Vigosit Cute Gaming Chair with Cat Paw Lumbar Cushion and Cat Ears Instruction Manual

1. Introduction

Thank you for choosing the Vigosit Cute Gaming Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read these instructions carefully before use and retain them for future reference.

This ergonomic gaming chair is designed for comfort and support, featuring unique cat ear accents and a cat paw-shaped lumbar cushion, along with an adjustable footrest and recline function.

2. Safety Information

• Ensure all components are securely fastened before use. Regularly check and tighten screws.
• Do not stand on the chair. Use it only for sitting.
• Do not exceed the maximum weight capacity of 140 kg (approximately 308 lbs).
• Keep hands and fingers clear of moving parts during adjustment.
• Keep children away from the chair during assembly. Small parts may pose a choking hazard.
• Use the chair on a flat, stable surface.

3. Package Contents

Please verify that all parts are present before beginning assembly. Refer to the image below for a visual representation of the included components.

Image 3.1: All components of the Vigosit Cute Gaming Chair, including the main chair body, base, wheels, gas lift, arm pads, cat paw lumbar cushion, headrest pillow, and detachable cat ears.

• Chair Backrest
• Seat Base
• Armrests (pre-attached or separate)
• Star Base
• Casters (Wheels)
• Gas Lift Cylinder
• Gas Lift Cover
• Mechanism Plate
• Headrest Pillow
• Cat Paw Lumbar Cushion
• Detachable Cat Ears (2 pieces)
• Hardware Pack (screws, Allen wrench)

4. Assembly Instructions

Follow these steps to assemble your Vigosit Cute Gaming Chair. It is recommended to assemble the chair on a soft, clean surface to prevent damage.

Step 1: Attach Casters to the Base

Insert the five casters into the holes at the end of each leg of the star base. Push firmly until they click into place.

Step 2: Install Gas Lift

Place the gas lift cylinder into the center hole of the star base. Cover the gas lift with the telescopic plastic cover.

Step 3: Attach Mechanism Plate to Seat Base

Align the mechanism plate with the pre-drilled holes on the underside of the seat base. Ensure the front of the mechanism faces the front of the seat. Secure with screws using the provided Allen wrench.

Step 4: Connect Seat Base to Gas Lift

Carefully place the assembled seat base onto the gas lift cylinder, ensuring the center hole of the mechanism plate aligns with the top of the gas lift.

Step 5: Attach Backrest to Seat Base

Align the backrest with the metal brackets on the seat base. Secure with screws on both sides. Ensure all screws are tightened evenly.

Step 6: Attach Headrest Pillow and Lumbar Cushion

The headrest pillow can be attached to the top of the backrest using its elastic straps. The cat paw lumbar cushion can be positioned on the lower backrest for support. Its straps allow for adjustment.

Image 4.1: Detail of the cat paw lumbar cushion, highlighting its soft velvet surface and full sponge filling, designed for comfort and support.

Step 7: Attach Detachable Cat Ears

The cat ears can be easily attached to the top of the backrest. They are designed to be removable and replaceable.

Image 4.2: Detail of the detachable cat ears, showing their placement on the headrest and the embroidered cat head logo on the backrest.

5. Operating Instructions

Your Vigosit Gaming Chair offers several adjustable features for personalized comfort.

5.1. Seat Height Adjustment

To adjust the seat height, pull the lever located on the right side of the seat upwards. While seated, lift your weight off the chair to raise the seat. To lower the seat, remain seated and pull the lever upwards.

5.2. Backrest Recline

To recline the backrest, pull the lever on the left side of the seat upwards. Lean back to your desired angle (between 90° and 155°). Release the lever to lock the backrest in position.

Image 5.1: This diagram illustrates the chair's ergonomic features, including a recline range of 90° to 155° and adjustable seat height, designed for various sitting positions.

5.3. Footrest Extension

To extend the footrest, pull the handle located on the side of the seat. The footrest will slide out. Push it back in when not in use.

5.4. Lumbar Cushion and Headrest Adjustment

The headrest pillow and cat paw lumbar cushion are adjustable. Position them to provide optimal support for your neck and lower back.

6. Maintenance and Care

• Cleaning: Wipe clean with a damp cloth. Avoid harsh chemicals or abrasive cleaners.
• Inspection: Periodically check all screws and bolts to ensure they are tight. Re-tighten as necessary.
• Fabric Care: For the velvet lumbar cushion and cat ears, gentle spot cleaning is recommended.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight may cause fading of the chair's material.

7. Troubleshooting

• Chair Squeaks: Check and tighten all screws. A small amount of lubricant on moving metal parts may help.
• Chair Does Not Adjust Height: Ensure the gas lift lever is fully engaged. If the issue persists, the gas lift cylinder may need replacement.
• Wobbly Chair: Verify that all screws are securely tightened, especially those connecting the backrest to the seat and the mechanism plate to the seat.
• Casters Not Rolling Smoothly: Check for debris (hair, dust) caught in the casters and clean them.

8. Specifications

Image 8.1: Detailed dimensions of the Vigosit Cute Gaming Chair, including height, width, and depth measurements, along with recommended user height and weight, and maximum load capacity.

9. Warranty and Support

Vigosit provides a one-month replacement service and a 1-year parts quality warranty for this product. For any questions, concerns, or assistance with assembly or operation, please contact our 24/7 customer service team. Details for contacting support can typically be found on the product packaging or the retailer's website.