Yaheetech Metal Bed Frame 90 x 200 cm Instruction Manual

1. Introduction

Thank you for choosing the Yaheetech Metal Bed Frame. This manual provides essential information for the safe and correct assembly, usage, and maintenance of your new bed frame. Please read these instructions carefully before beginning assembly and retain them for future reference.

This single metal bed frame, measuring 90 x 200 cm, features a high headboard and footboard, a sturdy slatted base, and offers convenient under-bed storage space. Its minimalist design is suitable for various bedroom styles.

2. Safety Information

• Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
• Assemble the bed frame on a soft, clean surface (e.g., a carpet) to prevent scratches or damage.
• Do not overtighten screws during assembly, as this may damage the threads or components. Tighten all fasteners securely once assembly is complete.
• Keep small parts out of reach of children during assembly.
• The maximum weight capacity for this bed frame is 204 kg. Do not exceed this limit.
• Regularly check all bolts and screws to ensure they remain tight. Retighten as necessary.
• Do not stand on the bed frame or use it as a ladder.

3. Package Contents

Please verify that all components listed below are included in your package. If any parts are missing or damaged, please contact customer support.

• Headboard components
• Footboard components
• Side rails
• Slatted base (metal slats)
• Support legs
• Hardware pack (screws, bolts, Allen key, etc.)
• Instruction manual

4. Assembly Instructions (Setup)

Assembly typically takes approximately 1 hour with two people. Follow the illustrated instructions provided in your package. The main steps are outlined below:

1. Unpack and Identify Parts: Lay out all components on a soft, clean surface. Refer to the parts list to ensure everything is present.
2. Assemble Headboard and Footboard: Attach the decorative panels to the main frames of the headboard and footboard using the provided hardware.
3. Attach Side Rails: Connect the side rails to the assembled headboard and footboard. Ensure all connections are secure but do not fully tighten bolts yet.
4. Install Support Legs: Attach any central support legs to the bed frame structure.
5. Insert Slatted Base: Place the metal slats into the designated slots on the side rails. Ensure each slat is properly seated to prevent mattress slippage.
6. Final Tightening: Once all components are in place, systematically tighten all bolts and screws using the provided Allen key. Ensure the frame is stable and level.

5. Usage (Operating)

• Mattress Placement: Place a compatible mattress (90 x 200 cm) directly onto the slatted base. The high headboard and footboard, along with the integrated slats, are designed to keep the mattress stable and prevent it from shifting.
• Under-Bed Storage: Utilize the 32.5 cm ground clearance for convenient storage of items such as books, blankets, clothes, or shoes.
• Weight Distribution: Distribute weight evenly across the bed frame. Avoid concentrating heavy loads in one area.

6. Maintenance

• Cleaning: Wipe the metal frame with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the powder-coated finish.
• Inspection: Periodically inspect all connections, bolts, and screws. Retighten any loose fasteners to maintain stability and prevent squeaking.
• Protection: The bed frame features protective foot pads to prevent floor damage and reduce noise. Ensure these remain intact.

7. Troubleshooting

• Squeaking Noises: If the bed frame squeaks, check all bolts and screws and tighten them securely. Ensure the slats are properly seated in their supports. The frame is designed with anti-squeak protection.
• Mattress Slippage: If the mattress slides, verify that it is the correct size (90 x 200 cm) and that the built-in slats are correctly installed and holding the mattress in place.
• Instability: If the bed frame feels unstable, re-check all connections and ensure they are fully tightened. Confirm that the bed is on a level surface.

8. Specifications

9. Warranty and Support

For warranty information or if you encounter any issues not covered in this manual, please contact Yaheetech customer support. Details for contacting support can typically be found on the product packaging or the retailer's website where the product was purchased.

Please have your model number (YA-00129340) and purchase information ready when contacting support.