Introduction
Thank you for choosing the LUXOAK Full Size Lift Up Storage Bed. This manual provides essential information for the safe assembly, operation, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Overall dimensions of the LUXOAK Full Size Lift Up Storage Bed, measuring 82 inches long, 56 inches wide, and 39.5 inches high, with a 1000 lbs capacity.
Safety Information
WARNING: Failure to follow these safety guidelines may result in injury or damage to the product.
- Do not exceed the maximum weight limit of 1000 pounds for the bed frame.
- Exercise caution when operating the gas lift mechanism to avoid injury. Ensure hands and fingers are clear of moving parts.
- Always ensure the mattress is properly seated on the frame before lifting or lowering.
- Keep children and pets away from the bed frame during assembly and operation of the lift mechanism.
- Periodically check all bolts and screws to ensure they remain tight. Loose connections can compromise stability and safety.
Setup and Assembly
The LUXOAK Lift Up Storage Bed is designed for easy assembly. Detailed instructions and labeled parts are included in the packaging. For optimal safety and efficiency, two people are recommended for assembly, which typically takes approximately 30 minutes.
Before You Begin
- Unpack all components and verify against the parts list provided in your assembly guide.
- Ensure you have the necessary tools (not included) as specified in the assembly instructions.
- Clear a spacious area for assembly to prevent damage to the product or your surroundings.
Important considerations before assembly, including multi-step self-assembly (tools required), recommendation for two people, and optional third-party installation.
Assembly Steps
Follow the step-by-step pictorial instructions provided in your product packaging. Ensure all connections are secure before proceeding to the next step. The slats feature a snap-fit design for simplified installation.
Operating Instructions
Gas Lift Storage Mechanism
The bed frame features a gas lifting mechanism for easy access to ample under-bed storage. To lift the frame:
- Remove any items from the mattress surface that might obstruct lifting.
- Locate the fabric pull strap at the foot of the bed.
- Firmly grasp the strap and lift the mattress frame upwards. The gas lifts will assist in raising and holding the frame in an open position.
- To lower, gently pull the frame downwards. The gas lifts will provide resistance for a controlled descent.
This storage space is ideal for suitcases, storage bags, or out-of-season bedding and clothes, helping to keep your room tidy.
The gas lift mechanism in action, revealing ample storage space underneath the mattress for luggage, storage boxes, quilts, and shoes.
Detail of the gas lift mechanism, highlighting the strap for easy lifting and access to the storage area.
Storage Headboard with Charging Station
The integrated headboard provides convenient storage shelves and a built-in charging station. The charging station includes two AC outlets and two USB ports, allowing you to charge your devices or power a lamp directly from your bed. The shelves are practical for storing books, decorations, or a clock.
Close-up view of the integrated charging station on the headboard, including two AC outlets and two USB ports, with a 6.5-foot power cord.
Mattress Compatibility
This platform bed frame is designed to support your mattress directly, eliminating the need for a box spring. It features 12 solid wood slats and strong metal construction. An anti-falling device is included to prevent the mattress from sliding.
- Recommended Mattress Height: 10-14 inches for optimal functionality with the lift mechanism.
- Do not use a box spring with this bed frame, as it may interfere with the gas lift operation and exceed weight limits.
Illustration of the anti-falling device designed to prevent the mattress and bedding from sliding.
Diagram illustrating the recommended mattress height of 10-14 inches for optimal use of the lift-up mechanism.
Maintenance
Regular maintenance will help prolong the life and appearance of your LUXOAK bed frame.
- Cleaning: Wipe down wood and metal surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
- Hardware Check: Periodically (e.g., every 3-6 months) inspect all bolts, screws, and connections. Tighten any loose hardware to maintain stability and prevent squeaking.
- Gas Lift Inspection: Ensure the gas lift mechanism operates smoothly. If you notice any stiffness or unusual movement, refer to the troubleshooting section or contact support.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed frame squeaks | Loose hardware connections. | Tighten all bolts and screws. Consider using blue threadlocker on hardware during assembly to prevent loosening. |
| Gas lift mechanism is hard to lift or crashes down. | Incorrect mattress weight, faulty gas lift, or improper installation. | Ensure your mattress weight is within the recommended range and that no box spring is used. Verify the gas lifts are installed correctly according to the assembly instructions. If the issue persists, contact customer support for assistance or replacement parts. |
| Mattress slides on the frame. | Anti-falling device not installed or improperly positioned. | Check that the anti-falling device is correctly installed at the foot of the bed frame as shown in the assembly instructions. |
| Missing or damaged parts upon delivery. | Shipping damage or packaging error. | Do not proceed with assembly. Contact the seller or manufacturer immediately for replacement parts. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | BMB007 |
| Brand | LUXOAK |
| Size | Full |
| Color | Rustic Brown |
| Material | Engineered Wood, Metal |
| Product Dimensions (L x W x H) | 82" x 56" x 39.5" |
| Item Weight | 111.5 Pounds |
| Maximum Weight Recommendation | 1000 Pounds |
| Headboard Features | Storage shelf, 2 AC Outlets, 2 USB Ports |
| Special Features | Ample Storage Space, Easy to Assemble, Squeak Resistant, Sturdy Construction, Gas Lift Mechanism, Anti-Falling Device |
| Assembly Required | Yes (2 people recommended, approx. 30 minutes) |
| Box Spring Required | No |
Product Video
Official product video demonstrating the features and functionality of the LUXOAK Lift Up Storage Bed, including the gas lift mechanism and storage headboard.
Warranty and Support
For any questions regarding assembly, missing parts, or product functionality, please contact the seller or manufacturer directly. The seller, boliyangnet, offers a 30-day easy return policy.
Please refer to your purchase documentation for specific warranty details and contact information.
