xTool RA2 Pro

Download PDF
Contents

xTool RA2 Pro Laser Rotary Attachment User Manual

Model: RA2 Pro

Introduction

The xTool RA2 Pro is a versatile 4-in-1 laser rotary attachment designed to expand the capabilities of your laser engraver. It enables precise engraving on a wide range of cylindrical and spherical objects, offering four distinct modes: Roller Rotary, Chuck Rotary, Sphere-Engraving Module, and Ring-Engraving Stud. This manual provides instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your RA2 Pro.

Key Features

  • 4-in-1 Versatility: The RA2 Pro integrates Roller Rotary, Chuck Rotary, Sphere-Engraving Module, and Ring-Engraving Stud, allowing engraving on various shapes including wine glasses, tumblers, baseball bats, rings, and spheres.
  • High Precision and Speed: Features a precision stepper motor with a minimum angle of 0.45° for detailed engraving. Vector engraving speed can reach up to 360°/s. The chuck rotary's soft-pad covering jaws ensure a secure grip on objects.
  • Wide Compatibility: Compatible with xTool S1, F1, F1 Ultra, P2, D1 Pro, M1 Ultra, and most other laser engravers. Supports software such as Laserbox Basic, LaserGRBL, and LightBurn. A riser base is required for use with certain engravers.
  • Durable Construction: Constructed from anodized aluminum alloy with a corrosion-proof coating for long-term reliability. Features an adjustable Z-axis and chuck rotary module to accommodate various object sizes and shapes.
  • User-Friendly Design: Pre-assembled and modular for quick setup. Offers easy adjustment of module height and chuck diameter.

Setup

The xTool RA2 Pro is designed for quick and easy setup due to its pre-assembled and modular nature. Follow these general steps to integrate it with your laser engraver:

  1. Unpacking: Carefully remove all components from the packaging. Verify that all parts listed in the packing list are present.
  2. Placement: Position the RA2 Pro on a stable surface within your laser engraver's working area. Ensure sufficient clearance for the rotary attachment and the object to be engraved. For certain xTool models (S1, F1, F1 Ultra, P2, M1 Ultra), a riser base is required to provide adequate height.
  3. Connection: Connect the RA2 Pro to your laser engraver using the provided cables. Refer to your specific laser engraver's manual for detailed port connections.
  4. Software Configuration: Open your laser engraving software (e.g., Laserbox Basic, LaserGRBL, LightBurn). Configure the software to recognize and utilize the rotary attachment. This typically involves selecting the rotary axis option in the software settings.
  5. Initial Calibration: Perform an initial calibration as per your laser engraver's software instructions to ensure accurate rotation and positioning.
xTool RA2 Pro pre-assembled unit with included tools like a mini level, tape measure, and hex key.

Image: The xTool RA2 Pro unit, showcasing its pre-assembled state and the included setup tools such as a mini level, tape measure, and hex key, indicating ease of installation.

Operating Instructions

The RA2 Pro offers four distinct modes for engraving various objects. Select the appropriate mode and attachment for your project.

1. Roller Rotary Mode

Ideal for long, regular cylindrical objects such as bottles, rolling pins, or long tumblers.

  • Attach the roller modules to the main unit.
  • Place the cylindrical object on the rollers, ensuring it is level and centered.
  • Adjust the roller spacing to securely hold the object.
  • Proceed with engraving as per your laser software's instructions.
xTool RA2 Pro in Roller Rotary mode, engraving a wine glass.

Image: The RA2 Pro configured for Roller Rotary mode, demonstrating engraving on a wine glass.

2. Chuck Rotary Mode

Suitable for objects that require a firm grip, including irregular cylinders or objects with handles like mugs and tumblers.

  • Install the chuck rotary module.
  • Secure the object using the chuck's soft-pad jaws. Ensure the object is centered and held firmly without excessive pressure.
  • Adjust the Z-axis if necessary to accommodate the object's height.
  • Proceed with engraving.
xTool RA2 Pro in Chuck Rotary mode, engraving a tumbler.

Image: The RA2 Pro in Chuck Rotary mode, shown engraving a tumbler.

3. Sphere-Engraving Module

Designed for engraving spherical objects such as baseballs or decorative balls.

  • Attach the sphere-engraving module.
  • Carefully place the spherical object onto the module, ensuring it is stable and centered.
  • Adjust the module to cradle the sphere securely.
  • Initiate the engraving process.
xTool RA2 Pro in Sphere Rotary mode, engraving a baseball.

Image: The RA2 Pro configured for Sphere Rotary mode, illustrating engraving on a baseball.

4. Ring-Engraving Stud

Used for precise engraving on the interior or exterior of rings.

  • Install the ring-engraving stud onto the chuck rotary.
  • Mount the ring onto the stud. Ensure it is snug and properly aligned for the desired engraving area.
  • Adjust the laser focus and engraving parameters.
  • Begin engraving.
xTool RA2 Pro in Ring Rotary mode, engraving a ring.

Image: The RA2 Pro set up for Ring Rotary mode, demonstrating engraving on a ring.

Compatibility

The xTool RA2 Pro is designed for broad compatibility with various laser engravers and software platforms.

  • Compatible Laser Engravers: xTool S1, xTool F1, xTool F1 Ultra, xTool P2, xTool D1 Pro, xTool M1 Ultra, and most other laser engravers on the market.
  • Riser Requirement: For optimal use with xTool S1, F1, F1 Ultra, P2, and M1 Ultra, a riser base is required to provide adequate working height for the rotary attachment.
  • Supported Software: Laserbox Basic, LaserGRBL, LightBurn. Ensure your software is updated to the latest version for full compatibility and features.
Compatibility chart showing xTool RA2 Pro with M1 Ultra, S1, P2, and F1 laser engravers.

Image: Visual representation of the xTool RA2 Pro's compatibility with various xTool laser engravers, including M1 Ultra, S1, P2, and F1.

Applications

The RA2 Pro significantly expands the range of objects you can engrave. Examples include:

  • Wine glasses and champagne flutes
  • Yeti tumblers and other insulated cups
  • Baseball bats and other sporting equipment
  • Rings (interior and exterior)
  • Spherical objects like balls
  • Mugs with handles
  • Beverage cans, eggshell cups, goblets, wine bottles
  • Rolling pins, canisters, flowerpots, pet bowls
Grid of various objects engraved with xTool RA2 Pro, including mugs, tumblers, goblets, necklaces, rings, flowerpots, pet bowls, baseballs, canisters, rolling pins, and wine bottles.

Image: A collage of diverse items, such as mugs, tumblers, and rings, demonstrating the wide range of engraving possibilities with the xTool RA2 Pro.

Maintenance

To ensure the longevity and optimal performance of your xTool RA2 Pro, regular maintenance is recommended:

  • Cleaning: Regularly clean the rotary attachment, especially the rollers, chuck jaws, and any moving parts, to prevent dust and debris buildup. Use a soft, dry cloth. For stubborn residue, a slightly damp cloth can be used, ensuring no moisture enters electronic components.
  • Lubrication: Periodically check for smooth movement of mechanical parts. If any friction is observed, apply a small amount of light machine oil to the moving joints and bearings, avoiding contact with belts.
  • Belt Tension: Inspect the drive belt for proper tension. It should be taut but not overly tight. Adjust if necessary according to the main laser engraver's maintenance guidelines.
  • Storage: When not in use, store the RA2 Pro in a clean, dry environment, away from direct sunlight and extreme temperatures.

Troubleshooting

If you encounter issues with your xTool RA2 Pro, consider the following common troubleshooting steps:

  • Object Slippage:
    • Ensure the object is securely fastened in the chuck or properly seated on the rollers.
    • Verify that the chuck jaws or rollers are clean and free of debris that might reduce grip.
    • For roller mode, check if the object's surface is too smooth; consider adding a non-slip material if appropriate for the object.
  • Inaccurate Engraving/Distortion:
    • Confirm the object is perfectly level and centered in the rotary attachment.
    • Check software settings for correct rotary axis configuration and object dimensions.
    • Ensure the RA2 Pro's connections to the laser engraver are secure.
    • Verify that the drive belt is not loose or damaged.
  • Rotary Not Responding:
    • Check all cable connections between the RA2 Pro and the laser engraver.
    • Restart both the laser engraver and the software.
    • Ensure the rotary attachment is enabled in your laser engraving software.

If these steps do not resolve the issue, please contact xTool customer support for further assistance.

Specifications

FeatureDetail
Product Dimensions7.4 x 3.7 x 18 inches
Item Weight5.35 pounds
ManufacturerMakeblock Co., Ltd.
First Available DateSeptember 14, 2023

Warranty and Support

xTool provides customer service and professional technical support for the RA2 Pro. For warranty information, please refer to the official xTool website or the warranty card included with your product. For technical assistance, troubleshooting, or inquiries, you can reach xTool support through the following channels:

  • Email support
  • Live chat
  • Phone support
  • Official xTool Facebook group for community support

Contact details are typically available on the official xTool website: www.xtool.com

© 2023 xTool. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.