1. Introduction
Thank you for choosing the Noirot Amaroc Electric Radiator. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new ceramic inertia heater. Please read these instructions carefully before use and retain them for future reference.

Image 1.1: Front view of the Noirot Amaroc Electric Radiator. This image displays the sleek, white design of the radiator, highlighting its modern aesthetic and compact form factor suitable for various indoor environments.
The Noirot Amaroc is designed to provide gentle and permanent heat through its ceramic inertia core, ensuring consistent comfort. It is certified for quality and origin, reflecting its robust construction and performance.

Image 1.2: Detailed view of the ceramic inertia core. This image illustrates the internal heating element responsible for the radiator's gentle and sustained heat distribution, a key feature for energy efficiency and comfort.
2. Safety Instructions
Please observe the following safety precautions to prevent electric shock, fire, injury, or damage to the appliance.
- Read all instructions before using this appliance.
- Do not operate any heater with a damaged cord or plug, or after the heater malfunctions or has been dropped or damaged in any manner.
- Do not use outdoors. This heater is intended for indoor use only.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- To disconnect heater, turn controls to OFF, then remove plug from outlet.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
- Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
- Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- The heater must not be located immediately below a socket outlet.
- Do not cover the heater.
- This heater is suitable for use in bathrooms, provided it is installed in accordance with local wiring regulations and positioned outside of splash zones (Volume 0, 1, 2). Consult a qualified electrician for bathroom installation.
3. Package Contents
Upon unpacking, please verify that all the following items are present and undamaged:
- Noirot Amaroc Electric Radiator (Model DCN3293FDEC)
- Wall mounting bracket kit
- User Manual
If any items are missing or damaged, please contact your retailer immediately.
4. Installation and Setup
Proper installation is crucial for the safe and efficient operation of your radiator. It is recommended that installation be performed by a qualified professional.
4.1 Choosing a Location
- Install the radiator on a flat, stable wall surface.
- Ensure there is adequate clearance around the radiator for proper air circulation (minimum 15 cm from floor, 10 cm from sides, 20 cm from top).
- Avoid placing the radiator directly under a power outlet.
- Do not install near curtains, flammable materials, or in areas prone to excessive moisture (unless specifically wired for bathroom use by a professional).

Image 4.1: Radiator installed in a room, demonstrating typical placement. This image shows the radiator mounted on a wall in a living space, illustrating its discreet integration into home decor while providing gentle heat.

Image 4.2: Radiator installed in a room with a window. This image provides another example of the radiator's placement, suggesting its effectiveness even in areas with potential drafts, thanks to its radiant heating method.
4.2 Wall Mounting (General Guide)
- Marking: Use the provided wall mounting bracket as a template to mark the drilling points on the wall. Ensure the marks are level.
- Drilling: Drill holes at the marked points using an appropriate drill bit for your wall type.
- Anchoring: Insert wall plugs (if necessary) into the drilled holes.
- Attach Bracket: Secure the wall mounting bracket to the wall using the screws provided.
- Mount Radiator: Carefully lift the radiator and hook it onto the wall mounting bracket. Ensure it is securely seated.
- Final Securement: Some models may have additional locking mechanisms to prevent accidental dislodgement. Secure these as per the specific instructions in your package.
4.3 Electrical Connection
- Ensure the main power supply is switched off at the circuit breaker before making any electrical connections.
- Connect the radiator's power cable to a suitable, grounded electrical outlet. Do not use extension cords or multi-plugs.
- For permanent wiring or bathroom installations, consult a qualified electrician to ensure compliance with local electrical codes.
5. Operation
The Noirot Amaroc radiator features an intuitive control panel for easy temperature and mode adjustments.

Image 5.1: Detailed view of the control panel. This image highlights the digital display and various buttons for setting temperature, selecting operating modes, and accessing energy-saving functions.
5.1 Power On/Off
- Plug the radiator into a grounded power outlet.
- Press the Power button (usually marked with a circle and vertical line symbol) on the control panel to turn the unit on or off.
5.2 Setting the Temperature
- When the radiator is on, the current room temperature or set temperature will be displayed.
- Use the + and - buttons to adjust your desired temperature. The display will show the new setpoint.
- The radiator will automatically adjust its heating output to maintain the set temperature.
5.3 Operating Modes
Press the MODE button to cycle through the available operating modes:
- Comfort Mode: Maintains your desired set temperature for continuous comfort.
- Eco Mode: Operates at a slightly lower temperature than Comfort mode (e.g., 3-4°C below) to save energy while maintaining a comfortable background heat.
- Frost Protection Mode: Maintains a minimum temperature (e.g., 7°C) to prevent freezing in unoccupied rooms.
- Program Mode (if available): Allows you to set custom heating schedules for different times of the day or week. Refer to the specific programming instructions in your package for detailed setup.
5.4 Energy Saving Features
The Noirot Amaroc radiator may include advanced features to optimize energy consumption:
- Open Window Detection: The radiator can detect a sudden drop in temperature (e.g., from an open window) and temporarily stop heating to avoid wasting energy. Heating resumes when the window is closed.
- Presence Detection: Some models may adjust heating based on human presence in the room, reducing output when the room is empty.
Consult your specific model's detailed instructions for activating and customizing these features.
6. Maintenance
Regular maintenance ensures the longevity and efficient operation of your radiator.
- Cleaning:
- Always unplug the radiator and allow it to cool completely before cleaning.
- Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Do not allow water to drip into the interior of the radiator.
- Dust Removal: Periodically use a soft brush or vacuum cleaner with a brush attachment to remove dust from the air vents and grilles.
- Storage: If storing the radiator for an extended period, ensure it is clean and dry. Store it in a cool, dry place, preferably in its original packaging.
Important: Do not attempt to open or repair the radiator yourself. Refer all servicing to qualified service personnel.
7. Troubleshooting
If you encounter issues with your Noirot Amaroc radiator, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Radiator does not turn on. |
|
|
| Radiator is on but not heating. |
|
|
| Unusual noises or smells. |
|
|
If the problem persists after trying these solutions, please contact Noirot customer support or a qualified technician.
8. Specifications
| Brand | Noirot |
| Model Number | DCN3293FDEC (Amaroc) |
| Heating Method | Radiant with Ceramic Inertia |
| Heat Output | 1000 Watts |
| Power Source | Electric Cable |
| Color | White |
| Dimensions (Product) | 62 x 61 x 14 cm (approximate, based on package dimensions) |
| Item Weight | 14 Kilograms |
| Intended Use | Indoor (suitable for bathrooms when professionally installed) |
| Special Features | Ceramic Inertia, Gentle & Permanent Heat, Certified Origine France Garantie, NF |
9. Warranty and Support
Noirot products are manufactured to high standards and are typically covered by a manufacturer's warranty. The specific terms and duration of your warranty may vary based on your region and point of purchase. Please refer to the warranty documentation included with your product or contact your retailer for details.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Noirot customer support. Contact information can usually be found on the manufacturer's official website or on your purchase receipt.
It is recommended to retain your proof of purchase (invoice or receipt) as it serves as validation for your warranty.