the week.
- Use the RESET button to adjust the flashing value. Hold RESET to change values quickly.
- Once all settings are correct, press the MODE button to exit the setting mode and return to the normal time display.
3.3 Setting the Alarm
- From the normal time display, press the MODE button once to enter Alarm Mode. The alarm time will be displayed.
- Press the ST/STP button to select the hour or minute setting. The selected value will flash.
- Use the RESET button to adjust the flashing hour or minute.
- Press MODE to exit Alarm Setting Mode.
- To activate/deactivate the alarm, press the RESET button while in Alarm Mode. An alarm icon will appear/disappear on the display.
4. Operating
4.1 Mode Selection
Press the MODE button to cycle through the following functions:
- Time Display: Shows current time, day, and date.
- Alarm: Displays and allows setting of the alarm time.
- Stopwatch: Measures elapsed time.
- Timer: Countdown timer function.
4.2 Stopwatch Function
- Press MODE until you reach the Stopwatch Mode (usually indicated by '00:00:00').
- Press ST/STP to start the stopwatch.
- Press ST/STP again to stop the stopwatch.
- Press RESET to clear the stopwatch to zero.
4.3 Timer Function
- Press MODE until you reach the Timer Mode.
- To set the timer, press and hold ST/STP until the timer digits flash.
- Use MODE to select hours, minutes, or seconds. Use RESET to adjust the flashing value.
- Press ST/STP to start the countdown.
- Press ST/STP again to pause/resume the countdown.
- When the timer reaches zero, an alarm will sound. Press any button to stop the alarm.
4.4 Backlight
Press the LIGHT button (bottom right) to illuminate the display for a few seconds, allowing you to read the time in low-light conditions.
5. Maintenance
5.1 Water Resistance
Your Ice-Watch ICE digit retro is water resistant up to 10 ATM (100 meters / 330 feet). This means it is suitable for everyday use, showering, bathing, swimming, and snorkeling. It is not suitable for high-impact water sports or diving. Do not operate buttons while the watch is wet or submerged.
5.2 Cleaning
To clean your watch, wipe it with a soft, damp cloth. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the case and strap materials.
5.3 Battery Replacement
The watch is powered by one Lithium metal battery (included). When the display becomes dim or functions become erratic, it may be time to replace the battery. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.
Image 5.1: Back view of the watch, showing the stainless steel case back with model number and water resistance information.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is blank or dim | Low battery | Replace the battery. |
| Time is incorrect | Time not set correctly or accidental button press. | Refer to Section 3.2 to reset the time. |
| Buttons are unresponsive | Watch may be in a locked mode or internal malfunction. | Try pressing all buttons to see if any respond. If not, a battery replacement might resolve it. If the issue persists, contact customer support. |
| Water inside the watch | Water resistance compromised (e.g., buttons pressed underwater, extreme pressure). | Immediately take the watch to a professional watch repair service to prevent further damage. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | 022064 |
| ASIN | B0CJBZ7RR2 |
| Case Material | Silicone |
| Strap Material | Plastic |
| Case Size | 32mm (Small) |
| Water Resistance | 10 ATM (100 meters / 330 feet) |
| Battery Type | 1 Lithium metal (included) |
| Package Dimensions | 11 x 7.4 x 7.3 cm |
| Item Weight | 28 grams |
| Country of Origin | China |
8. Warranty and Support
Ice-Watch products are manufactured to high-quality standards and are covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase for specific terms and conditions, including the warranty period and how to make a claim.
For further assistance, product support, or to locate an authorized service center, please visit the official Ice-Watch website or contact their customer service department. Keep your proof of purchase for warranty purposes.