Introduction
Thank you for choosing the BLNAN 24W LED Ceiling Light with Radar Motion Detector. This manual provides essential information for the safe installation, operation, and maintenance of your new ceiling light. Please read these instructions carefully before installation and retain them for future reference.
Product Overview
Key Features
- Adjustable Brightness: Dimmable from 10% to 100% via remote control.
- Adjustable Color Temperature: Select between 3000K (Warm White), 4000K (Neutral White), and 5000K (Cool White) using a sliding switch on the back of the panel or the remote control.
- Radar Motion Sensor: Advanced 5.8G radar sensor for sensitive and wide-range motion detection, capable of penetrating non-metallic obstacles.
- Customizable Sensor Settings: Adjustable detection distance (1.5m, 3m, 6m), light sensitivity (disabled, 15 Lux, 50 Lux), and hold time (5s, 30s, 1min, 5min).
- Multiple Operating Modes: Includes 'Always On', 'Reset Mode', 'Motion Detection Only', and 'Motion + Light Detection'.
- Energy Efficient: Low power consumption, especially in night light mode (2.4W) and sensor-only mode (0.25W).
- Durable Construction: Made with high-quality SMD2835 LEDs and V2 flame-retardant polycarbonate material.
Components
- BLNAN 24W LED Ceiling Light
- Remote Control
- Mounting Hardware (screws, wall anchors)
- User Manual
Safety Instructions
- Always turn off the main power supply before installation, maintenance, or cleaning.
- Installation should be performed by a qualified electrician if you are unsure.
- Ensure the mounting surface is structurally sound and can support the weight of the fixture.
- Do not connect the light to an external dimmer switch, as this product has integrated dimming functionality via remote control.
- Keep the product away from water and high humidity, as it is not waterproof.
- Avoid placing the light within 2 meters of a 5G signal source to prevent potential interference with the radar sensor.
- This product is designed for indoor use only.
Setup and Installation
Follow these steps for safe and proper installation:
- Prepare for Installation:
- Turn off the power at the circuit breaker before starting.
- Gather necessary tools: screwdriver, drill, wire strippers.
- Mount the Bracket:
- Attach the mounting bracket to the ceiling using the provided screws and wall anchors. Ensure it is securely fastened.
- Connect Wiring:
- Connect the live (brown) and neutral (blue) wires from the ceiling light to the corresponding wires from your household electrical supply. This light fixture does not require a ground wire due to its insulated polycarbonate material.
- Use the metal safety cable to temporarily hang the light fixture from the mounting bracket during wiring to ease installation.
Image: Installation diagram showing wiring and dimensions. Note the two arrows facing each other to ensure parallel installation.
- Select Color Temperature:
- Before attaching the light to the ceiling, locate the 3-speed sliding switch on the back of the light panel.
- Select your desired initial color temperature: 3000K (Warm White), 4000K (Neutral White), or 5000K (Cool White). This can also be adjusted later via remote control.
- Secure the Light Fixture:
- Carefully align the light fixture with the mounting bracket and secure it in place.
- Restore Power:
- Turn the main power supply back on at the circuit breaker.
Operating Instructions
The BLNAN LED Ceiling Light offers various customizable settings via the included remote control.
Remote Control Functions
- ON/OFF Button: Press ON to keep the light continuously on, functioning as a standard 4000K white lamp. Press OFF to turn off.
- Brightness Adjustment: Use the brightness buttons to adjust the light intensity from 10% to 100%.
- Color Temperature Adjustment: Cycle through 3000K (Warm White), 4000K (Neutral White), and 5000K (Cool White).
- Night Light Mode: Activates a low-brightness warm white light (approx. 2.4W).
- Detection Distance Settings: Adjust the radar sensor's detection range to 1.5m (25%), 3m (50%), or 6m (100%).
- Light Sensitivity Settings: Set the sensor's light sensitivity to:
- Disabled: Motion sensor is active regardless of ambient light (day or night).
- 50 Lux: Motion sensor activates when ambient light is below 50 Lux (dusk conditions).
- 15 Lux: Motion sensor activates when ambient light is below 15 Lux (night conditions).
- Hold Time Settings: Choose how long the light stays on after motion is no longer detected: 5 seconds, 30 seconds, 1 minute, or 5 minutes.
- Reset Mode: Returns sensor settings to default: 1.5m motion detection, 50 Lux light sensitivity, 30s hold time.
Note: When you press any setting button on the remote, the light will flash once to confirm the setting has been successfully applied.
Image: Remote control and radar motion sensor detection range settings.
Image: Adjustable color temperature (3000K, 4500K, 6500K) and brightness (10%-100%).
Image: Light sensor intensity and hold time settings.
Radar Sensor Advantages
The BLNAN ceiling light utilizes a 5.8G radar sensor, offering superior performance compared to traditional infrared sensors:
- Microwave Detection: Sends and receives 5.8G microwaves to detect movement.
- Obstacle Penetration: Microwaves can pass through non-metallic obstacles like cabinets, tables, glass, doors, windows, and walls without interference.
- Wide Detection Angle: Offers a 360° detection angle with a maximum detection distance of 6 meters.
- Temperature Independent: Not affected by temperature differences, unlike infrared sensors which can be falsely triggered by heat.
Image: Comparison of BLNAN Radar Sensor vs. Infrared Sensor.
Maintenance
- Cleaning: Disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Bulb Replacement: The LED light source is integrated and not user-replaceable. The average lifespan exceeds 30,000 hours.
- Inspection: Periodically check for any loose connections or damage to the fixture.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. Incorrect wiring. Sensor settings too high (e.g., light sensitivity set to 15 Lux during daytime). | Check circuit breaker. Verify wiring connections. Adjust light sensitivity or set to 'Disabled' for testing. |
| Light stays on continuously. | 'Always On' mode activated. Constant motion detected. Hold time set too long. | Press the OFF button on the remote or cycle modes. Ensure no continuous movement in detection area. Reduce hold time setting. |
| Light flashes or flickers. | Interference from 5G signals. Loose wiring connection. | Ensure light is at least 2 meters away from 5G signal sources. Check and secure wiring connections (power off first). |
| Motion sensor not detecting. | Detection distance set too low. Light sensitivity set too high for current ambient light. Obstruction blocking sensor. | Increase detection distance setting. Adjust light sensitivity or set to 'Disabled'. Ensure sensor is not physically blocked. |
| Remote control not working. | Battery depleted. Remote out of range. | Replace remote control battery. Ensure remote is pointed at the light and within effective range. |
Specifications
| Feature | Specification |
|---|---|
| Model Number | LS-CL-I24W-M-DCCT |
| Dimensions (L x W x H) | 30 x 30 x 2.5 cm |
| Weight | 990 grams |
| Power | 24 Watts |
| Luminous Flux | 2400 Lumens |
| Color Temperature | 3000K / 4000K / 5000K (Adjustable) |
| Voltage | 230 Volts |
| Material | Polycarbonate (PC) |
| Motion Sensor Type | 5.8G Radar Sensor |
| Detection Angle | 360° |
| Detection Range | 1.5m / 3m / 6m (Adjustable) |
| Hold Time | 5s / 30s / 1min / 5min (Adjustable) |
| Light Sensitivity | Disabled / 15 Lux / 50 Lux (Adjustable) |
| Lifespan | 30,000+ hours |
| Energy Efficiency Class | F |
| Indoor/Outdoor Use | Indoor |
| Control Method | Remote Control |
Image: EU Energy Label. For more details, visit EPREL Database.
Warranty and Support
BLNAN products are manufactured to high-quality standards. For any questions, technical support, or warranty claims, please contact your retailer or BLNAN customer service. Please have your model number (LS-CL-I24W-M-DCCT) and purchase information ready when contacting support.