PureMounts PM-HDY-00 Hair Dryer Stand for Dyson Supersonic User Manual

1. Introduction

This manual provides instructions for the PureMounts PM-HDY-00 Hair Dryer Stand, specifically designed for the Dyson Supersonic hair dryer. This stand offers a secure and elegant storage solution, featuring magnetic attachment, integrated cable management, and protective silicone pads.

The magnetic attachment ensures your Dyson Supersonic remains securely in place, preventing accidental falls. Integrated cable management allows for neat storage of the power cord, avoiding tangles. Additionally, silicone pads protect your Dyson Supersonic from scratches and damage, maintaining its pristine condition. This stand combines functionality with aesthetics, making it a practical and elegant addition to any bathroom.

Image 1.1: Front view of the PureMounts PM-HDY-00 Hair Dryer Stand.

2. Safety Information

• Read all instructions carefully before assembly and use.
• Keep this manual for future reference.
• Ensure the stand is placed on a stable, level surface to prevent tipping.
• Do not overload the stand with items other than the intended hair dryer and its accessories.
• Keep out of reach of children and pets.
• Clean the stand with a soft, damp cloth. Avoid abrasive cleaners.

3. Package Contents

Verify that all components are present before proceeding with assembly:

• Main Stand Body (Steel)
• Base Plate (Steel)
• Silicone Pad for Base
• Silicone Pad for Hair Dryer Holder
• Small Silicone Cable Clip
• Assembly Screws

Image 3.1: Components of the PureMounts PM-HDY-00 Hair Dryer Stand, including the main body, base, silicone pads, and packaging.

4. Setup and Installation

Follow these steps to assemble your PureMounts hair dryer stand:

1. Attach the Main Stand Body to the Base: Align the main stand body with the base plate. Secure them together using the provided screws. Ensure they are tightened firmly but do not overtighten.
   

   Image 4.1: Rear view illustrating the attachment points for the main stand body to the base.

2. Insert Silicone Pads: Place the round silicone pad into the designated recess on the base. Insert the U-shaped silicone pad into the top holder of the main stand body.
3. Attach Cable Clip: Secure the small silicone cable clip to the side or back of the stand as desired for cable management.
4. Position the Stand: Place the assembled stand on a flat, stable surface in your desired location.
   

   Image 4.2: Fully assembled PureMounts PM-HDY-00 Hair Dryer Stand.

5. Operating Instructions

Using your PureMounts hair dryer stand is straightforward:

1. Placing the Hair Dryer: Gently place your Dyson Supersonic hair dryer into the top holder. The magnetic attachment will secure it in place.
   

   Image 5.1: Dyson Supersonic hair dryer securely placed on the stand.

2. Storing Attachments: The two circular cutouts on the main stand body are designed to hold magnetic attachments for your Dyson Supersonic.
3. Cable Management: Wrap the power cord around the base or use the attached silicone cable clip to keep the cord tidy and prevent tangles.

6. Maintenance

To ensure the longevity and appearance of your stand:

• Cleaning: Wipe the stand regularly with a soft, slightly damp cloth. For stubborn marks, a mild soap solution can be used, followed by drying with a clean cloth.
• Avoid Chemicals: Do not use harsh chemicals, abrasive cleaners, or scouring pads, as these can damage the finish.
• Silicone Pads: Ensure the silicone pads are correctly installed and free of debris to maintain optimal protection for your hair dryer.

7. Troubleshooting

If you encounter any issues with your PureMounts hair dryer stand, consider the following:

• Stand Instability: Ensure the stand is placed on a completely flat and stable surface. Check that all assembly screws are securely tightened.
• Hair Dryer Not Securing Properly: Verify that the Dyson Supersonic is correctly aligned with the magnetic holder. Ensure no obstructions are preventing a proper magnetic connection.
• Scratches on Hair Dryer: Confirm that the silicone pads are correctly installed and are not damaged. The pads are designed to prevent scratches.

8. Specifications

Image 8.1: Dimensional drawing of the stand, showing key measurements.

9. Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official PureMounts website.