Pefecon Blink Outdoor 4 Camera Mount and Weatherproof Case with Sync Module 2 Mount Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation and use of the Pefecon camera mount and weatherproof case, designed for Blink Outdoor 4th Generation and Blink Outdoor 3rd Generation cameras. It also covers the installation of the included wall mount for the Blink Sync Module 2. These accessories enhance the flexibility and protection of your Blink cameras.

Important Note: Blink cameras and Sync Modules are not included with this product.

Image 1: Overview of the Pefecon Blink Outdoor 4 Camera Mount and Weatherproof Case with Sync Module 2 Mount. This image displays two black weatherproof cases, two adjustable camera mounts, and one white wall mount for the Blink Sync Module 2.

2. Compatibility

The Pefecon camera mounts and weatherproof cases are specifically designed for:

• Blink Outdoor 4 (4th Generation)
• Blink Outdoor (3rd Generation)

These accessories are NOT compatible with Blink XT, Blink XT2, or Blink Mini cameras.

The Sync Module wall mount is compatible with:

• Blink Sync Module 2
• Blink Sync Module Core
• Blink Sync Module XR

Image 2: Compatibility chart illustrating which Blink camera models (Outdoor 4th Gen, Outdoor 3rd Gen) and Sync Modules (Sync Module XR, Sync Module 2, Sync Module Core) are compatible with the mounts and cases. Incompatible models (Blink XT/XT2, Blink Mini) are also shown.

3. Package Contents

Please verify that all items listed below are included in your package:

• 2 x Weatherproof Plastic Protective Cases (for Blink Outdoor cameras)
• 2 x Blink Camera Mounts (adjustable)
• 1 x Blink Sync Module Wall Mount
• 1 x Accessory Screw Set (for mounting)

Image 3: Visual representation of the package contents, including two camera cases, two camera mounts, one Sync Module mount, and a set of screws and anchors.

4. Installation

4.1. Blink Camera Case and Mount Installation

1. Insert Camera into Case: Gently slide your Blink Outdoor camera into the plastic weatherproof case. Ensure it fits snugly.
2. Secure Case Cover: Place one side of the case cover into the box, then snap the other side of the cover securely into place.
3. Fix Mount to Surface: Using the included screws and anchors, securely fix the camera mount base to your desired wall or ceiling surface.
4. Attach Camera Assembly: Screw the camera (inside its case) onto the fixed mount.

Image 4: Step-by-step visual guide for installing the Blink camera into its weatherproof case and then attaching the assembly to the wall mount.

Image 5: A Blink camera, enclosed in the Pefecon weatherproof case, securely mounted to a wall using the adjustable bracket.

4.2. Blink Sync Module Wall Mount Installation

The Sync Module wall mount is designed for easy installation without additional cables, helping to keep your environment tidy.

1. Locate an Outlet: Choose a convenient power outlet where you wish to mount your Blink Sync Module.
2. Insert Sync Module: Place your Blink Sync Module into the wall mount.
3. Plug In: Plug the entire assembly directly into the power outlet. The mount is designed to hold the Sync Module securely against the wall.

Image 6: Various examples of the Blink Sync Module 2 wall mount installed in different indoor settings, demonstrating its space-saving and cable-free design.

5. Camera Angle Adjustment

The camera mount offers significant flexibility for optimal camera positioning:

• 360-Degree Rotation: The mount allows for a full 360-degree rotation, enabling you to point your camera in any horizontal direction.
• 90-Degree Tilt: You can also tilt the camera up or down by 90 degrees to achieve the perfect vertical viewing angle.

To adjust the camera orientation, loosen the adjustment knob on the mount, position the camera as desired, and then tighten the knob to secure it in place. It is recommended to adjust the angle before final mounting to determine the best position for installation screws.

Image 7: Diagram illustrating the 360-degree rotation and 90-degree tilt capabilities of the camera mount, showing how to achieve various viewing angles.

6. Maintenance

The weatherproof cases are constructed from premium ABS plastic and aluminum, designed to withstand various outdoor conditions.

• Cleaning: To clean the cases and mounts, simply wipe them with a damp cloth. Avoid using harsh chemicals or abrasive cleaners that could damage the material.
• Weather Resistance: The cases provide full coverage protection for your Blink cameras against elements like rain and harsh storms. Regular visual inspection for any debris accumulation is recommended.

Image 8: A visual demonstration of the weatherproof case protecting a Blink camera during rainfall, highlighting its durability against outdoor elements.

7. Troubleshooting

If you encounter any issues during installation or use, please consider the following:

• Mount Stability: Ensure all screws are tightened securely. If mounting on drywall, use appropriate anchors.
• Camera Fit: Verify that your Blink camera model is compatible with the case (Blink Outdoor 4th Gen or 3rd Gen).
• Angle Adjustment: If the camera does not hold its position, ensure the adjustment knob is fully tightened after positioning.

For further assistance, please refer to the contact information provided in the Warranty and Support section.

8. Specifications

9. Warranty and Support

For any questions regarding product warranty, technical support, or customer service, please contact the manufacturer, Pefecon, through their official channels or the retailer from whom the product was purchased. Please retain your proof of purchase for warranty claims.