WANAI D-WBJ-10A-BLACK
Contents
WANAI Ice Maker User Manual
Model: D-WBJ-10A-BLACK
1. Introduction
This user manual provides important information for the safe and efficient operation of your WANAI Countertop Portable Ice Maker. Please read this manual thoroughly before first use and retain it for future reference.

Image: The WANAI Countertop Portable Ice Maker, showing its compact design and included ice scoop and basket.
2. What's in the Box
Upon unpacking, please ensure all items listed below are present and in good condition:
- Ice maker machine
- User manual
- Ice basket
- Ice scoop
3. Product Features
- Lightweight and Portable Design: Constructed from high-density ABS material with a durable handle for easy transport. Features a large transparent lid to observe ice making and provide thermal insulation. Dimensions: 12.6(D) x 8.8(W) x 11.6(H) inches; Weight: 15 lbs.
- Smart & Simple Operation: LCD touch panel for easy control. Indicators alert when the ice basket is full or when water needs to be added.
- Fast Ice Production: Produces 9 bullet-shaped ice cubes in 6-8 minutes. Capable of producing up to 26 pounds of ice per day.
- Quiet Operation: Equipped with new condensing technology and a silent fan, operating at less than 40 decibels.
- Automatic Self-Cleaning System: Activated by pressing the on/off button for 5 seconds, this function cleans impurities from the ice making process.
4. Safety Instructions
To ensure safe operation and prevent damage, please adhere to the following safety guidelines:
- Always plug the ice maker into a grounded electrical outlet with the correct voltage (110 Volts).
- Do not immerse the appliance, power cord, or plug in water or other liquids.
- Keep the ice maker away from heat sources and direct sunlight.
- Ensure adequate ventilation around the unit. Do not block air vents.
- Unplug the ice maker before cleaning or when not in use for extended periods.
- Do not operate the appliance with a damaged cord or plug.
- This appliance is for household use only.
- Keep children away from the ice maker during operation.
5. Setup
- Unpacking: Carefully remove the ice maker from its packaging. Remove all packing materials, including any tape or protective film.
- Placement: Place the ice maker on a flat, stable surface, away from direct sunlight and heat sources. Ensure there is at least 4 inches of space around the unit for proper ventilation.
- Initial Cleaning: Before first use, clean the interior of the ice maker. Refer to the "Maintenance and Cleaning" section for detailed instructions.
- First Use Preparation: After cleaning, allow the unit to sit upright for at least 24 hours before plugging it in. This allows the refrigerant to settle.
- Power Connection: Plug the ice maker into a grounded 110V electrical outlet.
Video: An overview of the WANAI ice maker, demonstrating its compact size and internal components, useful for initial setup understanding.
6. Operating Instructions
- Add Water: Open the lid and fill the water reservoir with clean, potable water up to the MAX fill line. It is recommended to use filtered water for best ice quality. The reservoir can hold up to 50 ounces of water.
- Power On: Press the "ON/OFF CLEAN" button to turn on the ice maker. The "POWER" indicator will illuminate.
- Select Ice Cube Size: Press the "SELECT" button to choose between "SMALL" or "LARGE" ice cube sizes. The corresponding indicator light will illuminate.
- Ice Making Process: The ice maker will begin the ice production cycle. Ice cubes will be ready in approximately 6-8 minutes.
- Ice Full Indicator: When the ice basket is full, the "ICE FULL" indicator will light up, and the ice making process will pause. Remove ice from the basket to resume production.
- Add Water Indicator: If the water level in the reservoir is too low, the "ADD WATER" indicator will light up. Add more water to continue ice production.
- Turning Off: Press the "ON/OFF CLEAN" button again to turn off the ice maker.

Image: Close-up of the WANAI Ice Maker's control panel, showing the ON/OFF CLEAN, SMALL, LARGE, CLEAN, and SELECT buttons with their respective indicator lights.
Video: Demonstration of the ice maker producing ice cubes in 6-8 minutes, highlighting the speed of the process.
7. Maintenance and Cleaning
Regular cleaning and maintenance will prolong the life of your ice maker and ensure optimal performance.
Automatic Self-Cleaning Function:
- Ensure the water reservoir is filled with clean water.
- Press and hold the "ON/OFF CLEAN" button for 5 seconds. The "CLEAN" indicator will illuminate.
- The ice maker will perform an automatic cleaning cycle, sweeping away impurities.
- Once the cleaning cycle is complete, drain the water from the unit using the bottom drain plug.
Manual Cleaning:
- Unplug the ice maker from the power outlet.
- Remove the ice basket and clean it with mild detergent and warm water. Rinse thoroughly.
- Drain any remaining water from the reservoir using the drain plug located at the bottom of the unit.
- Wipe the interior of the ice maker with a soft cloth dampened with a mixture of water and a small amount of vinegar or mild detergent.
- Rinse the interior by adding clean water, running a short cycle (without making ice), and then draining it. Repeat if necessary.
- Wipe the exterior with a soft, damp cloth.
- Ensure all parts are completely dry before reassembling and storing or using the ice maker.

Image: The WANAI Ice Maker demonstrating its automatic self-cleaning function with water circulating inside the reservoir.
8. Troubleshooting
If you encounter issues with your ice maker, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Ice maker not producing ice. | No water in reservoir; "ADD WATER" indicator on. Unit not plugged in. Air temperature too high. | Fill water reservoir. Ensure unit is properly plugged in. Operate in a cooler environment. |
| "ADD WATER" indicator is on. | Water level is too low. | Add clean water to the reservoir up to the MAX fill line. |
| "ICE FULL" indicator is on. | Ice basket is full. | Remove ice from the basket. |
| Ice cubes are too small or clumpy. | Water temperature too high. Mineral buildup. | Use colder water. Perform a cleaning cycle to remove mineral buildup. |
| Unusual noise during operation. | Unit not level. Internal components settling. | Ensure the unit is on a flat, stable surface. Minor noises are normal during initial operation. |
9. Specifications
| Feature | Detail |
|---|---|
| Brand | WANAI |
| Model Name | WANAI Ice Maker |
| Item Model Number | D-WBJ-10A-BLACK |
| Product Dimensions (D x W x H) | 12.6" x 8.8" x 11.6" |
| Weight | 17.5 Pounds |
| Capacity (Water) | 3.1 Pounds (approx. 50 ounces) |
| Voltage | 110 Volts |
| Ice Production Rate | 9 cubes in 6-8 minutes |
| Daily Ice Production | Up to 26 lbs |
| Noise Level | Less than 40 decibels |
10. Warranty and Support
Your WANAI Ice Maker is covered by a 1-year warranty from the date of purchase, covering defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
For technical support, troubleshooting assistance, or warranty inquiries, please contact WANAI customer service. Contact information can typically be found on the product packaging or the official WANAI website.
For more information, visit the WANAI Store on Amazon.
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.