1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your INNOVV ThirdEYE Motorcycle Blind Spot System. Please read this manual thoroughly before using the product to ensure proper function and safety.
The INNOVV ThirdEYE system is designed to enhance motorcycle safety by detecting vehicles in your blind spots and alerting you through visual and auditory signals. It utilizes advanced radar technology to provide real-time warnings, helping riders react to rapidly changing road conditions.
2. Product Overview
2.1 Package Contents
Upon opening the package, verify that all components are present:
- Radar Detector
- Watch Alert Display (Mirror Version)
- Instruction Manual
- Brackets Package (various mounting hardware)
Image: The INNOVV ThirdEYE system components, including the radar detector, alert displays, and mounting hardware, shown alongside the product packaging.
2.2 Key Features
- Blind Spot Detection (BSD): Alerts riders to potential hazards in blind spots.
- Voice and LED Indicators: Provides timely audio and visual warnings.
- High Precision Radar: Utilizes 77-79Ghz sensor for accurate detection, velocity measurement, and range resolution.
- Wide Field Detection: Horizontal detection angle up to 150°, covering a maximum distance of 50 meters.
- Multi-Target Detection: Capable of detecting up to 64 targets simultaneously.
- All-Weather Durability: IP67 waterproof and dustproof rating, operational from -40℃ to 80℃.
- Automatic Operation: System turns on and off with the motorcycle ignition.
3. Setup and Installation
The INNOVV ThirdEYE system is designed for straightforward installation. Professional installation is recommended if you are unfamiliar with motorcycle electrical systems.
3.1 Component Placement
- Radar Detector: Mount the radar detector at the rear of the motorcycle, ensuring an unobstructed view of the rear and side areas. The included brackets are designed to conform to various motorcycle shapes.
- LED Indicators: Install the LED indicators in a position easily visible to the rider, typically near the mirrors or on the dashboard.
- Control Box: Secure the control box in a protected location, such as under the seat, ensuring it is away from direct heat and moisture.
Image: An illustration demonstrating the placement of the radar detector, control box, and LED indicators on a motorcycle for easy installation.
3.2 Wiring Connections
- Connect the radar detector and LED indicators to the control box according to the wiring diagram provided in the full installation guide.
- Connect the power cable from the control box to the motorcycle's electrical system. Typically, this involves connecting to an ACC (Accessory) fuse for switched power and directly to the battery for ground.
- Ensure all connections are secure and properly insulated to prevent short circuits and water ingress.
Note: Refer to the detailed wiring diagram included in your product packaging for specific connection points for your motorcycle model.
4. Operating Instructions
The INNOVV ThirdEYE system operates automatically once installed and powered correctly.
4.1 Automatic Activation
The system will power on automatically when the motorcycle's ignition is turned on and power is supplied to the control box. It will power off when the ignition is turned off.
Image: A motorcycle dashboard illustrating the automatic activation of the blind spot detection system with the ignition.
4.2 Blind Spot Alerts
When a vehicle enters your blind spot, the system will provide alerts:
- LED Indicator Warning: The LED indicators will illuminate, typically red, to visually alert you to the presence of a vehicle.
- Audio Warning: An audible alert will sound to provide an additional warning.
Image: A close-up view of the LED indicator on a motorcycle mirror, showing both visual and audio alert functions. The audio function can be toggled by pressing the icon.
You can typically turn the audio alert function on or off by pressing the audio icon located on the display unit.
5. Maintenance
To ensure the longevity and optimal performance of your INNOVV ThirdEYE system, follow these maintenance guidelines:
- Regular Cleaning: Keep the radar detector and LED indicators clean from dirt, mud, and debris. Use a soft, damp cloth for cleaning. Avoid abrasive cleaners.
- Cable Inspection: Periodically inspect all cables and connections for signs of wear, damage, or corrosion. Ensure they remain securely fastened.
- Waterproof Integrity: While the system is IP67 waterproof, avoid directing high-pressure water jets directly at the components during washing.
- Environmental Protection: The system is designed for extreme temperatures, but storing the motorcycle in a sheltered environment when not in use can further extend its lifespan.
6. Troubleshooting
If you encounter issues with your INNOVV ThirdEYE system, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| System does not power on. |
|
|
| No alerts when vehicles are in blind spot. |
|
|
| False alerts. |
|
|
If the problem persists after attempting these solutions, please contact INNOVV customer support for further assistance.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | INNOVV |
| Model Number | ThirdEYE |
| Radar Frequency | 77-79 GHz |
| Detection Angle (Horizontal) | Up to 150° |
| Maximum Detection Range | 50 Meters |
| Target Detection Capacity | Up to 64 targets simultaneously |
| Waterproof Rating | IP67 |
| Operating Temperature | -40℃ to 80℃ |
| Voltage | 12 Volts |
| Item Weight | 1.12 pounds |
| Compatible Devices | Motorcycles, Bicycles, E-bikes |
Image: Detailed dimensions of the INNOVV ThirdEYE radar unit, LED indicators, and control box.
8. Warranty and Support
Information regarding product warranty and customer support was not available in the provided data. Please refer to the product packaging or the official INNOVV website for details on warranty coverage and how to contact customer support for technical assistance or service inquiries.
