LUXOAK BMB007

Download PDF
Contents

LUXOAK Full Size Lift Up Storage Bed with Headboard and Charging Station

Model: BMB007 | Brand: LUXOAK

1. Introduction

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your LUXOAK Full Size Lift Up Storage Bed, Model BMB007. Please read this manual thoroughly before assembly and use to ensure safe and correct operation.

2. Safety Information

WARNING: Failure to follow these safety instructions may result in injury or damage to the product.

  • Gas Lift Mechanism: Be cautious when operating the gas lift mechanism. Ensure hands and fingers are clear of moving parts to avoid pinching or crushing injuries. Always lift and lower the bed frame smoothly and with control.
  • Weight Capacity: Do not exceed the maximum weight capacity of 1000 lbs (453 kg) for the bed frame. Overloading can cause structural damage and potential injury.
  • Assembly: Ensure all parts are correctly assembled and tightened according to the instructions. Loose connections can lead to instability and collapse. It is recommended that two adults assemble this bed frame.
  • Mattress Type: This bed frame is designed for use with a mattress only. A box spring is not required. Using a box spring in addition to a mattress may prevent the gas lift mechanism from staying open due to excessive weight. Recommended mattress height is 10-14 inches.
  • Stability: Place the bed on a flat, level surface. Do not stand or jump on the bed frame.
  • Children: Keep children away from the bed frame during assembly and operation of the lift mechanism.

3. Package Contents

Before beginning assembly, verify that all components are present and undamaged. Refer to the included parts list in your packaging. If any parts are missing or damaged, contact customer support immediately.

Typical components include:

  • Headboard with integrated charging station
  • Side rails and footboard panels
  • Gas lift mechanisms (2 units)
  • Metal support frame
  • Wooden slats
  • Hardware kit (screws, bolts, nuts, Allen wrench)
  • Anti-falling device for mattress retention

4. Setup and Assembly Instructions

Assembly typically takes approximately 30 minutes with two people. Follow the pictorial instructions provided in your package. Ensure all parts are correctly oriented before tightening screws.

  1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
  2. Assemble Headboard: Attach the headboard panels and secure the charging station unit.
  3. Connect Side Rails: Attach the side rails to the headboard and footboard using the provided hardware.
  4. Install Gas Lift Mechanism: Securely attach the gas lift mechanisms to the bed frame according to the diagrams. Ensure they are installed on the correct sides.
  5. Place Slats: Insert the wooden slats into the designated slots on the metal support frame. The snap-fit design ensures easy installation.
  6. Install Anti-Falling Device: Attach the anti-falling device at the foot of the bed to prevent the mattress from sliding when the bed is lifted.
  7. Final Tightening: Once all components are in place, carefully tighten all screws and bolts. Do not overtighten.
Diagram showing the dimensions of the LUXOAK Full Size Lift Up Storage Bed and its 1000 lbs weight capacity.
Figure 4.1: Product Dimensions and Weight Capacity. This image illustrates the overall dimensions of the full-size bed frame (82"L x 56"W x 39.5"H) and highlights its 1000 lbs weight capacity. It also shows the 12-inch height of the bed base and the 5-inch and 11-inch shelf depths on the headboard.
Close-up images detailing the gas lift design for easy access to storage and the anti-falling device to prevent bedding from sliding.
Figure 4.2: Gas Lift Design and Anti-Falling Device. The top image shows a hand pulling a strap to lift the bed frame, demonstrating the gas lift mechanism for easy access to the storage space. The bottom image details the anti-falling device, a small metal hook designed to prevent the mattress and bedding from sliding off the frame when it is lifted.

5. Operating Instructions

5.1. Gas Lift Storage Access

The bed frame features a gas lift mechanism for easy access to the under-bed storage space.

  1. Clear the Bed: Remove any heavy items from the mattress surface that might obstruct lifting.
  2. Lift the Mattress: Grasp the lifting strap or the edge of the bed frame at the foot end. With a firm and steady motion, lift the mattress upwards. The gas springs will assist in the lifting process.
  3. Access Storage: Once lifted, the bed frame will remain in an open position, providing full access to the storage compartment underneath.
  4. Close the Bed: To close, firmly pull the bed frame downwards. The gas springs will provide resistance, allowing for a controlled and gentle descent. Ensure no objects or body parts are in the path of the closing frame.
A full-size bed with the mattress lifted, revealing a spacious storage compartment underneath filled with luggage and storage boxes.
Figure 5.1: Gas Lift Storage in Use. This image shows the bed frame with the mattress fully lifted, exposing the large storage area beneath. Various items like luggage and storage boxes are visible, demonstrating the ample space available.

5.2. Charging Station Operation

The integrated headboard features a charging station for your convenience.

  • Power Connection: Ensure the bed frame's power cord is securely plugged into a standard 120V/12A wall outlet.
  • AC Outlets: Use the two standard AC outlets (120V/12A) to power lamps, laptops, or other electronic devices.
  • USB Ports: Use the two USB ports (5V/2A) to charge smartphones, tablets, and other USB-powered devices.
  • Shelf Storage: The headboard shelf provides convenient space for books, decorations, or personal items within easy reach.
Close-up of the headboard's charging station, showing two AC outlets, two USB ports, and a 6.5-foot power cord, with devices charging on the shelf.
Figure 5.2: Headboard Charging Station. This detailed view of the headboard shows the built-in charging station, which includes two 120V/12A AC outlets and two 5V/2A USB ports. A 6.5-foot power cord is also indicated. Devices like a tablet and smartphone are shown charging on the headboard shelf, demonstrating its functionality.

6. Maintenance

6.1. General Care

  • Cleaning: Wipe the bed frame surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
  • Hardware Check: Periodically check all screws and bolts to ensure they remain tight. Retighten as necessary to maintain stability.
  • Gas Lift Inspection: Inspect the gas lift mechanisms for any signs of wear or damage. If the lifting action becomes stiff or uneven, contact customer support.

6.2. Product Care Instructions

Upon receiving the package, please check if all parts are intact. Any issues should be reported immediately to the seller.

7. Troubleshooting

ProblemPossible CauseSolution
Bed frame does not lift or stay upToo much weight on the mattress (e.g., using a box spring); faulty gas lift mechanism.Ensure only a mattress is used (no box spring). If the issue persists, contact customer support for gas lift replacement.
Squeaking noisesLoose connections; friction between parts.Tighten all screws and bolts. Apply a small amount of lubricant to contact points if necessary.
Charging station not workingPower cord not plugged in; faulty outlet; internal wiring issue.Check if the power cord is securely plugged into a working wall outlet. Test the outlet with another device. If still not working, contact customer support.
Mattress slides when liftedAnti-falling device not installed or incorrectly installed.Ensure the anti-falling device is correctly installed at the foot of the bed frame.

8. Specifications

  • Model: BMB007
  • Brand: LUXOAK
  • Size: Full
  • Product Dimensions: 82"L x 56"W x 39.5"H
  • Item Weight: 111.5 pounds
  • Weight Capacity: 1000 lbs
  • Color: Black
  • Finish Type: Stained
  • Furniture Finish: Metallic
  • Special Features: Ample Storage Space, Easy to Assemble, Squeak Resistant, Sturdy Construction, Storage Headboard with Charging Station (2 AC Outlets, 2 USB Ports)
  • Compatible Mattress Size: Full (10-14 inch height recommended)
  • Assembly Required: Yes
  • UPC: 615272316232

9. Warranty and Support

For warranty information, please refer to the documentation included with your purchase or contact the seller directly. LUXOAK is committed to providing quality products and customer satisfaction.

If you encounter any issues or have questions regarding your LUXOAK Full Size Lift Up Storage Bed, Model BMB007, please contact our customer support team for assistance. Have your model number (BMB007) and purchase details ready when contacting support.

© 2025 LUXOAK. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.