Zwide Compact Wireless Lavalier Microphone M6-L User Manual

1. Introduction

The Zwide Compact Wireless Lavalier Microphone M6-L is designed for high-quality audio recording with Lightning port devices such as iPhone, iPad, and iPod Touch. This system provides a cordless, omnidirectional condenser microphone solution for various applications including interviews, podcasts, vlogs, voice recordings, and live broadcasts. Its compact design and noise cancellation features ensure clear and stable audio capture.

2. Package Contents

Please verify that all items listed below are included in your package:

• Microphone Transmitter x2
• Lightning Receiver x1
• Charging Box x1
• Charging Cable x1
• User Manual x1

3. Product Overview

The Zwide M6-L system consists of two microphone transmitters, a Lightning receiver, and a portable charging case.

Image: The Zwide M6-L wireless lavalier microphone system, showing the charging case open with two microphones inside, and the Lightning receiver detached below.

Components:

• Microphone Transmitter (TX): Small, clip-on unit with an omnidirectional microphone and a power/noise cancellation button.
• Lightning Receiver (RX): Plugs directly into your iPhone, iPad, or iPod Touch.
• Charging Case: Stores and charges both microphone transmitters and the receiver. Features a digital display for battery level.

4. Setup Instructions

1. Charge the System: Before first use, ensure all components are fully charged. Place the microphone transmitters and receiver into the charging case and connect the charging cable to a power source. The charging case display will show the battery percentage.
2. Connect the Receiver: Plug the Lightning receiver directly into the Lightning port of your iPhone, iPad, or iPod Touch. The receiver's indicator light will flash red, then turn solid red when successfully connected.
3. Power On Microphones: Take one or both microphone transmitters out of the charging case. Press and hold the power button on the side of each microphone. The indicator light on the microphone will flash green, then turn solid green when paired with the receiver.
4. Position Microphones: Clip the microphone transmitter onto your clothing, ideally near your mouth, for optimal sound capture.
5. Start Recording: Open your preferred audio or video recording application on your device. The system is plug-and-play, requiring no additional drivers or apps.

5. Operating Instructions

Power On/Off:

• To power on a microphone transmitter, press and hold the side button until the green indicator light illuminates.
• To power off, press and hold the side button again until the light turns off.

Noise Cancellation Modes:

The Zwide M6-L features 3 levels of noise cancellation to adapt to different recording environments. Short-press the power button on the microphone transmitter to cycle through the noise cancellation levels (L1, L2, L3). Each press will change the level, indicated by a brief flash or change in the indicator light.

Image: Visual representation of the 3 levels of noise cancellation, illustrating how background noise is reduced.

Dual Microphone Use:

The system supports two microphone transmitters simultaneously, allowing for two-person interviews or recordings. Simply power on both transmitters and ensure they are paired with the receiver.

6. Charging

The charging case provides extended battery life for the microphones and receiver.

• Charging the Microphones/Receiver: Place the microphone transmitters and the receiver into their respective slots in the charging case. They will begin charging automatically.
• Charging the Case: Connect the provided USB-C charging cable to the charging port on the case and to a power adapter (not included). The digital display on the case indicates the current battery level.
• Battery Life: Each microphone transmitter offers up to 4.5 hours of operation on a single charge. The charging case, with its 300mAh battery, can provide approximately 4 full charges for the microphones, extending total usage time to over 30 hours.

Image: The Zwide M6-L charging case, illustrating the charging process for the microphones and receiver, with battery life details.

7. Specifications

8. Troubleshooting

• No Sound/Poor Sound Quality:
  • Ensure the Lightning receiver is fully inserted into your device's port.
  • Verify that the microphone transmitter(s) are powered on and successfully paired (solid green light).
  • Check the battery levels of both the microphones and the charging case.
  • Confirm that your recording application is set to use the external microphone.
  • Adjust noise cancellation levels (L1, L2, L3) to suit your environment.
• Microphone Not Pairing:
  • Ensure both the receiver and transmitter are charged.
  • Power cycle both the receiver (unplug and replug) and the transmitter (turn off and on).
  • Ensure no other 2.4GHz wireless devices are causing interference nearby.
• Short Battery Life:
  • Ensure the charging cable and power adapter are functioning correctly.
  • Verify that the microphones and receiver are properly seated in the charging case.

9. Maintenance

• Keep the device clean and dry. Avoid exposure to moisture or extreme temperatures.
• Use a soft, dry cloth to clean the microphone and receiver. Do not use harsh chemicals.
• Store the system in its charging case when not in use to protect it and keep it charged.

10. Warranty and Support

For warranty information and customer support, please refer to the documentation included with your purchase or contact Zwide customer service through their official website or the retailer where the product was purchased.