Introduction
This manual provides comprehensive instructions for the operation, maintenance, and troubleshooting of your TIMNUT 4K Action Camera. Designed for sports enthusiasts, this camera allows you to capture high-definition videos and photos of your adventures, whether on land or underwater. Please read this manual thoroughly before using your camera to ensure optimal performance and longevity.
What's in the Box
- TIMNUT 4K Action Camera
- Waterproof Housing
- 64GB MicroSD Card
- 2 x 1050 mAh Batteries
- USB Cable
- Remote Control
- External Microphone
- Helmet Mount Accessories Kit
- User Manual (this document)
Image: TIMNUT 4K Action Camera with its waterproof case, remote control, external microphone, USB cable, battery charger, and 64GB SD card.
Product Overview
The TIMNUT 4K Action Camera is a compact and versatile device designed for capturing high-quality footage in various environments. It features a 4K/30fps video resolution, 20MP photo capability, Electronic Image Stabilization (EIS), and a 170° wide-angle lens.
Image: Overview of the TIMNUT 4K Action Camera highlighting features like Prerecord, 170° Wide-Angle, Waterproof 131FT, 64GB SD Card, External Mic, Remote Control, and Battery Charger.
Setup
1. Battery Installation
- Locate the battery compartment on the bottom of the camera.
- Open the compartment cover.
- Insert a fully charged 1050 mAh battery, ensuring correct polarity.
- Close the battery compartment cover securely.
2. MicroSD Card Insertion
Your camera comes with a 64GB MicroSD card. Ensure it is inserted correctly before use.
- Locate the MicroSD card slot on the side of the camera.
- Gently push the MicroSD card into the slot until it clicks into place.
- To remove, push the card in again until it springs out.
Image: Close-up of the TIMNUT 4K Action Camera demonstrating the insertion of the 64GB SD card.
3. Charging the Battery
Use the provided USB cable to charge the batteries. A full charge provides approximately 240 minutes of continuous use.
4. Using the Waterproof Housing
The waterproof housing allows the camera to be used up to a depth of 131ft (40m). Ensure the housing is properly sealed before submerging.
Image: The TIMNUT 4K Action Camera shown within its waterproof housing, with an illustration of underwater use.
Important Note: The external microphone cannot be used simultaneously with the waterproof case, as the case is designed to be completely sealed for water resistance.
Operating Instructions
Powering On/Off
- To power on, press and hold the Power button.
- To power off, press and hold the Power button again.
Video Recording
The camera supports 4K/30fps video recording with Electronic Image Stabilization (EIS).
- Select video mode.
- Press the Shutter/OK button to start recording.
- Press the Shutter/OK button again to stop recording.
Photo Capture
Capture high-resolution 20MP still images.
- Select photo mode.
- Press the Shutter/OK button to take a photo.
Electronic Image Stabilization (EIS)
The built-in 3-axis stabilization gyro helps maintain stable footage, reducing the effects of shakes and jitters during active use.
Image: Visual comparison showing the effect of Electronic Image Stabilization (EIS) being ON versus OFF during a bike ride, demonstrating smoother footage with EIS enabled.
Pre-Recording Function
The pre-recording feature ensures you don't miss crucial moments by continuously buffering video. When you press record, it saves the footage from a few seconds prior to the button press.
Connectivity
WiFi Connection (FUN DV App)
Connect your camera to your smartphone or tablet via Wi-Fi using the FUN DV app for remote control and instant sharing.
Image: The TIMNUT 4K Action Camera wirelessly connected to a smartphone, illustrating the ability to share content via the FUN DV app.
How to Connect to WiFi:
- Download and Install FUN DV App:
- Option 1: Download the FUN DV app from Google Play or the App Store.
- Option 2: Scan the QR code below to download the FUN DV app.
Scan this QR code to download the FUN DV app, or visit yolansin.com/download/fundv.
- Turn on Camera WiFi: Turn on the Wi-Fi of the camera. Verify the camera is in video media mode, then press the UP button briefly to turn on Wi-Fi. Briefly press the UP button again to turn Wi-Fi off.
- Check Wi-Fi Status: When the camera is on Wi-Fi, the Wi-Fi SSID and password will be displayed on the screen.
- Connect to Camera Wi-Fi: Connect to the camera's Wi-Fi settings according to the SSID and password displayed on the camera screen.
- Allow App Permissions: Allow all app-up permissions requested by your phone.
- Launch FUN DV App: Launch the FUN DV app on your phone and tap "connect the camera" to open the FUN DV app. Control your camera with the FUN DV app.
Troubleshooting WiFi Connection Errors:
If you encounter errors when connecting to Wi-Fi, follow these steps:
- Disable Wi-Fi Assist on your smartphone.
- Turn off Cellular Data on your smartphone.
- Reconnect to the Wi-Fi Network provided by the camera.
Image: Step-by-step guide on a smartphone screen to resolve Wi-Fi connection issues by disabling Wi-Fi Assist and cellular data.
2.4G Wireless Remote Control
The included 2.4G wireless remote control allows for convenient operation of the camera, especially during outdoor activities where direct access to the camera buttons might be difficult.
Maintenance
- Cleaning: Use a soft, lint-free cloth to clean the camera lens and screen. For the waterproof housing, rinse with fresh water after saltwater use and allow to air dry.
- Storage: Store the camera in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
- Battery Care: Fully charge batteries before first use. Do not expose batteries to fire or extreme heat.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Camera does not power on. | Low battery; Battery not inserted correctly. | Charge the battery; Reinsert battery correctly. |
| Cannot record video/take photos. | No MicroSD card; MicroSD card full; MicroSD card error. | Insert MicroSD card; Delete files or use a new card; Format MicroSD card. |
| Poor video/photo quality. | Lens dirty; Low light conditions; EIS off. | Clean the lens; Ensure adequate lighting; Turn on EIS. |
| WiFi connection issues. | Smartphone settings interfering. | Disable Wi-Fi Assist and Cellular Data on your phone before connecting to camera Wi-Fi. Refer to the "Connectivity" section. |
| Camera gets hot during use. | Normal operation for extended recording; Overheating. | Allow camera to cool down. If excessive, contact support. |
Specifications
| Feature | Detail |
|---|---|
| Brand | TIMNUT |
| Model Number | 16-pro |
| Video Resolution | 4K/30fps, 2.7K/30fps, 1080P/60fps, 1080P/30fps (with EIS) |
| Photo Resolution | 20MP |
| Image Stabilization | Electronic Image Stabilization (EIS) with 3-axis gyro |
| Field of View (FOV) | 170° Wide-Angle |
| Water Resistance | Up to 131ft (40m) with waterproof housing |
| Connectivity | Built-in WiFi (2.4G), 2.4G Wireless Remote Control |
| Storage | Supports MicroSD card (64GB included) |
| Battery | 2 x 1050 mAh (approx. 240 minutes continuous use) |
| Dimensions | 0.98 x 2.3 x 1.57 inches |
| Item Weight | 1.01 pounds |
| Color | Black |
Warranty and Support
TIMNUT is committed to providing high-quality products and excellent customer service. Your camera is backed by:
- 30-Day Refund: If you are not satisfied with your purchase.
- 365-Day Replacement: For product defects or malfunctions.
- 24-Hour Troubleshooting: Dedicated support for technical issues.
- Lifetime Support: Ongoing assistance for the lifespan of your product.
For any inquiries or support needs, please contact TIMNUT customer service. Our professional development and production team, along with 24-hour after-sales service, are here to provide you with the best protection for your purchase.