WONDOM BEA1 Bluetooth Audio Receiver User Manual

1. Introduction

The WONDOM BEA1 is a high-fidelity Bluetooth 5.3 audio receiver and USB decoder designed to integrate modern wireless audio streaming into traditional home stereo systems. Featuring the advanced QCC5171 Bluetooth module and an independent ES9018K2M Audio DAC, it supports a wide range of audio codecs including aptX HD and LDAC, ensuring superior sound quality. This manual provides detailed instructions for setting up, operating, and maintaining your BEA1 device.

2. Product Overview

2.1 Key Features

• QCC5171 Bluetooth v5.3 Module, Supporting Various Codecs (SBC, AAC, aptX, aptX HD, LDAC)
• USB Type-C (5V, 0.5A) Power Input, Supporting Bluetooth v5.3 & UAC 2.0 USB Codec Input
• Independent ES9018K2M Audio DAC for enhanced audio performance
• Bluetooth / USB to Analog / Coaxial / Optical Converter
• Supports Bluetooth LE Audio Standard
• Supports 24bit/96kHz Sampling Rate and Maximum Transmission Rate of 990kbps
• 32/80MHz Dual Processor for optimized performance and power consumption
• External Bluetooth Antenna for long-distance connection and stable audio transmission

2.2 Components and Interfaces

Front Panel: Features a Bluetooth LED indicator and gold-plated RCA analog outputs (L/R channels) for connection to amplifiers or active speakers.

Rear Panel: Includes a Bluetooth antenna connector, Coaxial output, Optical output, and a USB Type-C port for both 5V power and USB audio data input.

QCC5171 Bluetooth Module: The core Bluetooth component supporting a wide array of codecs including SBC, AAC, aptX, aptX HD, aptX-Adaptive, aptX-Lossless, and LDAC for high-quality wireless audio.

ES9018K2M Audio DAC: An independent digital-to-analog converter chip ensuring precise and high-resolution audio conversion for optimal sound fidelity.

3. Setup Guide

3.1 Power Connection

The BEA1 is powered via its USB Type-C port. Connect the provided USB cable to the USB Type-C port on the rear of the BEA1 and the other end to a 5V DC power source (e.g., a USB wall adapter, power bank, or a computer's USB port). The device requires 5V, 0.5A for operation.

Powering the BEA1: Connect the USB-C cable to a 5V power adapter, power bank, or computer USB port.

3.2 Audio Output Connection

Choose one of the following output methods to connect the BEA1 to your audio system:

• Analog Output (RCA): Connect RCA cables from the L/R analog output ports on the front of the BEA1 to the corresponding analog input ports on your amplifier, AV receiver, or active speakers.
• Coaxial Output: Connect a coaxial digital audio cable from the Coaxial output port on the rear of the BEA1 to the coaxial digital input on your DAC or receiver.
• Optical Output: Connect an optical (TOSLINK) digital audio cable from the Optical output port on the rear of the BEA1 to the optical digital input on your DAC or receiver.

Output Options: The BEA1 offers Analog (RCA), Coaxial, and Optical outputs for versatile connectivity.

Typical Bluetooth Setup: Connect your Bluetooth device to the BEA1, and the BEA1's analog output to an amplifier and speakers.

4. Operating Instructions

4.1 Bluetooth Pairing

1. Ensure the BEA1 is powered on. The Bluetooth LED on the front panel will indicate its status (e.g., blinking for pairing mode, solid for connected).
2. On your smartphone, tablet, or computer, enable Bluetooth and search for available devices.
3. Select "BEA1" from the list of discovered devices to initiate pairing.
4. Once successfully paired, the Bluetooth LED on the BEA1 will typically turn solid, and you can begin streaming audio.

4.2 USB Audio Playback (UAC 2.0)

The BEA1 can also function as a USB DAC for your computer. Connect the USB Type-C port on the BEA1 to a USB port on your computer using a USB-C to USB-A or USB-C to USB-C cable (depending on your computer's ports). Your computer should automatically recognize the BEA1 as an audio output device. Select "BEA1" as your audio output in your computer's sound settings.

USB Audio Connection: Connect the BEA1 to your computer via the USB-C port for direct audio playback.

5. Maintenance

To ensure the longevity and optimal performance of your WONDOM BEA1, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to wipe the exterior of the device. Avoid using liquid cleaners, aerosols, or abrasive materials.
• Placement: Place the device on a stable, flat surface away from direct sunlight, heat sources, and excessive moisture. Ensure adequate ventilation around the unit.
• Handling: Handle the device with care. Avoid dropping or subjecting it to strong impacts.
• Antenna: Ensure the external Bluetooth antenna is securely attached and positioned for optimal signal reception.

6. Troubleshooting

7. Specifications

Note: Dimensions are approximate based on provided diagrams.

BEA1 Dimensions: Detailed measurements of the device in millimeters and inches.

8. Warranty and Support

The WONDOM BEA1 is manufactured by Sure Electronics. For warranty information, technical support, or service inquiries, please contact Sure Electronics directly or refer to the warranty card included with your product. Please retain your proof of purchase for warranty claims.

The product has successfully obtained FCC ID and CE certifications, ensuring compliance with rigorous regulatory standards for electronic devices.

Certifications: The BEA1 is certified by FCC and CE, ensuring compliance with international standards.