Introduction
This manual provides essential instructions for the assembly, safe use, and maintenance of your ECR4Kids 24in x 24in Hardwood Table with 20in Legs and Two 10in Chairs. Please read all instructions carefully before assembly and use to ensure proper function and safety.
The ECR4Kids table and chair set is designed for children, providing a dedicated space for activities. It is constructed from durable hardwood with a honey finish.
Safety Information
- Adult Assembly Required: This product requires adult assembly and supervision during use.
- Supervision: Always supervise children when they are using the table and chairs.
- Weight Capacity: Adhere to the recommended weight capacities for the chairs to prevent damage or injury. Refer to the Specifications section for details.
- Stability: Ensure the table and chairs are placed on a flat, stable surface.
- Maintenance: Regularly check all fasteners to ensure they are tight. Loose fasteners can compromise stability and safety.
- Certifications: This children's furniture is GREENGUARD [GOLD] Certified for low VOCs, CPSIA compliant, and meets the requirements of ANSI/BIFMA X6.1 Educational Seating and ANSI/BIFMA X5.5 Desk/Table Products.
Setup and Assembly
Your ECR4Kids table and chair set arrives ready-to-assemble. Please ensure all components are present before beginning assembly. Adult assembly is required.
Components Checklist:
- 1 x Hardwood Tabletop
- 4 x Table Legs
- 2 x Hardwood Chairs (pre-assembled or requiring minor assembly)
- All necessary hardware (screws, bolts, Allen wrench, etc.)
Assembly Steps:
- Carefully unpack all components and lay them out on a soft, clean surface to prevent scratching.
- Attach the four table legs to the tabletop using the provided hardware. Ensure all connections are secure but do not overtighten initially.
- If chairs require assembly, follow the specific instructions provided with the chair components to attach the backrests and legs to the seat base.
- Once all components are assembled, place the table and chairs upright. Gently tighten all fasteners to ensure stability.
Image: Table dimensions showing 24 inches width, 24 inches depth, and 20.8 inches height.
Image: Chair dimensions showing 12.25 inches width, 12 inches depth, 22.25 inches overall height, and 10 inches seat height.
Operating and Usage
The ECR4Kids table and chair set is designed for children's activities, providing a comfortable and safe environment for learning, playing, and snacking.
Key Features:
- Dedicated Workspace: Provides a child-friendly height for various activities.
- Space-Saving Design: Chairs can be inverted to stack or nest under the table when not in use, optimizing floor space.
- Safety Features: Smooth and rounded edges for child safety. Angled rear legs provide enhanced stability.
- Floor Protection: Chairs are equipped with nylon glides to protect floors from scratches.
Image: Two children seated at the ECR4Kids table, demonstrating its use as a dedicated learning and play area.
Image: Detailed view of the chair, illustrating smooth edges, a vented back for air circulation, angled rear legs for stability, and nylon glides for floor protection.
Maintenance
Proper care and maintenance will extend the life of your ECR4Kids table and chair set.
- Cleaning: Wipe surfaces with a dry cloth. For stubborn marks, a slightly damp cloth can be used, followed immediately by a dry cloth. Avoid abrasive cleaners or harsh chemicals.
- Wood Care: The honey stain finish is designed to resist daily wear and tear. Avoid prolonged exposure to direct sunlight or extreme temperature changes to prevent wood warping or fading.
- Fasteners: Periodically check and tighten all screws and bolts to ensure the structural integrity of the table and chairs.
Image: A hand wiping the table surface with a dry cloth, demonstrating the recommended cleaning method.
Troubleshooting
If you encounter any issues with your ECR4Kids table and chair set, consider the following:
- Wobbling Table/Chair: Ensure all assembly fasteners are securely tightened. Check that the product is placed on a level surface.
- Damaged Parts: If any part is damaged or missing upon arrival, do not attempt to assemble or use the product. Contact customer support for assistance.
Specifications
| Feature | Detail |
|---|---|
| Model Number | ELR-7113-HY |
| Product Dimensions (Table) | 24" W x 24" D x 20.8" H (60.96 x 60.96 x 52.83 cm) |
| Chair Dimensions | 12.25" W x 12" D x 22.25" H |
| Chair Seat Height | 10" (25.4 cm) |
| Material | Wood (Sustainable Rubberwood) |
| Color | Honey |
| Item Weight | 20.2 Pounds (9.16 kg) |
| Number of Items | 3 (1 table, 2 chairs) |
| Assembly Required | Yes |
| Product Care Instructions | Wipe with Dry Cloth |
Image: Chart illustrating recommended seat heights, age ranges, and weight capacities for children's furniture, including functional and proof load information.
Warranty and Support
ECR4Kids is committed to providing high-quality products. For specific warranty information or if you require assistance with your product, please contact ECR4Kids customer support directly. Keep your purchase receipt for any warranty claims.
For further inquiries or support, please visit the official ECR4Kids website or contact their customer service department.
