LAOPAO Automatic Soap Dispenser with Sink Caddy

Introduction

Thank you for choosing the LAOPAO Automatic Soap Dispenser with Sink Caddy. This manual provides essential information for the proper setup, operation, and maintenance of your new device. Please read these instructions carefully before use to ensure optimal performance and longevity of the product.

Product Overview

The LAOPAO Automatic Soap Dispenser with Sink Caddy is designed to provide a convenient and hygienic solution for your kitchen or bathroom. It features a touchless soap dispensing mechanism, a built-in rechargeable battery, and an integrated caddy for organizing sponges and brushes. The durable stainless steel construction and detachable drip tray ensure easy cleaning and maintenance.

Image: The LAOPAO Automatic Soap Dispenser with Sink Caddy, featuring a touchless dispenser and integrated storage for a sponge and brush, positioned next to a kitchen sink.

Package Contents

Please check the package for the following items:

• 1 x LAOPAO Automatic Soap Dispenser Unit
• 1 x Sink Caddy Organizer (Stainless Steel)
• 1 x Detachable Drip Tray
• 1 x USB Charging Cable (Type-C)
• 1 x User Manual (this document)

Setup Instructions

1. Initial Charging

Before first use, fully charge the soap dispenser. The unit has a large capacity built-in battery that provides approximately 5000 uses on a full charge. A full charge typically takes about 3 hours.

1. Locate the USB-C charging port on the top of the dispenser pump.
2. Open the protective cover of the charging port.
3. Connect the provided USB charging cable to the dispenser and a suitable USB power adapter (not included).
4. The indicator light will show charging status (e.g., red for charging, blue for fully charged).
5. Once fully charged, disconnect the cable and close the protective cover to prevent water ingress.

Image: Close-up of the LAOPAO Automatic Soap Dispenser's USB-C charging port with a cable inserted, showing the indicator light. The image highlights the large capacity built-in battery, 3-hour full charge time, and 5000 uses per charge.

2. Assembling the Sink Caddy

The sink caddy is designed for easy assembly and cleaning.

1. Place the stainless steel caddy organizer on a flat surface.
2. Insert the soap dispenser unit into the designated opening in the caddy.
3. Attach the detachable drip tray to the bottom front of the caddy. Ensure it clicks securely into place.

Image: A hand detaching the drip tray from the LAOPAO Automatic Soap Dispenser and sink caddy, illustrating its removable design for easy cleaning.

3. Filling with Soap

The soap reservoir has a capacity of approximately 8.5 oz (251.55 ml).

1. Remove the soap dispenser pump head from the reservoir by twisting it counter-clockwise or pulling it upwards.
2. Pour liquid hand soap or dish soap into the reservoir. Do not overfill.
3. For thicker soaps, it is recommended to dilute them with water at a ratio of 1 part soap to 3 parts water to ensure smooth dispensing and prevent clogging.
4. Reattach the pump head by aligning it and twisting clockwise or pushing down until secure.

Operating Instructions

1. Power On/Off

The dispenser features a simple one-key operation.

• To power on: Press and hold the power button (usually located on top of the dispenser pump) for a few seconds until the indicator light illuminates.
• To power off: Press and hold the power button again for a few seconds until the indicator light turns off.

2. Dispensing Soap

The automatic dispenser uses an infrared sensor for touchless operation.

1. Ensure the dispenser is powered on.
2. Place your hand or a sponge directly under the dispenser nozzle.
3. The infrared sensor will detect your hand and dispense a measured amount of soap.
4. Remove your hand once soap is dispensed.

Image: A hand positioned under the nozzle of the LAOPAO Automatic Soap Dispenser, demonstrating the touchless operation via its infrared sensor.

Note: If the dispensed amount is too much, try positioning your hand slightly further away or quickly removing it after the initial dispense. Diluting thicker soaps can also help control the flow.

Maintenance

1. Cleaning the Dispenser and Caddy

Regular cleaning will help maintain the appearance and functionality of your dispenser.

• The stainless steel body is fingerprint-proof and easy to clean. Wipe with a soft, damp cloth.
• The detachable drip tray can be easily removed and rinsed under water to clear any accumulated soap or water.
• The dispenser unit has an IPX5 water resistance rating, meaning it is protected against low-pressure water jets from any direction. However, do not immerse the entire unit in water.

Image: The LAOPAO Automatic Soap Dispenser and sink caddy positioned near a sink with splashing water, illustrating its IPX5 water resistance feature.

2. Refilling Soap

Refill the soap reservoir as described in the "Setup Instructions" when the soap level is low.

3. Battery Maintenance

Recharge the dispenser when the indicator light signals low battery or when dispensing performance decreases. Ensure the charging port cover is closed when not charging to protect against moisture.

Troubleshooting

If you encounter issues with your LAOPAO Automatic Soap Dispenser, please refer to the following common problems and solutions:

Specifications

Warranty and Support

LAOPAO offers a 12-month after-sale service for all its products. If you have any questions, concerns, or require assistance with your Automatic Soap Dispenser, please do not hesitate to contact our customer support team.

For support, please visit the LAOPAO store on Amazon or refer to the contact information provided with your purchase documentation.

LAOPAO Store: LAOPAO Inc. on Amazon